added lithuanian language dummy file (copy from default one) as a template to be translated #878

Delete Readme.txt

.github/CONTRIBUTING.md

@@ -0,0 +1,24 @@
+**Hello, and welcome to the mRemoteNG project!**
+
+Open source software is best when shared with others. This also applies to the work that goes into the software. Your ideas and passion are what make this software great!
+There are many ways that you can help improve mRemoteNG, even if you don't know how to program:
+
+- add documentation or "how-to" articles on the Wiki
+- answer support questions on the forum
+- add or improve a translation
+- submit a pull request for a bug or feature ticket
+
+The GitHub Issue tracker is our preferred channel for bug reports and feature requests.
+For questions or general discussion, please use [our public Gitter chat](https://gitter.im/mRemoteNG/PublicChat) or the [forum](http://forum.mremoteng.org).
+
+If you find a security vulnerability, do **NOT** open an issue. Email security@mremoteng.org instead.
+
+You'll find all information on our GitHub workflow in our [Wiki](https://github.com/mRemoteNG/mRemoteNG/wiki), or you can use these links:
+
+- [Branches](https://github.com/mRemoteNG/mRemoteNG/wiki/Branches)
+- [Bug Repots](https://github.com/mRemoteNG/mRemoteNG/wiki/Bug-Reports)
+- [Feature Requests](https://github.com/mRemoteNG/mRemoteNG/wiki/Feature-Requests)
+- [Pull Requests](https://github.com/mRemoteNG/mRemoteNG/wiki/Pull-Requests)
+
+Want to help but don't know where to start? Check out the issues that we've labeled with [`Help Wanted`](https://github.com/mRemoteNG/mRemoteNG/issues?q=is%3Aissue+is%3Aopen+label%3A%22Help+Wanted%22) or [`ready`](https://github.com/mRemoteNG/mRemoteNG/issues?utf8=%E2%9C%93&q=is%3Aissue%20is%3Aopen%20label%3A%22ready%22). These will vary in difficulty, but should be possible for new contributors.
+Even if you don't know C# you can heck out the issues that we've labeled with [`Documentation`](https://github.com/mRemoteNG/mRemoteNG/labels/Documentation).

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,30 @@
+<!--- Provide a general summary of the issue in the Title above -->
+
+## Expected Behavior
+<!--- If you're describing a bug, tell us what should happen -->
+<!--- If you're suggesting a change/improvement, tell us how it should work -->
+
+## Current Behavior
+<!--- If describing a bug, tell us what happens instead of the expected behavior -->
+<!--- If suggesting a change/improvement, explain the difference from current behavior -->
+
+## Possible Solution
+<!--- Not obligatory, but suggest a fix/reason for the bug, -->
+<!--- or ideas how to implement the addition or change -->
+
+## Steps to Reproduce (for bugs)
+<!--- Provide an unambiguous set of steps to reproduce -->
+<!--- this bug. Include code to reproduce, if relevant -->
+1.
+2.
+3.
+4.
+
+## Context
+<!--- How has this issue affected you? What are you trying to accomplish? -->
+<!--- Providing context helps us come up with a solution that is most useful in the real world -->
+
+## Your Environment
+<!--- Include as many relevant details about the environment you experienced the bug in -->
+* Version used:
+* Operating System and version (e.g. Windows 10 1709 x64):

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,32 @@
+<!--- Provide a general summary of your changes in the Title above -->
+
+## Description
+<!--- Describe your changes in detail -->
+
+## Motivation and Context
+<!--- Why is this change required? What problem does it solve? -->
+<!--- If it fixes an open issue, please link to the issue here. -->
+
+## How Has This Been Tested?
+<!--- Please describe in detail how you tested your changes. -->
+<!--- Include details of your testing environment, and the tests you ran to -->
+<!--- see how your change affects other areas of the code, etc. -->
+
+## Screenshots (if appropriate):
+
+## Types of changes
+<!--- What types of changes does your code introduce? Put an `x` in all the boxes that apply: -->
+- [ ] Bug fix (non-breaking change which fixes an issue)
+- [ ] New feature (non-breaking change which adds functionality)
+- [ ] Breaking change (fix or feature that would cause existing functionality to change)
+- [ ] Updated translation
+
+## Checklist:
+<!--- Go over all the following points, and put an `x` in all the boxes that apply. -->
+<!--- If you're unsure about any of these, don't hesitate to ask. We're here to help! -->
+- [ ] I have read the **CONTRIBUTING** document.
+- [ ] My code follows the code style of this project.
+- [ ] This pull request does not target the master branch.
+- [ ] I have updated the changelog file accordingly.
+- [ ] My change requires a change to the documentation.
+- [ ] I have updated the documentation accordingly.

.gitignore

@@ -283,5 +283,6 @@ Installer Projects/Installer/Fragments/HelpFilesFragment.wxs
 InstallerProjects/Installer/Fragments/FilesFragment.wxs
 InstallerProjects/Installer/Resources/License.rtf
 
-# user preference: .editorconfig - http://editorconfig.org/
-.editorconfig
+# gh-pages info
+runlocal.bat
+/_site

CHANGELOG.TXT

@@ -1,970 +0,0 @@
-1.75 Alpha 1 (2016-07-08):
-
-  General Changes:
-  ----------------
-  Additional code cleanup
-  
-  
-  Fixes:
-  ------
-  MR-905: mRemoteNG crashes at startup (in FIPS policy check)
-  MR-902: mRemoteNG crashes after locking/unlocking the local system after loading a VNC connection
-  
-  
-1.74 (2016-06-28):
-
-  Supported Platforms/Components:
-  -------------------------------
-  Windows 7 SP1 (with RDP Client v8: KB2592687/KB2923545) or later
-  .NET Framework 4 or later
-  XULRunner is no longer required for Gecko support (see below)
-  
-  
-  General Changes:
-  ----------------
-  Converted source from Visual Basic to C Sharp
-  Lots of code refactoring/clean up/general stability changes
-  MR-714: Removed Keyboard shortcut functionality
-    - Introduced in 1.73 beta that was never officially released
-    - This caused stability issues
-    - May be re-added in a future release
-    - Removal does *NOT* impact the ability to send keyboard shortcuts to RDP sessions (when redirect key combinations is set to "yes")
-  MR-559: Removed RDP Sessions panel functionality. This required a library for which no trusted origin/source could be located
-  Removed a bunch of old code/libraries and replaced them accordingly
-  
-  
-  Security Updates:
-  -----------------
-  MR-775, MR-745: Updated PuTTY to 0.67
-  
-  
-  Features/Enhancements:
-  ----------------------
-  Updated to latest DockPanelSuite and enabled a slick new theme!
-  MR-145: Installer is now MSI based
-  MR-255: Updated RDP Client to version 8
-  MR-389: Updates to IE rendering engine
-    - Support for latest version of IE (9-11)
-    - Dropped support for IE 7 & IE 8
-  MR-850: Replaced XULRunner with GeckoFx
-    - No need to manually configure to have the Gecko rendering engine available now
-    - Install image is now significantly larger due to the inclusion of the Gecko Engine
-  MR-821: Initial Japanese translation included
-  Port Scan is now Asynchronous (and is significantly faster)
-  
-  
-  Fixes:
-  ------
-  MR-874: Added work-around to installer to ignore installation prerequisites
-  MR-884: Slow startup in some scnearios checking authenticode certificate
-  MR-872: Crash in External Tools when arguments aren't quoted
-  MR-854: crashes when right clicking on connection tab
-  MR-852: Option "Allow only a single instance of the application" non-functional
-  MR-836: Trying to delete a folder of connections only deletes 2 connections at a time
-  MR-824, MR-706: Suppress Script Errors when using the IE rendering engine
-  MR-822: Improve RDP error code messages
-  MR-640: Fixed Inheritance not working
-  MR-639: RDP: Connect to console session
-  MR-610, MR-582, MR-451: RDP: Protocol Error 3334 or exceptions with large number of connections open
-    - This problem appears largely resolved by most reports and testing
-    - Further workarounds/problem avoidance: Disable Bitmap Caching on all RDP session configuration
-  MR-429: Display issue on the Options -> Advanced panel
-  MR-385: Inheritance settings lost when moving item to the root of the tree
-  
-  
-  
-1.73 Beta 2 (NEVER RELEASED):
-  Fixed issue MR-619 - Keyboard shortcuts stop working after locking the screen with Win+L
-  Added support for importing files from PuTTY Connection Manager.
-  Improved the import and export functionality.
-
-
-
-1.73 Beta 1 (2013-11-19):
-  Added feature MR-16 - Add keyboard shortcuts to switch between tabs
-  Added feature MR-141 - Add a default protocol option
-  Added feature MR-212 - Add option to connect without credentials
-  Added feature MR-512 - Add support for importing files from Remote Desktop Connection Manager
-  Added feature MR-547 - Add support for Xming Portable PuTTY
-  Made improvement MR-250 - Show the name of the selected connection tab in the title of the window
-  Made improvement MR-367 - Make the 'Connect' button on the 'Quick Connect' toolbar a forced dropdown
-  Made improvement MR-419 - Password prompt dialog should have a meaningful window title
-  Made improvement MR-486 - Allow escaping of variable names for external tools
-  Made improvement MR-590 - Make panels docked to the edge of the window keep their size
-  Fixed issue MR-187 - F7 keyboard shortcut for New Folder conflicts with remote connections
-  Fixed issue MR-523 - Changes to external tools are not saved until exiting the program
-  Fixed issue MR-556 - Export fails when overwriting an existing file
-  Fixed issue MR-594 - Crash on startup if write access is denied to the IE browser emulation registry key
-  Fixed issue MR-603 - Some configuration options are still shown even when inheritance is enabled
-  MR-590: Added "Reset" to config panel context menu to allow resetting some config settings to their default value.
-  Added and improved menu icons.
-  Removed misleading log messages about RD Gateway support.
-  Removed invalid "Site" configuration option from PuTTY Saved Sessions.
-  Fixed PuTTY Saved Sessions still showing if all saved sessions are removed.
-  Fixed config panel showing settings from previously loaded connection file after loading a new one.
-  Improved handling of variables in external tool arguments.
-
-
-
-1.72 (2013-11-13):
-  Fixed issue MR-592 - Unable to run VBS script as an external tool
-  Fixed issue MR-596 - Incorrect escaping of quotation marks in external tool arguments
-
-
-
-1.71 (2013-10-29):
-  Fixed issue MR-574 - Crash when retrieving RDP session list if eolwtscom.dll is not registered
-  Fixed issue MR-578 - Connections file is reset
-  Fixed log file not showing operating system version on Windows XP and Windows Server 2003.
-  Fixed the wrong connections file opening on startup under certain conditions.
-  Fixed checking for updates even when disabled.
-  Improved error reporting when loading connections files.
-  Removed warning message when mRemoteNG is started for the first time about new connections file being created.
-
-
-
-1.71 Release Candidate 2 (2013-10-16):
-  Fixed issue MR-560 - Cannot Auto-Update With Open Connections: Unable to find an entry point named 'TaskDialogIndirect' in DLL 'ComCtl32'
-  Fixed issue MR-565 - Double Folder keep heritage on the initial Folder
-  Fixed issue MR-566 - Typo in German UI Automatic Update Settings
-  Fixed duplicated folders possibly being named "New Connection" instead of the original folder's name.
-
-
-
-1.71 Release Candidate 1 (2013-10-01):
-  Fixed issue MR-495 - Having a negative range in port scan creates memory exhaustion.
-  Fixed issue MR-514 - Window Proxy test failed without close button
-  Fixed issue MR-521 - Right-Clicking in "Sessions" panel crashes mRemoteNG
-  Fixed issue MR-525 - Could not start on windows 7 64bit
-  Fixed issue MR-535 - SQL error saving Connections
-  Fixed issue MR-538 - RDP loses connection when hiding config or connections pane
-  Fixed issue MR-542 - Wrapped putty has security flaw
-  Made minor improvements to the port scan functionality.
-  Fixed possible cross-thread operation exception when loading connections from SQL.
-  Fixed PuTTY Saved Sessions not showing after loading a new connections file.
-  Updated PuTTY to version 0.63.
-  Updated translations.
-  Added Chinese (Traditional) translation.
-  Added partial Greek and Hungarian translations.
-
-
-
-1.71 Beta 5 (2013-06-09):
-  Fixed issue MR-491 - Could not start RDP Connection
-  Fixed issue MR-499 - TS Gateway is not working in latest release 1.71
-  Fixed typo in SQL queries.
-
-
-
-1.71 Beta 4 (2013-05-28):
-  Added feature MR-435 - Add digital signature check to updater
-  Fixed issue MR-255 - The version of the RDP AX client should be updated to 7
-  Fixed issue MR-392 - Sessions Panel - context menu entries need to be context aware
-  Fixed issue MR-422 - Gives error Object reference not set to an instance of an object.
-  Fixed issue MR-424 - Import of a few Linux SSH2 hosts discovered via the port scan tool results in a UE
-  Fixed issue MR-439 - MRemoteNG 1.70 does not start
-  Fixed issue MR-440 - RDP import with non-standard port
-  Fixed issue MR-443 - Instructions for eolwtscom.dll registration for Portable version are inaccurate
-  Fixed issue MR-446 - Putty saved sessions show in connection panel
-  Fixed issue MR-459 - Maximized -> Minimized -> Restored results in mangled active display
-  Fixed issue MR-463 - Add support for LoadBalanceInfo to RDP
-  Fixed issue MR-470 - Quick Connect to Linux server uses invalid credentials
-  Fixed issue MR-471 - PuTTY Saved Sessions disappears from connection list
-  Fixed issue MR-487 - Initiate connections on MouseUp event
-  Added PuTTY Session Settings command to the Config panel for PuTTY Saved Sessions.
-  Updated translations.
-  Added Norwegian (Bokmal) and Portuguese (Brazil) translations.
-  Added Spanish translation to the installer.
-  Fixed an exception or crash when choosing unnamed colors for themes.
-  Fixed possible error "Control does not support transparent background colors" when modifying themes.
-  Fixed changes to the active theme not being saved reliably.
-  Fixed handling of the plus (+) character in PuTTY session names.
-  Changed Internet Explorer to no longer force IE7 compatibility mode.
-  Changed the "Launch PuTTY" button in the "Options" dialog to open PuTTY from the path the user has currently set, instead of what was previously saved.
-  Improved update and announcement checking.
-  Improved the PuTTY Saved Sessions list to update automatically when any changes are made.
-  Improved loading time of large connection files.
-  Lowered required version of RDC from 6.1 to 6.0.
-  Updated VncSharpNG to 1.3.4896.25007.
-
-
-
-1.71 Beta 3 (2013-03-20):
-  Fixed issue MR-397 - Putty disappears from the screen
-  Fixed issue MR-398 - Full Screen mode doesn't correctly make use of available space
-  Fixed issue MR-402 - scrollbar touch moves putty window
-  Fixed issue MR-406 - Items disappear from External Tools toolbar when accessing External Tools panel
-  Fixed issue MR-410 - Unhandled exception when clicking New button under Theme
-  Fixed issue MR-413 - Can't use aplication
-  Fixed new connections having a globe icon.
-  Fixed the category names in the themes tab of the options dialog on Windows XP not showing correctly.
-  Fixed PuTTY saved sessions with spaces or special characters not being listed.
-
-
-
-1.71 Beta 2 (2013-03-19):
-  Added feature MR-336 - Customizable background color for the windows/panels
-  Added feature MR-345 - Two separate options for confirming closure of Tabs and Connection Panels
-  Added feature MR-346 - Option to show/hide the description box at the bottom of the Config panel
-  Added feature MR-351 - Import connections from PuTTY
-  Fixed issue MR-354 - Re-ordering tabs doesn't give good, reliable visual feedback
-  Fixed issue MR-375 - Changing a connection's icon using the picture button should immediately update Icon field
-  Fixed issue MR-377 - Several redundant panels can be opened
-  Fixed issue MR-379 - Connection variables not working with external tools
-  Fixed issue MR-381 - Notifications panel - whitespace context menu allows Copy and Delete on nothing
-  Fixed issue MR-401 - Checkbox misaligned
-  The username and domain settings are now hidden for VNC connections since they are not supported.
-  Changed "Automatically get session information" to be disabled by default.
-  RDP connections can now be switched to full screen mode when redirect key combinations is enabled.
-
-
-
-1.71 Beta 1 (2013-03-04):
-  Added feature MR-329 - Create Option to disable the "Quick: " prefix
-  Fixed issue MR-67 - Sort does not recursively sort
-  Fixed issue MR-117 - Remote Session Info Window / Tab does not populate
-  Fixed issue MR-121 - Config pane not sorting properties correctly when switching between alphabetical and categorized view
-  Fixed issue MR-130 - Issues duplicating folders
-  Fixed issue MR-142 - Start of mRemoteNG takes about one minute and consumes excessive CPU
-  Fixed issue MR-158 - Password field not accepting Pipe
-  Fixed issue MR-330 - Portable version saves log to user's profile folder
-  Fixed issue MR-333 - Unnecessary prompt for 'close all open connections?'
-  Fixed issue MR-342 - Incorrect view in config pane of new connection after viewing default inheritance
-  Fixed issue MR-352 - Passwords with " (quotation mark) and # (hash key) characters make mRemoteNG to open PuttyNG dialog
-  Fixed issue MR-362 - Rename 'Screenshot Manager' to 'Screenshots' on the View menu to match Panel name
-  Added detection of newer versions of connection files and database schemata. mRemoteNG will now refuse to open them to avoid data loss.
-  Improved appearance and discoverability of the connection search box.
-  If RDC 7.0 or higher is installed, the connection bar is no longer briefly shown when connecting to an RDP connection with redirect key combinations enabled.
-  If RDC 8.0 or higher is installed, RDP connections automatically adjust their size when the window is resized or when toggling full screen mode.
-
-
-
-1.70 (2013-03-07):  
-  Fixed issue MR-339 - Connection group collapses with just one click
-  Fixed issue MR-340 - Object reference not set to an instance of an object.
-  Fixed issue MR-344 - Move "Always show panel tabs" option
-  Fixed issue MR-350 - VerifyDatabaseVersion (Config.Connections.Save) failed. Version string portion was too short or too long.
-  Fixed issue MR-355 - Moving sub folders to top level causes property loss
-  Fixed tabs not closing on double-click when the active tab is a PuTTY connection.
-
-
-
-1.70 Release Candidate 2 (2013-02-25):
-  Fixed issue MR-332 - Can't select different tab with one click after disconnecting existing tab
-  Fixed issue MR-338 - PuTTYNG crashing on fresh install of mRemoteNG
-  Re-enabled PuTTYNG integration enhancements on Windows 8
-
-
-
-1.70 Release Candidate 1 (2013-02-22):
-  Fixed issue MR-183 - Error trying to save connections when using SQL - Invalid column name _parentConstantId
-  Fixed issue MR-225 - Tabs do not open in a panel until multiple panels are displayed.
-  Fixed issue MR-229 - Integrated PuTTY doesn't work in Windows 8 RP
-  Fixed issue MR-264 - Windows 8 support
-  Fixed issue MR-317 - Difficulty right-clicking on Tab
-  Fixed issue MR-318 - Wrong tab gets selected when tab names overflow on the tab bar
-  Fixed issue MR-321 - New connection panel doesn't get panel header if its the only one or is moved
-  Fixed issue MR-322 - Connection Button not listing servers
-  Added option to always show panel tabs.
-  Fixed "Decryption failed. Padding is invalid and cannot be removed." notification.
-  Fixed KiTTY opening in a separate window when using a saved session.
-
-
-
-1.70 Beta 2 (2013-02-18):
-  Fixed issue MR-47 - Silent Installation Prompts for Language
-  Fixed issue MR-54 - Error When disconnecting from SSL channel RDP
-  Fixed issue MR-58 - Bug when duplicating connection in connection view 
-  Fixed issue MR-68 - Config Window Loses Options
-  Fixed issue MR-71 - Minimizing mRemoteNG causes temporary re-size of Putty sessions (windows)
-  Fixed issue MR-80 - Reconnect previous sessions
-  Fixed issue MR-81 - Problem Duplicating Folder w/ Sub-Folders
-  Fixed issue MR-85 - Microsoft .NET Framework warning
-  Fixed issue MR-86 - Citrix GDI+ Error when screen is locked
-  Fixed issue MR-96 - When pressing SHIFT+F4 to create a new connection inside a folder, the new connections doesn't inherit any properties from its parent
-  Fixed issue MR-101 - Collapse all folders causes a NullReferenceException
-  Fixed issue MR-165 - Can't close About window if it is the last tab
-  Fixed issue MR-166 - Inheritance button is disabled on some connections
-  Fixed issue MR-167 - Name and description of properties not show in inheritance list
-  Fixed issue MR-171 - Inherit configuration not showing friendly names for each inherit component
-  Fixed issue MR-172 - RDGatewayPassword is unencrypted in confCons.xml file
-  Fixed issue MR-174 - Trailing Space on a Hostname/IP will cause the connection not to happen.
-  Fixed issue MR-175 - Problem with focus when 2 or more PuTTY sessions opened
-  Fixed issue MR-176 - Del key while editing connection name triggers 'Delete Connection'
-  Fixed issue MR-178 - 3 different panels crashes all connections
-  Fixed issue MR-181 - Sessions on startup
-  Fixed issue MR-190 - Can't click on tab/session
-  Fixed issue MR-196 - Cannot export list without usernames and passwords
-  Fixed issue MR-199 - when using screen inside putty, screen becomes dead when reduce mremoteNG
-  Fixed issue MR-202 - The Connection "Tab" show Ampersands as underscores.
-  Fixed issue MR-214 - Hostname/IP reset
-  Fixed issue MR-224 - Session tabs become un-clickable after duplicating a tab or opening a new one in the same panel
-  Fixed issue MR-233 - Backslash at end of password prevents success of putty invocation and corresponding auto-logon
-  Fixed issue MR-235 - Config file gets corrupted when leaving the password entry box with ESC
-  Fixed issue MR-264 - Windows 8 support
-  Fixed issue MR-277 - Inheritance configuration button not appear in configuration tab
-  Fixed issue MR-284 - SSH: Text not showing properly
-  Fixed issue MR-299 - mRemoteNG crashes while using remotely (Windows XP remote desktop)
-  Fixed issue MR-306 - Fatal .NET exception on program start
-  Fixed issue MR-313 - PuTTY window not maximized when loading from saved session
-  mRemoteNG now requires .NET Framework 3.0 instead of 2.0.
-  Updated translations.
-  Added translations for Spanish (Argentina), Italian, Polish, Portuguese, Chinese (Simplified).
-  Improved the use of Tab and Shift-Tab to cycle through entries in the Config grid.
-  Improved loading of XML files from older versions of mRemote/mRemoteNG.
-
-
-1.70 Beta 1 (2012-02-27):
-  Fixed issue MR-77 - VerifyDatabaseVersion (Config.Connections.Save) failed. Version string portion was too short or too long.
-  Fixed issue MR-78 - Renaming Connections
-  Fixed issue MR-79 - MoveUp/Down item doesn't work + Sort button broken
-  Fixed issue MR-93 - Regional settings problem when using SQL connection in mRemoteNG
-  Fixed issue MR-97 - Integrate Dutch translation
-  Fixed issue MR-98 - Integrate Russian and Ukranian translations
-  Fixed issue MR-99 - Integrate Spanish translation
-  Fixed issue MR-131 - RD Gateway does not respect setting for use different credentials
-  Added compatibility check for "Use FIPS compliant algorithms" security setting.
-  Improved reporting of errors when encrypting and decrypting connection files.
-  Added partial Polish translation.
-  The panel tabs are now hidden if only one panel is open.
-  Fix focus issue with RDP connections when changing tabs.
-  Show changes live as connection tabs are being dragged around to change their order.
-  Updated PuTTY to version 0.62.
-  Improved error handling when loading connection files.
-  Fixed bugs with creating a new connection file.
-  A backup of the connection file is saved when it is loaded. The most recent ten backup copies are kept.
-  Added the option to use a smart card for RD Gateway credentials.
-  Made the use of CredSSP for RDP connections optional.
-  Updated VncSharpNG to version 1.2.4440.36644.
-  Added debugging symbols for VncSharpNG.
-
-
-
-1.69 (2011-12-09):
-  Fixed issue #66 - Fresh Install Fails to Create Config
-  Fixed issue #69 - Connection file gets erased
-  Fixed issue #72 - scrollbars added to RDP window after minimize/restore of mRemoteNG
-  Disabled automatic updates in the portable edition
-  Fixed file name in window title changing when exporting an XML file.
-  Fixed Use only Notifications panel checkbox.
-  Updated PuTTY to version 0.61
-  Binaries are now digitally signed
-  Added Credits, License, and Version History items to the Start Menu and made Start Menu item names localizable.
-
-
-
-1.68 (2011-07-07):
-  Fixed issue #48 - VerifyDatabaseVersion fails with new (empty) database tables.
-  Fixed issue #60 - Can't save connections file
-  Fixed issue #62 - Connection file error upon launch.
-
-
-
-1.67 (2011-06-05):
-  Fixed migration of external tools configuration and panel layout from Local to Roaming folder.
-  Disable ICA Hotkeys for Citrix connections.  Fixes issue with international users.
-  Added a language selection option so users can override the language if they don't want it automatically detected.
-  Added partial French translation to the application.
-  Addded Thai translation to the installer.
-  Updated graphics in the installer to mRemoteNG logo.
-  Fixed RD Gateway default properties and RDP reconnection count setting not being saved.
-  Fixed bug 33 - IPv6 doesn't work in quick Connect box.
-  Moved the items under Tools in the Connections panel context menu up to the top level.
-  Added buttons for Add Connection, Add Folder, and Sort Ascending (A-Z) to the Connections panel toolbar.
-  Fixed rename edit control staying open when collapsing all folders.
-  Changed sorting to sort all subfolders below the selected folder.
-  Allow sorting of connections if a connection entry is selected.
-  Fixed adding a connection entry if nothing is selected in the tree.
-  Added 15-bit Color RDP setting.
-  Fixed loading of RDP Colors setting from SQL.
-  Added Font Smoothing and Desktop Composition RDP settings.
-  Improved error handling when loading XML connection files.
-  Added the mRemoteNG icon to the list of selectable icons for connection entries.
-  Added confirmation before closing connection tabs.
-  Fixed bug 42 - Maximized location not remembered with multiple monitors.
-  Improved loading and saving of window location.
-  Removed flickering on start up.
-  Changed the Options page into a normal dialog.
-  Improved Reset Layout function.
-  Changed to use full four part version numbers with major, minor, build, and revision.
-  Changed hard coded SQL database name into a user configurable setting.
-  Fixed tab order of controls in Options dialog.
-  Fixed bug 45 - Changing some settings in the config file may not save.
-
-
-
-1.66 (2011-05-02):
-  Fixed connections not working
-
-
-
-1.65 (2011-05-02):
-  Fixed Ctrl-Tab and Ctrl-Shift-Tab not working in any other applications while mRemoteNG is running
-  Ctrl-Tab and Ctrl-Shift-Tab no longer work to switch tabs within mRemoteNG
-  Fixed bug 36 - Install creates shortcuts only for the installing user
-  Fixed bug 38 - Application uses the wrong Application Data settings folder (in Local Settings)
-  Added code to the installer to check that the user is in the 'Power Users' or 'Administrators' group
-
-
-
-1.64 (2011-04-27):
-  Fixed bug 6 - VNC CTRL+key & keyboard combo mappings are broken
-  Fixed bug 12 - Tab switch is not working in config panel
-  Fixed bug 14 - RDP Connection authentication problem
-  Fixed bug 22 - External App parameter macro expansion doesn't work with "try to integrate"
-  Fixed bug 25 - Unhandled exception when mRemoteNG opens
-  Added multilanguage support and German translation to the application
-  Added Czech, Dutch, French, German, Polish, and Spanish translations to the installer
-  Added Ctrl-Tab hotkey to switch to the next tab and Ctrl-Shift-Tab to switch to the previous tab
-  Added Tab key to cycle through entries in the Config grid and Shift-Tab to cycle in reverse
-  Added ability to configure external tools to run before or after a connection is established
-  Fixed missing parameters in macro expansion for external tools
-  Fixed RD Gateway and other inheritance bugs
-  Changed how new connection files are created
-  Changed the internal namespace of the application to mRemoteNG instead of mRemote
-  Added credit for the DockPanel Suite to the About page
-  Updated DockPanel Suite to version 2.5 RC1
-  Updated VNCSharpNG to correct Ctrl and Alt key pass-through behavior
-
-
-
-1.63 (2010-02-02):
-  New icon and logo
-  Fixed problems moving or resizing the main window while PuTTY (SSH/telnet/rlogin/raw) connections are open
-  Fixed PuTTY processes not closing on Vista and 7 with UAC enabled
-  Updated DockPanel Suite from 2.2.0 to 2.3.1
-  Fixed error if the mouse is clicked outside of the remote screen area of a VNC connection
-  Fixed flashing and red lines at bottom of the window on first run
-  Added View->Reset Layout menu item
-  Added F11 shortcut key to View->Full Screen
-  Improved RDP error reporting
-  Added support for Credential Security Support Provider (CredSSP) which is required for Network Level Authentication (NLA)
-  Added support for connecting through Remote Desktop Gateway servers
-  Popups can now be allowed in Internet Explorer by holding Ctrl+Alt when clicking a link
-  Added PuTTY Settings item to tab context menu
-
-
-
-1.62 (2010-01-19):
-  Switched to VncSharp, an open source VNC component
-  VNC is supported again except for the following features:
-    Windows authentication
-    Setting the compression, encoding and color settings
-    Connecting through a proxy server
-    Free SmartSize mode (it does the same thing as Aspect SmartSize mode now)
-  Rearranged the Options page and added an Updates tab
-  Added option to change how often updates are checked
-  Open Updates options tab before connecting for the first time
-  No longer show About page on first run
-  Renamed Quicky toolbar to Quick Connect toolbar
-  Changed back to allowing toolbars to dock to the left or right of the menu bar and added gripper to move it around
-  Added RDP, VNC and ICA version numbers to Components Check page
-  Fixed a bug with the inheritance buttons on the Config panel disappearing after awhile
-
-
-
-1.61 (2010-01-14):
-  Removed unlicensed SmartCode Solutions ViewerX VNC Viewer ActiveX
-  This version of mRemoteNG does not support VNC
-
-
-
-1.60 (2010-01-09):
-  Changed name to mRemoteNG
-  Fixed menu bar not staying docked to left side
-  Removed snakes game Easter egg
-  Removed references to visionapp Remote Desktop
-  Changed filename delimiter in title bar from pipe to dash
-  Changed default format for saving screenshot images to PNG
-  Changed website addresses
-  Added Report a Bug and Support Forum links to the Help menu
-  Moved Check for Updates to the Help menu
-  Changed website links in Help menu and About page to load within mRemoteNG instead of launching an external browser
-
------
-
-1.50:
-  Added the following formats to the "Save Connections As" function:
-    mRemote CSV (standard CSV file with all properties)
-    vRD 2008 CSV (standard CSV file with properties relevant for importing connections in vRD 2008)
-  Fixed bug in inheritance code (SmartSize Mode and View Only properies were always shown when using VNC)
-
-1.49:
-  mRemote and visionapp Remote Desktop 2008 merge!
-    Read more here: http://www.mremote.org/wiki/visionappMerge.ashx
-    or in the Announcement panel.
-  Added features to the update function
-  Added Announcement feature
-  Changed copyright notice in about screen and text when connecting via VNC
-  Fixed some SQL-related problems
-
-V1.48:
-  ATTENTION! There is a bug in the automatic update code in 1.45 so you will have to download the new version manually from http://www.mremote.org/wiki/Downloads.ashx
-  
-  Added startup components check with directions to fix component installation (also available in Tools - Components Check)
-  Added "Try to integrate" option to Ext. Apps. If enabled mRemote will try to integrate the app into a tab container like any other connection protocol.
-  Added Ext. App as protocol. Any Ext. App can be launched just like a normal connection.
-    Example (DameWare Mini Remote Control):
-    Create a new Ext. App with the following properties:
-      Display Name: DameWare
-      Filename: c:\PathToYourDameWareInstallDir\DWRCC.exe
-      Arguments: -c: -h: -m:%hostname% -u:%username% -p:"%password%" -d:%domain%
-      Options: Try to integrate
-    Create a new connection and select Ext. App as protocol
-    Then choose DameWare in the Ext. App field
-    If you have problems with a particular app that takes a long time to start up consider setting a higher PuTTY/Ext. Apps wait time in Tools - Options - Advanced
-  Added option to completely encrypt connection files (tools - options - advancecd)
-  Added Rendering Engine option for HTTP/S protocols
-    You can now use the Gecko (Firefox) rendering engine
-    For this to work you need to download xulrunner (get it here: ftp://ftp.mozilla.org/pub/xulrunner/releases/1.8.1.3/contrib/win32/)
-    It must be the 1.8.1.3 release, 1.9.0.0 does NOT work!
-    Extract the contents to a path of your choice and set the correct path in Tools - Options - Advanced - XULrunner path
-    The interface is tab enabled and usage is generally very firefox-like. So you can open new tabs with Ctrl+T, jump to the location bar with Ctrl+L and so on...
-  Added "MAC Address", "User Field" fields and %MacAddress%, %UserField% variables to use in Ext. Apps
-  Added descriptions for all fields in the config editor
-  Fixed bug in connections loading code when using SQL storage
-  Fixed bug in reconnect code
-  Fixed VNC sessions not refreshing screen automatically when switching between tabs or panels
-
-  WARNING! There have been changes to the connections file/SQL tables
-    Please always backup your whole config before updating to a new mRemote beta release, especially when there have been changes to the config files/SQL tables
-    To get SQL working with the new version please update your tables like in the provided script (Info - Help - SQL Configuration)
-    These are the added lines:
-      [RenderingEngine] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
-      [MacAddress] [varchar] (32) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
-      [UserField] [varchar] (256) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
-      [ExtApp] [varchar] (256) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
-      [InheritRenderingEngine] [bit] NOT NULL ,
-      [InheritMacAddress] [bit] NOT NULL ,
-      [InheritUserField] [bit] NOT NULL ,
-      [InheritExtApp] [bit] NOT NULL ,
-
-V1.45:
-  New german language build available
-  Added support for RDP 6.1 (XP SP3/Vista SP1) features (Server Authentication, Console Session, TS Gateway not yet...)
-  Added basic support for UltraVNC SingleClick (Tools - UltraVNC SingleClick); the listening port is configurable in the options
-  Fixed VNC connections not working on x64
-  Fixed screenshots save all feature overwriting files with the same name (not actually a bug, but rather a new feature ;)
-  Fixed ICA Encryption Strength not inheriting properly
-  
-  WARNING! There have been changes to the connections file/SQL tables
-    Please always backup your whole config before updating to a new mRemote beta release, especially when there have been changes to the config files/SQL tables
-    To get SQL working with the new version please update your tables like in the provided script (Info - Help - SQL Configuration)
-    These are the added lines:
-      [RDPAuthenticationLevel] [varchar] (32) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
-      [InheritRDPAuthenticationLevel] [bit] NOT NULL ,
-
-V1.43:
-  Added function to send either the main form or a connection panel to another screen
-    To send the form to another screen, right click the titlebar or the taskbar button and select "Send to..."
-    If you want to send a panel to another screen, right click the panel's tab and do the same
-  Fixed PuTTY connections not supporting credentials with spaces
-  Fixed form not opening on last position when using multiple screens
-  Fixed kiosk mode not working on secondary screen
-
-V1.42:
-  IMPORTANT NEWS: Please read the page that opens when you first start this release or go to:
-    http://www.mRemote.org/wiki/MainPage.ashx#Commercial
-  Added minimize to tray option
-  Added option to enable switching to open connections with a single click on the corresponding connection in the tree
-  Added button to test proxy settings
-  Fixed: If the active connection tab is a PuTTY connection, Alt+Tab to mRemote now focuses the PuTTY window
-  Fixed encoding problem with PuTTY sessions that included spaces
-  Fixed problem that made mRemote inaccesible when closing it on a second monitor and then disabling this monitor
-  Fixed: Inheritance defaults of some new VNC properties were not saved in the portable package
-
-V1.41:
-  Added complete support for SmartCode's ViewerX and removed VncSharp
-    Many thx to everyone who donated to make this happen!!! I didn't think that it wouldn't even take a week! =)
-    I hope everyone will be satisfied by the functions and possibilities this new control provides
-    If you use one of the non-setup packages you must register the control yourself
-      Open a cmd and change to the directory you installed mRemote to
-      Type regsvr32 scvncctrl.dll and click ok
-  Changed shortcuts and added buttons for them to the view menu under "Jump To" because they were causing several problems
-
-  WARNING! There have been changes to the connections file/SQL tables and the Ext. Apps XML file
-    Please always backup your whole config before updating to a new mRemote beta release, especially when there have been changes to the config files/SQL tables
-    To get SQL working with the new version please update your tables like in the provided script (Info - Help - SQL Configuration)
-
-V1.40:
-  Added (limited) support for the trial version of SmartCode's VNC ActiveX
-    To enable it go to Options - Advanced and check "Try SmartCode VNC ActiveX"
-    When connecting a pop up will open, wait about 10 seconds, then click on "Trial" to continue
-    I will integrate this control fully into mRemote if I get enough Donations to buy the single developer license ($375,-)
-    So if you want to see better VNC support (All UltraVNC, TightVNC and RealVNC functions) in mRemote, please help me and donate some bucks
-    For donations either go to the mRemote Wiki (Info - Website) or click on Info - Donate to directly go to PayPal
-    I will announce the current donation amount every day (or as often as I can) on the Wiki main page
-    If you want to know more about the control go here: http://www.s-code.com/products/viewerx/
-  Added feature to choose the panel a connection will open in when...
-    a. no panel name was assigned in the properties
-    b. you opened a connection with the option to choose the panel before connecting
-    c. you checked "Always show panel selection dialog when opening connectins" in Options - Tabs & Panels
-  Added Shortcuts to focus the standard panels
-    Alt+C: Switch between Connections & Config panel
-    Alt+S: Switch between Sessions & Screenshots panel
-    Alt+E: Switch to Errors & Infos panel
-  Added some new icons
-
-V1.39:
-  Added MagicLibrary.dll to the release again (forgot it in the 1.38 packages, sorry)
-  Added auto-reconnect for ICA
-  Added feature that automatically clears whitespaces in the Quicky Textfield
-  Added special feature: Go to the set password dialog and type "ijustwannaplay" (without the quotes) in the password field... ;)
-
-V1.38:
-  Added automatic reconnect feature for RDP (Options - Advanced)
-  Added connections drop-down to the quicky toolbar (same as the tray icon menu)
-  Added setting in the options to enable/disable that double clicking on a connection tab closes it
-  Added option to automatically set the hostname like the display name when creating new connections
-  Fixed bug that caused the properties of a folder to be filled with "Object reference not set to an instance of an object." when adding a folder to the root with Default Inheritance enabled
-  Fixed bug that made the properties of a newly added Connection to the root unavailable when Default Inheritance was enabled
-  Fixed bug that the default settings for Pre/Post Ext. App, and their inheritance settings were not being saved
-  Fixed bug in settings loading methods that caused the application to hang when an error occured
-  Fixed bug in Ext. Apps panel that copied the properties of the previously selected Ext. App when "Wait for exit" was checked
-  Fixed bug in the SQL Query that creates the tables needed by mRemote
-  Attempt to fix the "Drop-Down on Screenshot" bug on some machines
-
-V1.35:
-  Added single instance mode (look in Options - Startup/Exit) - No cmd arguments supported yet!
-  Added possibilty to start a Ext. App before connecting and on disconnect (e.g. for VPN/RAS)
-  Added option to the Ext. Apps to tell mRemote to wait for the exit of the Ext. App
-  Added encryption setting for ICA
-  
-  WARNING! There have been changes to the connections file/SQL tables and the Ext. Apps XML file
-    Please always backup your whole config before updating to a new mRemote beta release, especially when there have been changes to the config files/SQL tables
-    Here's a list of new columns that need to be created before saving connections to an SQL server:
-      Name: ICAEncryptionStrength, Data-Type: varchar, Length: 64, Allow Nulls: No
-      Name: InheritICAEncryptionStrength, Data-Type: bit, Length: 1, Allow Nulls: No
-      Name: PreExtApp, Date-Type: varchar, Length: 512, Allow Nulls: Yes
-      Name: PostExtApp, Date-Type: varchar, Length: 512, Allow Nulls: Yes
-      Name: InheritPreExtApp, Date-Type: bit, Length: 1, Allow Nulls: No
-      Name: InheritPostExtApp, Date-Type: bit, Length: 1, Allow Nulls: No
-
-V1.33:
-  Fixed problem that caused RDP connections not to initialize properly when using XP SP3
-  Fixed bug in Port Scan that prevented hosts with no hostname from being imported
-
-V1.32:
-  Added: Inheritance defaults can now be customized (look in the root properties of your connections tree)
-  Fixed bug that made password-secured connection files not load properly because the return value from the password screen was always null
-  Fixed a lot of outdated code in the import functions (Import from XML, Import from AD, Import from RDP files)
-  Fixed bug that caused properties with a ' character not to be saved properly when using SQL Server
-  Changed Target CPU to AnyCPU again as I think the x86 setting caused problems on x64 machines (although it shouldn't)
-
-V1.31:
-  Small speed improvement to the port scanner
-  Fixed bug that caused SQL live-update to not work when not using AD Authentication
-  Fixed bug that caused Save As not to work
-
-V1.30:
-  Added experimental SQL Server with live-update (multi-user) support (see Help - Getting started - SQL Configuration)
-  Added bunch of new icons to the UI, most of them by famfamfam.com
-  Added dropdown button to Quicky Toolbar to choose protocol
-  Many smaller changes and additions
-  Fixed: Wrong default PuTTY session name
-  Fixed bug in Port Scanner that caused an error when no DNS name could be resolved
-
-V1.25:
-  Added inheritance for folders
-  Added port scan feature and possibility to import from a scan
-  Added toolbar for Ext. Apps (see View - External Applications Toolbar)
-  Added quick connect as toolbar
-  Added code that creates a backup of the current connections file every time it is loaded (It's named YourConsFile.xml_BAK)
-  Added description variable to Ext. Apps
-  Fixed bug that allowed inheriting from root node
-  Fixed bug that caused Ext. Apps launched from a connection tab to use the selected tree node instead of the current tab
-  Fixed bug that caused mRemote not to save panel layout and Ext. Apps on exit
-
-V1.24:
-  Fixed a bug in connections loading mechanism that caused a corrupted connections file when upgrading from a previous version
-
-V1.23:
-  Added feature to remember which connections were opened on last runtime and reconnect to them on the next start (see Tools - Options - Startup/Exit)
-    A command line switch is also available to cancel reconnecting (/noreconnect or /norc)
-  Added Auto Save feature (Tools - Options - Connections - Auto Save every...)
-  Added Ext. Apps to connection tab context menu
-  Added better error handling for RDP connection creation
-  Fixed problem with Sessions feature on 64bit systems
-  Fixed Sessions feature not working when using global credentials
-  Fixed several problems with the Active Directory OU picker control
-  Fixed bug in Connection duplicate code that caused duplicated connection to still have previous tree node assigned
-
-V1.20:
-  Added External Applications feature (check the help section for more info)
-  Added duplicate feature to Connections tree
-  Fixed: MagicLibrary.dll was not included in the setup package
-
-V1.16:
-  New Domain: www.mRemote.org
-  Fixed PuTTY connections appearing in a new window
-    There's a new setting in the options to fine tune the time to wait until the window has been created
-  Fixed export not working
-  Added reconnect feature in tab menu
-
-V1.15:
-  Added: New portable package
-  Added: Defaults for new connections can now be customized
-    Click the root item and then the new Properties-like button with a small yellow star to get to the settings
-  Fixed Import from Active Directory not working
-  Fixed problem with single click connect not focusing correctly
-  Fixed root node not being renamed after changing name in property grid
-
-V1.10:
-  Added support for setting a password to protect the connections file with (look in the root of your connections tree)
-  Added RDP file import feature
-  Added new command-line switch to reset panel's positions
-  Added HTTPS as protocol
-  Added HTTP/S basic authentication
-  Added support for setting a Proxy server for automatic updates
-  Some changes in help section
-  Fixed the bug that passwords stored in the options weren't decrypted when a connection was opened
-  Fixed "bug" that prevented "Connect to console session" from working in RDC6.1 (Vista SP1 RC1/XP SP3 RC1)
-
-V1.00:
-  Merry Christmas! =)
-  
-  V1.00 is a (almost) complete rewrite of the whole application
-  The code base is now much cleaner and more (easily) extendable
-  New features include (but are not limited to):
-    Every part of the application is now integrated into panels which can be moved, docked and undocked, hidden, moved to another monitor, etc.
-      This makes many new and exciting ways to manage connection and application windows possible
-      You can for example open up 4 PuTTY sessions in 4 different panels and align them in the main application so you can use all 4 side by side - 2 on the upper side and 2 on the bottom for example
-      This can be done for EVERY part of the application, it's completely modular and customizable
-    Connection and folder (previously called containers) properties have moved to a new property grid control
-    Every setting (with the exclusion of the hostname, which wouldn't make any sense) can now be inherited from the parent folder
-    Connection file saving/loading is now handled a bit different (more in the help section)
-    Application restart is no longer nececary after changing options, they are active with a click of the OK button
-    Smart size can now be activated also if a connection is already open (in the right click menu of the active tab)
-    A panel name can be stored with every connection (or folder, if inherting) to always open the connection in the specified panel
-  And last but not least, many bugs have been fixed, though there are probably many new bugs aswell - Did I already mention this is a rewrite? ;)
-  I hope you like my work and if you do please consider donating on the mRemote website to support me a little. Any amount will do! Thx!
-
-V0.50:
-  Removed old Terminal (SSH, Telnet) control and embedded PuTTY instead
-    This decision brings mostly good but also some bad news
-    The good news is that now everything that works in putty also works in mRemote
-      This means X11 forwarding, SSH port forwarding, session logging, appearance customization, etc. should be working fine now
-      It also brings some new protocols (Rlogin, RAW)
-    The bad news is that I cannot fully integrate Putty into mRemote because it is a standalone application and thus has it's own window handle
-      This means that you won't be able to use Ctrl+Tab to switch between tabs, catching errors or infos through the new Errors and Infos tab isn't possible, etc.
-  Added possibility to change resolution or display mode (Fit to window, Fullscreen, Smart size)
-  Added new setting in options to show logon info on tab titles
-  Added new feature that catches popup dialogs and puts them in a managed interface. This is another step to make mRemote a single window application.
-    Pressing escape switches back to the connection list
-    There is a context menu that allows you to copy selected errors/warnings/infos to the clipboard (text only) or to delete them
-    There also are settings in the option to change when to switch to the tab and to switch back to the normal behaviour of displaying message popups
-  Added QuickConnect history and auto-complete functions
-  Added a few new Icons (Linux, Windows, ESX, Log, Finance)
-  Improved options tab
-  Connections file version is now 1.2
-  Fixed some form drawing bugs
-
-V0.35:
-  Added tab switching/closing hotkeys
-    Switch to next tab: Ctrl+Tab
-    Switch to previous tab: Ctrl+Shift+Tab
-    Close active tab: Ctrl+W
-    This does not and will probably never work with RDP connections!
-  Fixed bug in updating code that still displayed the current version in the old format (x.x.x.x instead of x.xx)
-  Fixed bug where the colors setting was not correctly read after saving and reloading a connections file (only with 256 colors setting)
-  Fixed bug that made connect to console session and fullscreen options not work
-  Fixed bug that when opening options, update or about tab caused weird paddings next to the tab or other strange behaviour
-  Changed shortcuts to menu items in main menu as they interfered with some terminal key bindings
-
-V0.30:
-  Added HTTP as protocol to allow for basic web-based administration
-  Added new connections menu to the toolbar
-    Left click on a connection connects
-    Right click on a container or connection opens the config tab for the selected item
-  Added two new connection context menu entries for quickly connecting to console session or connecting in fullscreen
-  Improved tray icon menu (just like the main connections menu)
-  The connections tree can now be hidden
-    To hide it right click on the splitter (the divider between the connections tree and the tabbing interface)
-  Removed overlay (RDP locking) feature in favor of simply grabbing input when clicking inside the control area
-    I hope nobody is too sad that the nice looking overlay feature had to go, but..., well, it had to! ;-)
-  Changed "Redirect Key combinations (like in fullscreen)" to be disabled when in kiosk mode as it has no effect then anyway
-  Several small bugfixes and code improvements
-
-V0.20:
-  Added Drag and Drop support for tabs
-  Added tab context menu
-    Switch to/from fullscreen
-    Take a screenshot
-    Transfer files via SCP/SFTP (SSH)
-    Send special keys (VNC)
-    Rename tabs
-    Duplicate tabs (Create another instance of the connection)
-    Show config
-    Close tab (disconnect)
-  Removed Fullscreen and Send special keys buttons from the main toolbar as they are now in the tab context menu
-  Added middle click support for tabs (close/disconnect)
-  Added SSH file transfer (SCP/SFTP) support
-  Added Tools menu to the tree context menu
-    Transfer files via SCP/SFTP (SSH)
-    Import/Export features
-    Sorting
-  Changed version format
-  Fixed the problem that caused mRemote to crash when dragging a parent node of the connections tree onto one of it's child nodes
-  Fixed problem in importing mechanism that allowed importing connections including the root which resulted in multiple root items that couldn't be deleted
-  Fixed problem with quick connect
-
-V0.0.9.0:
-  Added support for redirecting key combinations (Alt+Tab, Winkey, ...)
-  Added Import/Export features
-  Added Quick Connect Port support, just type the host you want to connect to followed by a ":" and then the port
-  Added Connect/Disconnect buttons to connections context menu
-  Added two new icons (Test Server | TST; Build Server | BS)
-  Many changes to the connections loading/saving mechanisms
-  confCons version is now 1.0
-  Some code cleanup
-  Fixed auto session info to only try to get session information when a RDP connection is selected
-  Fixed AD Import feature (didn't care if imported items were computers, groups, users, ... ;)
-  Fixed settings and connections not saving when installing updates from the auto-updater
-  Fixed form size and location not saving properly when closing the application in minimized state or in maximized state on a secondary monitor
-
-V0.0.8.2:
-  Added SSH1 to Quick Connect GUI
-  Changed buffer size of terminal control, it's now 500 lines
-  Fixed terminal connections not getting focus when changing tabs
-  Fixed bug in terminal code that caused hitting "home" to show "~" instead of jumping to the start of the line
-  Fixed bug that caused that hitting enter in mRemote wouldn't do anything when options was opened before
-
-V0.0.8.0:
-  Added code to check if the msrdp com control is registered
-  Many Improvements to the terminal control (ssh1(!), ssh2, telnet)
-  Fixed bug that caused mRemote to crash when moving connection into root node (only with inheritance enabled)
-  Fixed bug: Pressing delete when editing a node's name caused delete messagebox to show
-
-V0.0.7.5:
-  Added inheritance feature to inherit connection settings from parent container
-  Expanded/Collapsed state of tree nodes will now be saved
-  Reduced auto session info delay to 700ms
-  Some code maintainance
-  Some corrections to connections tree and quick search behaviour
-  Fixed bug in TerminalControl that caused the error message "error loading string"
-  Fixed: Settings saving on exit was broken in V0.0.7.0, this is fixed now
-  Changed connections file version to 0.9
-  Fixed connections context menu bug that made import from ad option inaccessible
-  Fixed session info filling up with infos about hosts previously selected
-
-V0.0.7.0:
-  Massive GUI redesign and changes, hope you like it! =)
-  Fixed bug that made session info to query immediately after selecting a connection (when enabled), there is now a one second delay to prevent collecting session info for more than one host
-  
-V0.0.6.8:
-  Added connection import feature for Active Directory
-  Tidied up project references
-  Multiple changes to setup routine
-  Improved error handling for auto-update
-  Improved download handling for auto-update
-  Fixed bug that made download finished/failed message box appear multiple times when update was canceled and re-downloaded
-  Fixed bug where double-clicking a container opened all connections inside this container
-
-V0.0.6.6:
-  Changed port textbox control to only allow digits
-  Small changes to connection code for SSH
-  Fixed port setting not saving (or always displaying default port for selected protocol)
-
-V0.0.6.5:
-  Added auto update feature
-  Changed: Multiple UI Changes (added shortcuts, rearranged menu items, ...)
-  Fixed the problem where the connections file version was saved either with a dot or a comma, depending on system language
-  Fixed not being able to connect to SSH2 hosts without specifying username and password
-  Fixed several problems with Quick Connect
-  Improved saving of config changes
-  Fixed connections tab not closing when using SSH
-
-V0.0.6.0:
-  Added new protocols: SSH2 and Telnet
-  Added first command line switch/parameter "/consfile"
-    Ex.: mRemote.exe /consfile "%PathToYourConnectionsFile%"
-  Added button to screenshots to delete a screenshot
-  Added Host Status (Ping) feature
-  Many code rewrites and changes in almost every area
-  Changed the way connections get loaded
-    The default path for the connection file is no longer in the application directory but in the local application data folder. 
-    Ex.: c:\Documents and Settings\felix\Local Settings\Application Data\Felix_Deimel\mRemote\
-    If opening a connection file from a custom location (click on open link) saving will also occur in this file and not like in previous versions to the default connections file
-    To import your old connection file please use the following procedure: start mRemote, click on "Open" and find your old connection file. Then click on "Save As" and save it with the default file name to the default location
-  Changed the font and style of context menus
-  Changed Quick Connect UI
-  Fixed connection settings in config tab not saving when clicking another connection before jumping to another config field
-  Fixed a bug where renaming a container caused the first connection in the same container to be renamed too
-
-V0.0.5.0 R2:
-  Fixed a bug that prevented connections from opening when icon files were assigned in a previous version of mRemote
-
-V0.0.5.0:
-  Added (Global) fullscreen / kiosk feature
-  Added redirection settings for disk drives, printers, ports, smart cards and sound
-  Added option to write a log file
-  Added option to open new tabs on the right side of the currently selected tab
-  Added possibility to connect to all nodes in a container
-  Changed session functions to work in background
-  Changed icon choosing mechanism and added a bunch of default icons
-  Changed: Containers with connection can now be deleted just like empty containers
-  Changed screenshot functions to now collect all screenshots in one tab
-  Changed: More settings can now be changed on container basis
-  Changed config file version to 0.6
-  Changed: Small internal changes to the connection saving/creating and opening mechanisms
-  Fixed "Display Wallpapers" and "Display Themes" settings, they are working now
-
-V0.0.3.6:
-  Added Feature to display an overlay when RDP connection tab has lost the focus, clicking on this gives the focus back to the control
-  Added standard handlers for F2 (rename) and DEL (delete) keys in the treeview
-  Added icon preview for connections in config tab
-  Changed the way new connections and containers are being created in the treeview. The pop up window will not be displayed any longer, instead everything is handled inplace by the treeview.
-  Changed some minor UI related stuff
-  Fixed bug in tab closing mechanism that caused icons (play/pause) to not be set on the correct tree nodes
-
-V0.0.3.5:
-  Added Feature to query and log off sessions on a remote machine and option to do this automatically
-  Added Option to show icon in system tray with connection menu
-  Changed controls to flat style as I think this fits the whole application more than the old 3D look
-  Multiple UI changes to eliminate annoying behaviour
-
-V0.0.3.3:
-  Added Feature to specify which login information to use when no info is provided in the config of a remote machine
-  Fixed bug in Quick Find where trying to open a connection when no node was found caused an error
-  Fixed bug where the main form was not rendered correctly when hiding top bar and using XP Themes
-  Fixed bug in drag-drop routine that caused application to hang when trying to drop a node on one of it's child nodes
-  Fixed bug where taskbar buttons for fullscreen rdp windows did not disappear after disconnecting
-  
-V0.0.3.2:
-  Added new Save As Dialog with feature to only save specific connection settings
-  Added Option to display Tooltips when hovering over host entries in the connection tree
-  Added Option to ask at exit when there are open connections
-  Fixed bug where saving connections file with spaces in the root node caused an error -> updated Connection File Version to 0.5
-  Fixed bug in options tab where the browse button for a custom connection file didn't do anything
-
-V0.0.3.0:
-  Added Options Tab
-    Load connections file from different location
-    Save/Don't Save connections file on exit
-    Show current tab name in window title
-  Added drag and drop functionality to the connections tree
-  Added feature to hide top bar
-  Added feature to send special keys (VNC)
-  Updated VncSharp Library to V0.88 (still pretty buggy)
-
-V0.0.2.7:
-  Added feature to save connection settings to all connections in the selected container
-  Icon choosing bug fixed
-  Taskbar button had no text when in fullscreen - fixed
-  Fixed bug in Quick Connect GUI
-  Disabled "Display Wallpaper" and "Display Themes" checkboxes as these features are not implemented
-
-V0.0.2.5:
-  Quick connect button bug fixed
-  Search field resize bug fixed
-  Splitter position is now saved on exit
-  Added new connections toolstrip (same functions as context menu)
-
-V0.0.2.4:
-  Changed default color depth to 16bit
-  Added Keep Alive Interval (1 Minute)
-  Added Options to choose between RDP & VNC
-  Added Port Setting for RDP
-  Added Option to connect to console
-  Added Menu Entries to move Connections & Containers up & down
-  Some small code improvements

CREDITS.TXT

@@ -1,121 +0,0 @@
-Contributors
-============
-
-Current mRemoteNG dev team:
-David Sparer (github.com/sparerd)
-Hayato Iriumi (github.com/hiriumi)
-Sean Kaim (github.com/kmscode)
-
-Felix Deimel - mRemote original developer
-Riley McArdle - mRemoteNG original developer
-
-github.com/Brandhor
-
-
-Past Contributors
-=================
-Jason Barbier
-Wiktor Beryt
-Lionel Caignec
-Ruben d'Arco
-Holger Henke
-Tom Hiller
-Apisitt Rattana
-Andreas Rehm
-David Vidmar
-
-
-Translators
-===========
-
-Eugenio "Ryo567" Mart<72>nez
-Mathieu Pape
-Emanuel Silva
-Robert Siwiec
-Hayato Iriumi
-Sebastien Thieury (github.com/SebThieu)
-
-
-Included Source Code
-====================
-
-Command Line Arguments Parser 1.0
-Copyright <20> 2002 Richard Lopes
-MIT License
-http://www.codeproject.com/KB/recipes/command_line.aspx
-
-FilteredPropertyGrid
-Copyright <20> 2006 Azuria
-http://www.codeproject.com/KB/cs/FilteredPropertyGrid.aspx
-
-Hotkey Selection Control for .NET
-Copyright <20> 2006 Thomas Backman
-http://www.codeproject.com/Articles/15085/A-simple-hotkey-selection-control-for-NET
-
-InputBox
-Copyright <20> 2016 Jan Slama
-http://www.csharp-examples.net/inputbox/
-
-IP TextBox
-Copyright <20> 2005 mawnkay
-http://www.codeproject.com/Articles/11576/IP-TextBox
-
-
-Included Components
-===================
-
-ADTree 1.0
-Copyright <20> 2004 Marc Merritt
-Copyright <20> 2008 Felix Deimel
-http://www.codeproject.com/KB/selection/ADPickerCtrl.aspx
-
-DiffieHellman 1.0
-Copyright <20> 2003 The Mentalis.org Team
-Modified New BSD License
-http://www.mentalis.org/
-
-DockPanel Suite 2.10.0.beta2
-Copyright <20> 2015 @roken and @lextm (formerly Weifen Luo)
-MIT License
-https://github.com/dockpanelsuite/dockpanelsuite
-
-GeckoFX 45
-Copyright <20> 2016 Tom Hindle
-Mozilla Public License
-https://bitbucket.org/geckofx/
-
-log4net 1.2.15.0
-Copyright <20> 2001-2015 The Apache Software Foundation
-Apache License Version 2.0
-http://logging.apache.org/log4net/
-
-Magic Library 1.7.4
-Copyright <20> 2002-2003 Crownwood Consulting, Ltd.
-Freely redistributable with attribution
-http://www.dotnetmagic.com/magic_download.html
-
-Mentalis.org Security Library 1.0.13.715
-Copyright <20> 2002-2005 The Mentalis.org Team
-Modified New BSD License
-http://www.mentalis.org/
-
-PuTTY 0.67
-Copyright <20> 1997-2016 Simon Tatham
-MIT License
-http://www.chiark.greenend.org.uk/~sgtatham/putty/
-
-SharpSSH 1.1.1.13
-Copyright <20> 2002-2008 Atsuhiko Yamanaka, JCraft, Inc.
-Copyright <20> 2007 Tamir Gal
-BSD Style License
-http://www.tamirgal.com/blog/page/SharpSSH.aspx
-
-Silk Icon Set
-Copyright <20> 2005-2008 FAMFAMFAM
-Creative Commons Attribution 2.5 License
-http://www.famfamfam.com/
-
-VncSharp 1.1
-Copyright <20> 2004-2009 David Humphrey
-GNU General Public License (GPL) Version 2
-https://github.com/humphd/VncSharp

CREDITS.md

@@ -0,0 +1,142 @@
+# Contributors
+## Current mRemoteNG dev team
+David Sparer (github.com/sparerd)  
+Sean Kaim (github.com/kmscode)  
+Faryan Rezagholi (github.com/farosch)  
+
+Thanks for the awesome new website!  
+Bennett Blodinger (github.com/benwa)
+
+Joe Cefoli (github.com/jcefoli)  
+countchappy (github.com/countchappy)  
+Tony Lambert  
+Julien Roncaglia (github.com/vbfox)  
+github.com/peterchenadded  
+Brandon Wulf (github.com/mrwulf)  
+Pedro Rodrigues (github.com/pedro2555)  
+github.com/dekelMP  
+Bruce (github.com/brucetp)  
+Camilo Alvarez (github.com/jotatsu)  
+github.com/DamianBis  
+github.com/pfjason  
+github.com/sirLoaf  
+github.com/Fyers  
+Vladimir Semenov (github.com/sli-pro)  
+Stephan (github.com/st-schuler)  
+Aleksey Reytsman (github.com/areytsman)  
+Cristian Abelleira (github.com/CrAbelleira)  
+github.com/MitchellBot  
+
+## Past Contributors
+Felix Deimel - mRemote original developer  
+Riley McArdle - mRemoteNG original developer  
+
+Hayato Iriumi (github.com/hiriumi)  
+Jason Barbier  
+Wiktor Beryt  
+Lionel Caignec  
+Ruben d'Arco  
+Holger Henke  
+Tom Hiller  
+Apisitt Rattana  
+Andreas Rehm  
+David Vidmar  
+github.com/Brandhor  
+Dimitrij (github.com/Kvarkas)  
+
+## Translators
+Eugenio "Ryo567" Martínez  
+Mathieu Pape  
+Emanuel Silva  
+Robert Siwiec  
+Hayato Iriumi  
+Sebastien Thieury (github.com/SebThieu)  
+Riza Emet  
+Lukas Plachy (github.com/rheingold)  
+Gyuha Shin  
+Stefan (github.com/polluks)  
+github.com/emazv72  
+Vladimir Semenov (github.com/sli-pro)  
+Marco Sousa (github.com/marcomsousa)  
+github.com/wwj402  
+github.com/Fyers  
+github.com/pablomh  
+
+## Included Source Code
+Command Line Arguments Parser  
+Copyright © 2002 Richard Lopes  
+MIT License  
+http://www.codeproject.com/KB/recipes/command_line.aspx
+
+FilteredPropertyGrid  
+Copyright © 2006 Azuria  
+http://www.codeproject.com/KB/cs/FilteredPropertyGrid.aspx
+
+InputBox  
+Copyright © 2016 Jan Slama  
+http://www.csharp-examples.net/inputbox/
+
+IP TextBox  
+Copyright © 2005 mawnkay  
+http://www.codeproject.com/Articles/11576/IP-TextBox
+
+PortableSettingsProvider   	
+Copyright © 2014 crdx  
+https://github.com/crdx/PortableSettingsProvider
+
+
+## Included Components
+ADTree  
+Copyright © 2004 Marc Merritt  
+Copyright © 2008 Felix Deimel  
+http://www.codeproject.com/KB/selection/ADPickerCtrl.aspx
+
+DockPanel Suite  
+Copyright © 2018 @roken and @lextm (formerly Weifen Luo)  
+MIT License  
+https://github.com/dockpanelsuite/dockpanelsuite
+
+GeckoFX   
+Copyright © 2016 Tom Hindle  
+Mozilla Public License  
+https://bitbucket.org/geckofx/
+
+log4net  
+Copyright © 2001-2015 The Apache Software Foundation  
+Apache License Version 2.0  
+http://logging.apache.org/log4net/
+
+Magic Library  
+Copyright © 2002-2003 Crownwood Consulting, Ltd.  
+Freely redistributable with attribution  
+http://www.dotnetmagic.com/magic_download.html
+
+PuTTY  
+Copyright © 1997-2017 Simon Tatham  
+MIT License  
+http://www.chiark.greenend.org.uk/~sgtatham/putty/
+
+Silk Icon Set  
+Copyright © 2005-2008 FAMFAMFAM  
+Creative Commons Attribution 2.5 License  
+http://www.famfamfam.com/
+
+SSH.NET  
+Copyright © 2016  
+MIT License  
+https://github.com/sshnet/SSH.NET
+
+VncSharp  
+Copyright © 2004-2009 David Humphrey  
+GNU General Public License (GPL) Version 2  
+https://github.com/humphd/VncSharp
+
+ObjectListView  
+Copyright © 2006-2016 Phillip Piper  
+GNU General Public License (GPL) Version 3  
+https://sourceforge.net/projects/objectlistview/
+
+Markdig  
+Copyright © 2016-2019 Alexandre Mutel  
+BSD 2-Clause "Simplified"  
+https://github.com/lunet-io/markdig

InstallerProjects/CustomActions/CustomActions.cs

@@ -5,26 +5,22 @@ namespace CustomActions
     public class CustomActions
     {
         [CustomAction]
-        public static ActionResult IsKBInstalled(Session session)
+        public static ActionResult IsMinimumRdpVersionInstalled(Session session)
         {
-            session.Log("Begin IsKBInstalled");
-            string kb = session["KB"];
-            session.Log("Checking if '{0}' is installed", kb);
-            InstalledWindowsUpdateGatherer updateGatherer = new InstalledWindowsUpdateGatherer();
-            bool isUpdateInstalled = updateGatherer.IsUpdateInstalled(kb);
-            session.Log("KB is installed = '{0}'", isUpdateInstalled);
-            if (isUpdateInstalled)
-            {
-                session[kb] = "1";
-                session.Log("Set property '{0}' to '1'", kb);
-            }
-            else
-            {
-                session[kb] = "0";
-                session.Log("Set property '{0}' to '0'", kb);
-            }
+            var acceptedRdpKbVariables = new[] { session["RDP80_KB"], session["RDP81_KB"] };
+            var returnVariable = "MINIMUM_RDP_VERSION_INSTALLED";
+            var kbInstalledChecker = new KbInstalledChecker(session);
+            kbInstalledChecker.Execute(acceptedRdpKbVariables, returnVariable);
+            return ActionResult.Success;
+        }
 
-            session.Log("End IsKBInstalled");
+        [CustomAction]
+        public static ActionResult IsRdpDtlsUpdateInstalled(Session session)
+        {
+            var kb = session["RDP_DTLS_KB"];
+            var returnVar = "RDP_DTLS_UPDATE_INSTALLED";
+            var kbInstalledChecker = new KbInstalledChecker(session);
+            kbInstalledChecker.Execute(kb, returnVar);
             return ActionResult.Success;
         }
 
@@ -32,8 +28,8 @@ namespace CustomActions
         public static ActionResult IsLegacyVersionInstalled(Session session)
         {
             session.Log("Begin IsLegacyVersionInstalled");
-            UninstallNSISVersions uninstaller = new UninstallNSISVersions();
-            if (uninstaller.IsLegacymRemoteNGInstalled())
+            var uninstaller = new UninstallNsisVersions();
+            if (uninstaller.IsLegacymRemoteNgInstalled())
             {
                 session["LEGACYVERSIONINSTALLED"] = "1";
             }
@@ -50,8 +46,8 @@ namespace CustomActions
         public static ActionResult UninstallLegacyVersion(Session session)
         {
             session.Log("Begin UninstallLegacyVersion");
-            UninstallNSISVersions uninstaller = new UninstallNSISVersions();
-            string uninstallString = uninstaller.GetLegacyUninstallString();
+            var uninstaller = new UninstallNsisVersions();
+            uninstaller.GetLegacyUninstallString();
             uninstaller.UninstallLegacyVersion(true);
             session.Log("End UninstallLegacyVersion");
             return ActionResult.Success;

InstallerProjects/CustomActions/CustomActions.csproj

@@ -45,9 +45,10 @@
   </ItemGroup>
   <ItemGroup>
     <Compile Include="CustomActions.cs" />
+    <Compile Include="KbInstalledChecker.cs" />
     <Compile Include="Properties\AssemblyInfo.cs" />
-    <Compile Include="InstalledWindowsUpdateGatherer.cs" />
-    <Compile Include="UninstallNSISVersions.cs" />
+    <Compile Include="InstalledWindowsUpdateChecker.cs" />
+    <Compile Include="UninstallNsisVersions.cs" />
     <Content Include="CustomAction.config" />
   </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />

InstallerProjects/CustomActions/InstalledWindowsUpdateChecker.cs

@@ -0,0 +1,72 @@
+using System;
+using System.Management;
+using System.Collections;
+using System.Collections.Generic;
+
+namespace CustomActions
+{
+    public class InstalledWindowsUpdateChecker
+    {
+        private readonly ManagementScope _managementScope;
+
+        public InstalledWindowsUpdateChecker()
+        {
+            _managementScope = Connect();
+        }
+
+
+        public ManagementScope Connect()
+        {
+            try
+            {
+                return new ManagementScope(@"root\cimv2");
+            }
+            catch (ManagementException e)
+            {
+                Console.WriteLine($"Failed to connect: {e.Message}");
+                throw;
+            }
+        }
+
+        public ArrayList GetInstalledUpdates()
+        {
+            const string query = "SELECT * FROM Win32_QuickFixEngineering";
+            var installedUpdates = new ArrayList();
+            var searcher = new ManagementObjectSearcher(_managementScope, new ObjectQuery(query));
+            foreach(var o in searcher.Get())
+            {
+                var queryObj = (ManagementObject) o;
+                installedUpdates.Add(queryObj["HotFixID"]);
+            }
+            return installedUpdates;
+        }
+
+        public bool IsUpdateInstalled(string kb) => IsUpdateInstalled(new[] {kb});
+
+        public bool IsUpdateInstalled(IEnumerable<string> kbList)
+        {
+            var updateIsInstalled = false;
+            var whereClause = BuildWhereClauseFromKbList(kbList);
+            if (whereClause == "") return false;
+            var query = $"SELECT HotFixID FROM Win32_QuickFixEngineering WHERE {whereClause}";
+            var searcher = new ManagementObjectSearcher(_managementScope, new ObjectQuery(query));
+            if (searcher.Get().Count > 0)
+                updateIsInstalled = true;
+            return updateIsInstalled;
+        }
+
+        private string BuildWhereClauseFromKbList(IEnumerable<string> kbList)
+        {
+            var whereClause = "";
+            var counter = 0;
+            foreach (var kb in kbList)
+            {
+                if (counter > 0)
+                    whereClause += " OR ";
+                whereClause += $"HotFixID='{kb}'";
+                counter++;
+            }
+            return whereClause;
+        }
+    }
+}

InstallerProjects/CustomActions/InstalledWindowsUpdateGatherer.cs

@@ -1,54 +0,0 @@
-using System;
-using System.Management;
-using System.Collections;
-
-namespace CustomActions
-{
-    public class InstalledWindowsUpdateGatherer
-    {
-        private ManagementScope _managementScope;
-        private ManagementClass _managementClass;
-
-        public InstalledWindowsUpdateGatherer()
-        {
-            _managementScope = Connect();
-            _managementClass = new ManagementClass("Win32_QuickFixEngineering");
-        }
-
-
-        public ManagementScope Connect()
-        {
-            try
-            {
-                return new ManagementScope(@"root\cimv2");
-            }
-            catch (ManagementException e)
-            {
-                Console.WriteLine("Failed to connect", e.Message);
-                throw;
-            }
-        }
-
-        public ArrayList GetInstalledUpdates()
-        {
-            string query = "SELECT * FROM Win32_QuickFixEngineering";
-            ArrayList installedUpdates = new ArrayList();
-            ManagementObjectSearcher searcher = new ManagementObjectSearcher(_managementScope, new ObjectQuery(query));
-            foreach(ManagementObject queryObj in searcher.Get())
-            {
-                installedUpdates.Add(queryObj["HotFixID"]);
-            }
-            return installedUpdates;
-        }
-
-        public bool IsUpdateInstalled(string KB)
-        {
-            bool updateIsInstalled = false;
-            string query = string.Format("SELECT HotFixID FROM Win32_QuickFixEngineering WHERE HotFixID='{0}'", KB);
-            ManagementObjectSearcher searcher = new ManagementObjectSearcher(_managementScope, new ObjectQuery(query));
-            if (searcher.Get().Count > 0)
-                updateIsInstalled = true;
-            return updateIsInstalled;
-        }
-    }
-}

InstallerProjects/CustomActions/KbInstalledChecker.cs

@@ -0,0 +1,44 @@
+using System;
+using System.Collections.Generic;
+using Microsoft.Deployment.WindowsInstaller;
+
+namespace CustomActions
+{
+    public class KbInstalledChecker
+    {
+        private readonly Session _session;
+        private readonly InstalledWindowsUpdateChecker _installedUpdateChecker;
+
+        public KbInstalledChecker(Session session)
+        {
+            _installedUpdateChecker = new InstalledWindowsUpdateChecker();
+            _session = session;
+        }
+
+        public bool Execute(string acceptedKb, string returnVar) => Execute(new[] {acceptedKb}, returnVar);
+
+        public bool Execute(IEnumerable<string> acceptedKbs, string returnVar)
+        {
+            try
+            {
+                _session.Log("Begin KbInstalledChecker");
+                var isUpdateInstalled = _installedUpdateChecker.IsUpdateInstalled(acceptedKbs);
+                SetReturnValue(isUpdateInstalled, returnVar);
+                _session.Log("End KbInstalledChecker");
+                return true;
+            }
+            catch (Exception e)
+            {
+                _session.Log($"There was an issue executing the KbInstalledChecker. Exception: {e}");
+                return false;
+            }
+        }
+
+        private void SetReturnValue(bool isUpdateInstalled, string returnVar)
+        {
+            var updateInstalledVal = isUpdateInstalled ? "1" : "0";
+            _session[returnVar] = updateInstalledVal;
+            _session.Log($"Set property '{returnVar}' to '{updateInstalledVal}'");
+        }
+    }
+}

InstallerProjects/CustomActions/UninstallNSISVersions.cs

@@ -1,58 +1,56 @@
 using System;
-using System.Collections.Generic;
-using System.Text;
 using Microsoft.Win32;
 using System.Diagnostics;
-using System.IO;
+
 
 namespace CustomActions
 {
-    public class UninstallNSISVersions
+    public class UninstallNsisVersions
     {
-        private const string REGISTRY_PATH = "Software\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\mRemoteNG";
-        private const string REGISTRY_PATH_Wow6432 = "Software\\Wow6432Node\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\mRemoteNG";
+        private const string RegistryPath = "Software\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\mRemoteNG";
+        private const string RegistryPathWow6432 = "Software\\Wow6432Node\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\mRemoteNG";
         private RegistryKey _activeRegistryPath;
 
 
-        public UninstallNSISVersions()
+        public UninstallNsisVersions()
         {
-            GetLegacymRemoteNGRegistryKeyPath();
+            GetLegacymRemoteNgRegistryKeyPath();
         }
 
-        public void UninstallLegacyVersion(bool Silent = false)
+        public void UninstallLegacyVersion(bool silent = false)
         {
-            if (!IsLegacymRemoteNGInstalled())
+            if (!IsLegacymRemoteNgInstalled())
                 return;
-            string uninstallString = GetLegacyUninstallString();
-            string forceNonTempUninstaller = string.Format("_?={0}", uninstallString.Replace("Uninstall.exe", "").Replace(@"""", ""));
-            string silentUninstall = "";
-            if (Silent)
+            var uninstallString = GetLegacyUninstallString();
+            var forceNonTempUninstaller = $"_?={uninstallString.Replace("Uninstall.exe", "").Replace(@"""", "")}";
+            var silentUninstall = "";
+            if (silent)
             {
                 silentUninstall = "/S";
             }
-            ProcessStartInfo processStartInfo = new ProcessStartInfo(uninstallString);
-            processStartInfo.UseShellExecute = true;
-            processStartInfo.Arguments = string.Format("{0} {1}", forceNonTempUninstaller, silentUninstall);
-            Process uninstallProcess = Process.Start(processStartInfo);
-            while (uninstallProcess.HasExited == false)
+            var processStartInfo = new ProcessStartInfo(uninstallString)
+            {
+                UseShellExecute = true,
+                Arguments = $"{forceNonTempUninstaller} {silentUninstall}"
+            };
+            var uninstallProcess = Process.Start(processStartInfo);
+            while (uninstallProcess != null && uninstallProcess.HasExited == false)
             {
                 Debug.WriteLine("Waiting for uninstaller to exit");
             }
         }
 
-        public bool IsLegacymRemoteNGInstalled()
+        public bool IsLegacymRemoteNgInstalled()
         {
             return (_activeRegistryPath != null);
         }
 
         public string GetLegacyUninstallString()
         {
-            if (IsLegacymRemoteNGInstalled())
-                return _activeRegistryPath.GetValue("UninstallString").ToString();
-            return "";
+            return IsLegacymRemoteNgInstalled() ? _activeRegistryPath.GetValue("UninstallString").ToString() : "";
         }
 
-        private void GetLegacymRemoteNGRegistryKeyPath()
+        private void GetLegacymRemoteNgRegistryKeyPath()
         {
             GetUninstallKeyPath();
             GetUninstallKeyPath6432();
@@ -62,20 +60,24 @@ namespace CustomActions
         {
             try
             {
-                _activeRegistryPath = Registry.LocalMachine.OpenSubKey(REGISTRY_PATH);
+                _activeRegistryPath = Registry.LocalMachine.OpenSubKey(RegistryPath);
+            }
+            catch (Exception)
+            {
+                // ignored
             }
-            catch (Exception ex)
-            { }
         }
 
         private void GetUninstallKeyPath6432()
         {
             try
             {
-                _activeRegistryPath = Registry.LocalMachine.OpenSubKey(REGISTRY_PATH_Wow6432);
+                _activeRegistryPath = Registry.LocalMachine.OpenSubKey(RegistryPathWow6432);
+            }
+            catch (Exception)
+            {
+                // ignored
             }
-            catch (Exception ex)
-            { }
         }
     }
 }

InstallerProjects/Installer/CustomActions/CheckForInstalledWindowsUpdates.wxs

@@ -2,11 +2,9 @@
 <Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
   <?include $(sys.CURRENTDIR)Includes\Config.wxi?>
 	<Fragment>
-    <CustomAction Id="SetRDP80KBValue" Return="check" Execute="immediate" Property="KB" Value="$(var.RDP80KB)" />
-    <CustomAction Id="CheckIfRDP80Installed" Return="check" Execute="immediate" BinaryKey="CustomActions.CA.dll" DllEntry="IsKBInstalled" />
+    <CustomAction Id="CheckIfMinimumRdpInstalled" Return="check" Execute="immediate" BinaryKey="CustomActions.CA.dll" DllEntry="IsMinimumRdpVersionInstalled" />
   </Fragment>
   <Fragment>
-    <CustomAction Id="SetRDP81KBValue" Return="check" Execute="immediate" Property="KB" Value="$(var.RDP81KB)" />
-    <CustomAction Id="CheckIfRDP81Installed" Return="check" Execute="immediate" BinaryKey="CustomActions.CA.dll" DllEntry="IsKBInstalled" />
+    <CustomAction Id="CheckIfRdpDtlsUpdateInstalled" Return="check" Execute="immediate" BinaryKey="CustomActions.CA.dll" DllEntry="IsRdpDtlsUpdateInstalled" />
   </Fragment>
 </Wix>

InstallerProjects/Installer/CustomActions/SaveInstallLocation.wxs

@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
+	<Fragment>
+    <!-- http://robmensching.com/blog/posts/2010/5/2/the-wix-toolsets-remember-property-pattern/ -->
+    <!-- This pattern allows a cmdline value to take precedence over values set from searchers (registry/file/etc) -->
+    
+    <!-- Save the INSTALLDIR value from the cmdline, if it was provided -->
+    <CustomAction Id="SaveCmdlineINSTALLDIR" Property="CMDLINE_INSTALLDIR" Value="[INSTALLDIR]" Execute="firstSequence" />
+
+    <!-- Set the INSTALLDIR value to the cmdline value, if one was provided -->
+    <CustomAction Id="SetFromCmdlineINSTALLDIR" Property="INSTALLDIR" Value="[CMDLINE_INSTALLDIR]" Execute="firstSequence" />
+
+
+    <InstallUISequence>
+      <Custom Action="SaveCmdlineINSTALLDIR" Before="AppSearch" />
+      <Custom Action="SetFromCmdlineINSTALLDIR" After="AppSearch">
+        CMDLINE_INSTALLDIR
+      </Custom>
+    </InstallUISequence>
+
+    <InstallExecuteSequence>
+      <Custom Action="SaveCmdlineINSTALLDIR" Before="AppSearch" />
+      <Custom Action="SetFromCmdlineINSTALLDIR" After="AppSearch">
+        CMDLINE_INSTALLDIR
+      </Custom>
+    </InstallExecuteSequence>
+    
+	</Fragment>
+</Wix>

InstallerProjects/Installer/Fragments/DirectoriesFragment.wxs

@@ -4,7 +4,7 @@
 	<Fragment>
     <Directory Id="TARGETDIR" Name="SourceDir">
       <Directory Id="$(var.PlatformProgramFilesFolder)">
-        <Directory Id="APPLICATIONROOTDIRECTORY" Name="$(var.ProductName)">
+        <Directory Id="INSTALLDIR" Name="$(var.ProductName)">
         </Directory>
       </Directory>
 

InstallerProjects/Installer/Fragments/MainExeFragment.wxs

@@ -2,7 +2,7 @@
 <Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
   <?include $(sys.CURRENTDIR)Includes\Config.wxi?>
 	<Fragment>
-    <Component Id="C.MainExe" Directory="APPLICATIONROOTDIRECTORY" Guid="*">
+    <Component Id="C.MainExe" Directory="INSTALLDIR" Guid="*">
       <File Id="MainExeFile" Source="$(var.SolutionDir)mRemoteV1\bin\$(var.Configuration)\mRemoteNG.exe" />
     </Component>
 	</Fragment>

InstallerProjects/Installer/Fragments/MiscTextFilesFragment.wxs

@@ -1,18 +1,21 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
 	<Fragment>
-    <ComponentGroup Id="CG.ProjectInfoFiles" Directory="APPLICATIONROOTDIRECTORY">
+    <ComponentGroup Id="CG.ProjectInfoFiles" Directory="INSTALLDIR">
       <Component Id="C.Changelog" Guid="*">
-        <File Id="ChangelogFile" Name="Changelog.txt" Source="$(var.SolutionDir)CHANGELOG.TXT" KeyPath="yes" />
+        <File Id="ChangelogFile" Name="Changelog.txt" Source="$(var.SolutionDir)CHANGELOG.md" KeyPath="yes" />
       </Component>
       <Component Id="C.Credits" Guid="*">
-        <File Id="CreditsFile" Name="Credits.txt" Source="$(var.SolutionDir)CREDITS.TXT" KeyPath="yes" />
+        <File Id="CreditsFile" Name="Credits.txt" Source="$(var.SolutionDir)CREDITS.md" KeyPath="yes" />
       </Component>
       <Component Id="C.License" Guid="*">
         <File Id="LicenseFile" Name="License.txt" Source="$(var.SolutionDir)COPYING.TXT" KeyPath="yes" />
       </Component>
       <Component Id="C.Readme" Guid="*">
-        <File Id="ReadmeFile" Name="Readme.txt" Source="$(var.SolutionDir)README.TXT" KeyPath="yes" />
+        <File Id="ReadmeFile" Name="Readme.txt" Source="$(var.SolutionDir)README.md" KeyPath="yes" />
+      </Component>
+      <Component Id="C.TileManifest" Guid="*">
+        <File Id="TileManifest" Name="mRemoteNG.VisualElementsManifest.xml" Source="$(var.SolutionDir)mRemoteV1\bin\Release\mRemoteNG.VisualElementsManifest.xml" KeyPath="yes" />
       </Component>
     </ComponentGroup>
 	</Fragment>

InstallerProjects/Installer/Fragments/PuTTYNGFragment.wxs

@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
 	<Fragment>
-    <DirectoryRef Id="APPLICATIONROOTDIRECTORY">
+    <DirectoryRef Id="INSTALLDIR">
       <Component Id="C.PuttyNGFile" Guid="*">
         <File Id="PuttyNGFile" Name="PuTTYNG.exe" Source="$(var.HarvestPath)\PuTTYNG.exe" KeyPath="yes" />
       </Component>

InstallerProjects/Installer/Fragments/RegistryEntriesFragment.wxs

@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Wix xmlns="http://schemas.microsoft.com/wix/2006/wi">
+	<Fragment>
+    <DirectoryRef Id="TARGETDIR">
+      <Component Id="C.RegistryEntries" Guid="*">
+        <RegistryKey Root="HKLM" Key="Software\mRemoteNG">
+          <RegistryValue Type="string" Name="InstallDir" Value="[INSTALLDIR]" KeyPath="yes" />
+        </RegistryKey>
+      </Component>
+    </DirectoryRef>
+	</Fragment>
+</Wix>

InstallerProjects/Installer/Fragments/ShortcutFragment.wxs

@@ -5,17 +5,17 @@
     
     <DirectoryRef Id="DesktopFolder">
       <Component Id="C.DesktopShortcut" Guid="F78E5A16-A2F7-4BD9-9250-CBF3016CCCDA">
-        <Shortcut Id="DesktopShortcut" Name="$(var.ProductName)" Target="[APPLICATIONROOTDIRECTORY][MAINEXE]" WorkingDirectory="APPLICATIONROOTDIRECTORY" Icon="mRemoteNG.ico" />
+        <Shortcut Id="DesktopShortcut" Name="$(var.ProductName)" Target="[INSTALLDIR][MAINEXE]" WorkingDirectory="INSTALLDIR" Icon="AppIcon.ico" />
         <RegistryValue Root="HKCU" Key="Software\$(var.ProductName)" Name="DesktopShortcut" Type="integer" Value="1" KeyPath="yes" />
       </Component>
     </DirectoryRef>
     
     <DirectoryRef Id="ApplicationProgramsFolder">
       <Component Id="C.ApplicationStartMenuShortcut" Guid="193B9E14-F40E-44F1-8514-BED253BCBF75">
-        <Shortcut Id="ApplicationStartMenuShortcut" Name="$(var.ProductName)" Target="[APPLICATIONROOTDIRECTORY][MAINEXE]" WorkingDirectory="APPLICATIONROOTDIRECTORY" Icon="mRemoteNG.ico" />
-        <Shortcut Id="CreditsShortcut" Name="Credits" Target="[APPLICATIONROOTDIRECTORY]Credits.txt" WorkingDirectory="APPLICATIONROOTDIRECTORY" />
-        <Shortcut Id="LicenseShortcut" Name="License" Target="[APPLICATIONROOTDIRECTORY]License.txt" WorkingDirectory="APPLICATIONROOTDIRECTORY" />
-        <Shortcut Id="ReadmeShortcut" Name="Readme" Target="[APPLICATIONROOTDIRECTORY]Readme.txt" WorkingDirectory="APPLICATIONROOTDIRECTORY" />
+        <Shortcut Id="ApplicationStartMenuShortcut" Name="$(var.ProductName)" Target="[INSTALLDIR][MAINEXE]" WorkingDirectory="INSTALLDIR" Icon="AppIcon.ico" />
+        <Shortcut Id="CreditsShortcut" Name="Credits" Target="[INSTALLDIR]Credits.txt" WorkingDirectory="INSTALLDIR" />
+        <Shortcut Id="LicenseShortcut" Name="License" Target="[INSTALLDIR]License.txt" WorkingDirectory="INSTALLDIR" />
+        <Shortcut Id="ReadmeShortcut" Name="Readme" Target="[INSTALLDIR]Readme.txt" WorkingDirectory="INSTALLDIR" />
         <RemoveFolder Id="ApplicationProgramsFolder" On="uninstall"/>
         <RegistryValue Root="HKCU" Key="Software\$(var.ProductName)" Name="ApplicationStartMenuShortcut" Type="integer" Value="1" KeyPath="yes"/>
       </Component>

InstallerProjects/Installer/Includes/Config.wxi

@@ -16,8 +16,10 @@
   <?define RequiredDotNetFrameworkMinorVersion = "0" ?>
   <?define RequiredDotNetFrameworkServicePackLevel = "" ?>
   <?define RequiredDotNetFrameworkVersion = "$(var.RequiredDotNetFrameworkMajorVersion).$(var.RequiredDotNetFrameworkMinorVersion)" ?>
-  <?define RDP80KB = "KB2592687" ?>
-  <?define RDP81KB = "KB2923545" ?>
+  <?define Rdp80Kb = "KB2592687" ?>
+  <?define Rdp81Kb = "KB2830477" ?>
+  <?define MinimumRdpKb = $(var.Rdp80Kb) ?>
+  <?define RdpDtlsKb = "KB2574819" ?>
   <?define IGNOREPREREQUISITES = 0 ?>
   
   <?if $(var.Platform) = x64 ?>

InstallerProjects/Installer/Installer.wixproj

@@ -27,25 +27,23 @@
   </PropertyGroup>
   <ItemGroup>
     <Compile Include="CustomActions\CheckForInstalledWindowsUpdates.wxs" />
+    <Compile Include="CustomActions\SaveInstallLocation.wxs" />
     <Compile Include="CustomActions\UninstallLegacyVersions.wxs" />
     <Compile Include="Fragments\FilesFragment.wxs" />
     <Compile Include="Fragments\DirectoriesFragment.wxs" />
     <Compile Include="Fragments\MainExeFragment.wxs" />
     <Compile Include="Fragments\MiscTextFilesFragment.wxs" />
     <Compile Include="Fragments\PuTTYNGFragment.wxs" />
+    <Compile Include="Fragments\RegistryEntriesFragment.wxs" />
     <Compile Include="Fragments\ShortcutFragment.wxs" />
     <Compile Include="mRemoteNGV1.wxs" />
   </ItemGroup>
   <ItemGroup>
-    <Content Include="Dependencies\PuTTYNG.exe">
-      <CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
-    </Content>
     <Content Include="Filters\Harvest_Filter.xslt" />
     <Content Include="Includes\Config.wxi" />
-    <Content Include="Resources\header.bmp" />
-    <Content Include="Resources\License.rtf" />
-    <Content Include="Resources\mRemoteNG.ico" />
-    <Content Include="Resources\welcome.bmp" />
+    <Content Include="Resources\AppIcon.ico" />
+    <Content Include="Resources\Installer_Header.png" />
+    <Content Include="Resources\Installer_Side.png" />
   </ItemGroup>
   <ItemGroup>
     <Folder Include="CustomActions" />
@@ -55,17 +53,16 @@
     <Folder Include="Localizations" />
     <Folder Include="Filters" />
     <Folder Include="bin" />
-    <Folder Include="Dependencies" />
     <Folder Include="Resources" />
   </ItemGroup>
   <ItemGroup>
-    <EmbeddedResource Include="Localizations\ru-RU.wxl" />
-    <EmbeddedResource Include="Localizations\ja-JP.wxl" />
-    <EmbeddedResource Include="Localizations\cs-CZ.wxl" />
-    <EmbeddedResource Include="Localizations\de-DE.wxl" />
     <EmbeddedResource Include="Localizations\en-US.wxl" />
   </ItemGroup>
   <ItemGroup>
+    <WixExtension Include="WixUtilExtension">
+      <HintPath>$(WixExtDir)\WixUtilExtension.dll</HintPath>
+      <Name>WixUtilExtension</Name>
+    </WixExtension>
     <WixExtension Include="WixUIExtension">
       <HintPath>$(WixExtDir)\WixUIExtension.dll</HintPath>
       <Name>WixUIExtension</Name>
@@ -119,25 +116,23 @@ rmdir /S /Q "$(TargetDir)"
 echo $(ConfigurationName) &gt; buildenv.tmp
 
 REM Harvest bin directory of the mRemoteV1 project
-call "$(WIX)bin\heat.exe" dir "$(SolutionDir)mRemoteV1\bin\$(Configuration)" -ag -dr APPLICATIONROOTDIRECTORY -var var.HarvestPath -srd -cg MandatoryComponents -template fragment -out "$(ProjectDir)Fragments\FilesFragment.wxs" -t "$(ProjectDir)Filters\Harvest_Filter.xslt" -v
+"$(WIX)bin\heat.exe" dir "$(SolutionDir)mRemoteV1\bin\$(Configuration)" -ag -nologo -dr INSTALLDIR -var var.HarvestPath -srd -cg MandatoryComponents -template fragment -out "$(ProjectDir)Fragments\FilesFragment.wxs" -t "$(ProjectDir)Filters\Harvest_Filter.xslt"
 
 REM Convert the license file "COPYING.TXT" to "License.rtf" to be shown in the installer GUI
-call "$(ProjectDir)Resources\Pandoc\pandoc.exe" -s -t rtf -o "$(ProjectDir)\Resources\License.rtf" "$(SolutionDir)COPYING.TXT"</PreBuildEvent>
+"$(ProjectDir)Resources\Pandoc\pandoc.exe" -s -t rtf -o "$(ProjectDir)\Resources\License.rtf" "$(SolutionDir)COPYING.TXT"</PreBuildEvent>
   </PropertyGroup>
   <PropertyGroup>
-    <PostBuildEvent>set /p buildenv=&lt;buildenv.tmp
+    <PostBuildEvent>:: When passing paths to powershell scripts, check if the path ends with a backslash "\"
+:: If it does, then the backslash may be interpreted as an escape character. Add another backslash to cancel the first one.
 
-REM Sign MSI
-IF EXIST C:\mRemoteNG_code_signing_cert.pfx (
-    IF %25buildenv: Portable=%25==Release (
-        powershell "&amp;""$(SolutionDir)Tools\signfiles.ps1""" %27%25cd%25%27
-    )
-)
+powershell -noprofile -command "sleep 2"
 
-REM Rename MSI to include version number
-powershell -ExecutionPolicy Bypass -File "$(SolutionDir)Tools\rename_installer_with_version.ps1" $(SolutionDir)
+set /p buildenv=&lt;buildenv.tmp
 
-REM Copy MSI to Release folder
-IF %25buildenv: Portable=%25==Release (powershell -ExecutionPolicy Bypass -File  "$(SolutionDir)Tools\copy_release_installer.ps1" $(TargetDir) $(SolutionDir)Release)</PostBuildEvent>
+:: Manual builds, set the cert password and uncomment below.
+:: IF "%25APPVEYOR_BUILD_FOLDER"=="" ( set cert_pwd=  )
+
+:: Call the post build powershell script
+powershell.exe -ExecutionPolicy Bypass -File "$(SolutionDir)Tools\postbuild_installer.ps1" -SolutionDir "$(SolutionDir)\" -TargetDir "%25cd%25" -TargetFileName "mRemoteNG.exe" -ConfigurationName "%25buildenv%25" -CertificatePath "$(CertPath)" -CertificatePassword "$(CertPassword)" -ExcludeFromSigning "PuTTYNG.exe"</PostBuildEvent>
   </PropertyGroup>
 </Project>

InstallerProjects/Installer/Localizations/cs-CZ.wxl

@@ -1,26 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<WixLocalization Culture="cs-CZ" Language="1029" xmlns="http://schemas.microsoft.com/wix/2006/localization">
-  
-  <!-- Install Conditions -->
-  <String Id="Upgrade_NewerVersionInstalled" Overridable="yes">A newer version of [ProductName] is already installed.</String>
-  <String Id="Install_NeedToBeAdminToInstall">You need to be an administrator to install this product.</String>
-  <String Id="Install_NeedDotNetFrameworkVersion">mRemoteNG requires Microsoft .NET Framework $(var.RequiredDotNetFrameworkVersion).</String>
-  <String Id="Install_OSVersionRequirement">mRemoteNG requires Windows 7 SP1 or higher to run. Please update your operating system and try again.</String>
-  <String Id="Install_RDP80Requirement">mRemoteNG requires RDP 8.0 or higher to run. Windows 7 users will need to install KB2592687</String>
-  <String Id="Install_Win7RequiresSP1">For mRemoteNG to run on Windows 7, it requires Service Pack 1 to be installed. Please install Service Pack 1 and try again.</String>
-  
-  <!-- Directories and File names -->
-  <String Id="Folders_Desktop">Desktop</String>
-  <String Id="File_Credits">Credits</String>
-  <String Id="File_License">License</String>
-  <String Id="File_VersionHistory">Version History</String>
-  
-  <!-- Features and install options -->
-  <String Id="Feature_Complete">Complete</String>
-  <String Id="Feature_DesktopShortcut">Desktop Shortcut</String>
-  <String Id="Feature_StartMenuShortcut">Start menu shortcut</String>
-  
-  <!-- GUI Page Text -->
-  <String Id="FinishPage_LaunchMremoteNow" Overridable="yes">Launch [ProductName] Now</String>
-  
-</WixLocalization>

InstallerProjects/Installer/Localizations/de-DE.wxl

@@ -1,26 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<WixLocalization Culture="de-DE" Language="1031" xmlns="http://schemas.microsoft.com/wix/2006/localization">
-  
-  <!-- Install Conditions -->
-  <String Id="Upgrade_NewerVersionInstalled" Overridable="yes">A newer version of [ProductName] is already installed.</String>
-  <String Id="Install_NeedToBeAdminToInstall">You need to be an administrator to install this product.</String>
-  <String Id="Install_NeedDotNetFrameworkVersion">mRemoteNG requires Microsoft .NET Framework $(var.RequiredDotNetFrameworkVersion).</String>
-  <String Id="Install_OSVersionRequirement">mRemoteNG requires Windows 7 SP1 or higher to run. Please update your operating system and try again.</String>
-  <String Id="Install_RDP80Requirement">mRemoteNG requires RDP 8.0 or higher to run. Windows 7 users will need to install KB2592687</String>
-  <String Id="Install_Win7RequiresSP1">For mRemoteNG to run on Windows 7, it requires Service Pack 1 to be installed. Please install Service Pack 1 and try again.</String>
-
-  <!-- Directories and File names -->
-  <String Id="Folders_Desktop">Desktop</String>
-  <String Id="File_Credits">Credits</String>
-  <String Id="File_License">License</String>
-  <String Id="File_VersionHistory">Version History</String>
-
-  <!-- Features and install options -->
-  <String Id="Feature_Complete">Complete</String>
-  <String Id="Feature_DesktopShortcut">Desktop Shortcut</String>
-  <String Id="Feature_StartMenuShortcut">Start menu shortcut</String>
-
-  <!-- GUI Page Text -->
-  <String Id="FinishPage_LaunchMremoteNow" Overridable="yes">mRemoteNG jetzt Starten</String>
-  
-</WixLocalization>

InstallerProjects/Installer/Localizations/en-US.wxl

@@ -6,7 +6,8 @@
   <String Id="Install_NeedToBeAdminToInstall">You need to be an administrator to install this product.</String>
   <String Id="Install_NeedDotNetFrameworkVersion">mRemoteNG requires Microsoft .NET Framework [REQUIREDDOTNETFRAMEWORKVERSION] or higher.</String>
   <String Id="Install_OSVersionRequirement">mRemoteNG requires Windows 7 SP1 or higher to run. Please update your operating system and try again.</String>
-  <String Id="Install_RDP80Requirement">mRemoteNG requires RDP 8.0 or higher to run. Windows 7 users will need to install KB2592687</String>
+  <String Id="Install_RDP80Requirement">mRemoteNG requires RDP 8.0 or higher to run. Windows 7 users will need to install either KB2592687 (RDP 8.0) or KB2830477 (RDP 8.1)</String>
+  <String Id="Install_RDPDtlsRequirement">mRemoteNG requires KB2574819 in order to create RDP connections. Windows 7 users will need to install this KB.</String>
   <String Id="Install_Win7RequiresSP1">For mRemoteNG to run on Windows 7, it requires Service Pack 1 to be installed. Please install Service Pack 1 and try again.</String>
   
   <!-- Directories and File names -->
@@ -21,6 +22,6 @@
   <String Id="Feature_StartMenuShortcut">Start menu shortcut</String>
   
   <!-- GUI Page Text -->
-  <String Id="FinishPage_LaunchMremoteNow" Overridable="yes">Launch [ProductName] Now</String>
+  <String Id="FinishPage_LaunchMremoteNow" Overridable="yes">Launch mRemoteNG now</String>
   
 </WixLocalization>

InstallerProjects/Installer/Localizations/ja-JP.wxl

@@ -1,26 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<WixLocalization Culture="ja-JP" Language="1041" xmlns="http://schemas.microsoft.com/wix/2006/localization">
-  
-  <!-- Install Conditions -->
-  <String Id="Upgrade_NewerVersionInstalled" Overridable="yes">A newer version of [ProductName] is already installed.</String>
-  <String Id="Install_NeedToBeAdminToInstall">You need to be an administrator to install this product.</String>
-  <String Id="Install_NeedDotNetFrameworkVersion">mRemoteNG requires Microsoft .NET Framework $(var.RequiredDotNetFrameworkVersion).</String>
-  <String Id="Install_OSVersionRequirement">mRemoteNG requires Windows 7 SP1 or higher to run. Please update your operating system and try again.</String>
-  <String Id="Install_RDP80Requirement">mRemoteNG requires RDP 8.0 or higher to run. Windows 7 users will need to install KB2592687</String>
-  <String Id="Install_Win7RequiresSP1">For mRemoteNG to run on Windows 7, it requires Service Pack 1 to be installed. Please install Service Pack 1 and try again.</String>
-  
-  <!-- Directories and File names -->
-  <String Id="Folders_Desktop">Desktop</String>
-  <String Id="File_Credits">Credits</String>
-  <String Id="File_License">License</String>
-  <String Id="File_VersionHistory">Version History</String>
-  
-  <!-- Features and install options -->
-  <String Id="Feature_Complete">Complete</String>
-  <String Id="Feature_DesktopShortcut">Desktop Shortcut</String>
-  <String Id="Feature_StartMenuShortcut">Start menu shortcut</String>
-  
-  <!-- GUI Page Text -->
-  <String Id="FinishPage_LaunchMremoteNow" Overridable="yes">Launch [ProductName] Now</String>
-  
-</WixLocalization>

InstallerProjects/Installer/Localizations/ru-RU.wxl

@@ -1,26 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<WixLocalization Culture="ru-RU" Language="1049" xmlns="http://schemas.microsoft.com/wix/2006/localization">
-  
-  <!-- Install Conditions -->
-  <String Id="Upgrade_NewerVersionInstalled" Overridable="yes">A newer version of [ProductName] is already installed.</String>
-  <String Id="Install_NeedToBeAdminToInstall">You need to be an administrator to install this product.</String>
-  <String Id="Install_NeedDotNetFrameworkVersion">mRemoteNG requires Microsoft .NET Framework $(var.RequiredDotNetFrameworkVersion).</String>
-  <String Id="Install_OSVersionRequirement">mRemoteNG requires Windows 7 SP1 or higher to run. Please update your operating system and try again.</String>
-  <String Id="Install_RDP80Requirement">mRemoteNG requires RDP 8.0 or higher to run. Windows 7 users will need to install KB2592687</String>
-  <String Id="Install_Win7RequiresSP1">For mRemoteNG to run on Windows 7, it requires Service Pack 1 to be installed. Please install Service Pack 1 and try again.</String>
-  
-  <!-- Directories and File names -->
-  <String Id="Folders_Desktop">Desktop</String>
-  <String Id="File_Credits">Credits</String>
-  <String Id="File_License">License</String>
-  <String Id="File_VersionHistory">Version History</String>
-  
-  <!-- Features and install options -->
-  <String Id="Feature_Complete">Complete</String>
-  <String Id="Feature_DesktopShortcut">Desktop Shortcut</String>
-  <String Id="Feature_StartMenuShortcut">Start menu shortcut</String>
-  
-  <!-- GUI Page Text -->
-  <String Id="FinishPage_LaunchMremoteNow" Overridable="yes">Launch [ProductName] Now</String>
-  
-</WixLocalization>

InstallerProjects/Installer/Resources/License.rtf

@@ -0,0 +1,82 @@
+{\rtf1\ansi\deff0{\fonttbl{\f0 \fswiss Helvetica;}{\f1 Courier;}}
+{\colortbl;\red255\green0\blue0;\red0\green0\blue255;}
+\widowctrl\hyphauto
+
+{\pard \ql \f0 \sa180 \li0 \fi0 \f1         GNU GENERAL PUBLIC LICENSE\line
+           Version 2, June 1991\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 \f1             Preamble\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 The precise terms and conditions for copying, distribution and modification follow.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 \f1         GNU GENERAL PUBLIC LICENSE\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION\par}
+{\pard \ql \f0 \sa0 \li360 \fi-360 0.\tx360\tab This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you".\sa180\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.\par}
+{\pard \ql \f0 \sa0 \li360 \fi-360 1.\tx360\tab You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.\sa180\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.\par}
+{\pard \ql \f0 \sa180 \li360 \fi-360 2.\tx360\tab You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:\par}
+{\pard \ql \f0 \sa180 \li720 \fi-360 a)\tx360\tab You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.\par}
+{\pard \ql \f0 \sa180 \li720 \fi-360 b)\tx360\tab You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.\par}
+{\pard \ql \f0 \sa180 \li720 \fi-360 c)\tx360\tab If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)\sa180\sa180\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.\par}
+{\pard \ql \f0 \sa180 \li360 \fi-360 3.\tx360\tab You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:\par}
+{\pard \ql \f0 \sa180 \li720 \fi-360 a)\tx360\tab Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,\par}
+{\pard \ql \f0 \sa180 \li720 \fi-360 b)\tx360\tab Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,\par}
+{\pard \ql \f0 \sa180 \li720 \fi-360 c)\tx360\tab Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)\sa180\sa180\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.\par}
+{\pard \ql \f0 \sa180 \li360 \fi-360 4.\tx360\tab You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.\par}
+{\pard \ql \f0 \sa180 \li360 \fi-360 5.\tx360\tab You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.\par}
+{\pard \ql \f0 \sa180 \li360 \fi-360 6.\tx360\tab Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.\par}
+{\pard \ql \f0 \sa180 \li360 \fi-360 7.\tx360\tab If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.\sa180\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.\par}
+{\pard \ql \f0 \sa180 \li360 \fi-360 8.\tx360\tab If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.\par}
+{\pard \ql \f0 \sa180 \li360 \fi-360 9.\tx360\tab The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.\sa180\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.\par}
+{\pard \ql \f0 \sa180 \li360 \fi-360 10.\tx360\tab If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.\par}
+{\pard \ql \f0 \sa180 \li360 \fi0 \f1         NO WARRANTY\par}
+{\pard \ql \f0 \sa180 \li360 \fi-360 11.\tx360\tab BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.\par}
+{\pard \ql \f0 \sa180 \li360 \fi-360 12.\tx360\tab IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.\par}
+{\pard \ql \f0 \sa180 \li360 \fi0 \f1      END OF TERMS AND CONDITIONS\line
+\line
+How to Apply These Terms to Your New Programs\sa180\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 \f1 <one line to give the program's name and a brief idea of what it does.>\line
+Copyright (C) <year>  <name of author>\line
+\line
+This program is free software; you can redistribute it and/or modify\line
+it under the terms of the GNU General Public License as published by\line
+the Free Software Foundation; either version 2 of the License, or\line
+(at your option) any later version.\line
+\line
+This program is distributed in the hope that it will be useful,\line
+but WITHOUT ANY WARRANTY; without even the implied warranty of\line
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\line
+GNU General Public License for more details.\line
+\line
+You should have received a copy of the GNU General Public License along\line
+with this program; if not, write to the Free Software Foundation, Inc.,\line
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 Also add information on how to contact you by electronic and paper mail.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 If the program is interactive, make it output a short notice like this when it starts in an interactive mode:\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 \f1 Gnomovision version 69, Copyright (C) year name of author\line
+Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.\line
+This is free software, and you are welcome to redistribute it\line
+under certain conditions; type `show c' for details.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 The hypothetical commands {\f1 show w' and}show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than {\f1 show w' and}show c'; they could even be mouse-clicks or menu items--whatever suits your program.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 , 1 April 1989 Ty Coon, President of Vice\par}
+{\pard \ql \f0 \sa180 \li0 \fi0 This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.\par}
+}

InstallerProjects/Installer/mRemoteNGV1.wxs

@@ -10,26 +10,40 @@
     <MajorUpgrade DowngradeErrorMessage="!(loc.Upgrade_NewerVersionInstalled)" Schedule="afterInstallExecute" />
     <MediaTemplate EmbedCab="yes" />
     <Binary Id="CustomActions.CA.dll" SourceFile="$(var.SolutionDir)InstallerProjects\CustomActions\bin\$(var.Configuration)\CustomActions.CA.dll" />
-    <Property Id="ARPPRODUCTICON" Value="mRemoteNG.ico" />
+    <Property Id="MsiLogging" Value="v" />
+    <Property Id="ARPPRODUCTICON" Value="AppIcon.ico" />
     <Property Id="ARPHELPLINK" Value="http://www.mremoteng.org" />
+    <SetProperty Id="ARPINSTALLLOCATION" Value="[INSTALLDIR]" After="CostFinalize" />
     <Property Id="MAINEXE" Value="$(var.ExeProcessName)" />
-    <Property Id="APPLICATIONROOTDIRECTORY">
+    <Property Id="INSTALLDIR">
       <RegistrySearch Id='mRemoteNGRegistry' Type='raw' Root='HKLM' Key='Software\mRemoteNG' Name='InstallDir' />
     </Property>
+    <Property Id='RDP_DTLS_KB' Value='$(var.RdpDtlsKb)' />
+    <Property Id='RDP_DTLS_UPDATE_INSTALLED' Value='0' Secure='yes' />
+    <Property Id='RDP80_KB' Value='$(var.Rdp80Kb)' />
+    <Property Id='RDP81_KB' Value='$(var.Rdp81Kb)' />
+    <Property Id='MINIMUM_RDP_VERSION_INSTALLED' Value='0' Secure='yes' />
     <Property Id='REQUIREDDOTNETFRAMEWORKVERSION' Value='$(var.RequiredDotNetFrameworkVersion)' />
     <Property Id='LEGACYVERSIONINSTALLED' Value='0' />
     <PropertyRef Id="NETFRAMEWORK40FULL" />
     <PropertyRef Id="WIX_IS_NETFRAMEWORK_40_OR_LATER_INSTALLED" />
-    <Icon Id="mRemoteNG.ico" SourceFile="Resources\mRemoteNG.ico" />
+    <Icon Id="AppIcon.ico" SourceFile="Resources\AppIcon.ico" />
+    <CustomActionRef Id='SaveCmdlineINSTALLDIR' />
 
 
     <InstallUISequence>
-      <Custom Action="SetRDP80KBValue" After="AppSearch" />
-      <Custom Action="CheckIfRDP80Installed" After="SetRDP80KBValue">(NOT Installed) AND (VersionNT = 601 OR VersionNT64 = 601)</Custom>
       <LaunchConditions After="SetWIX_IS_NETFRAMEWORK_40_OR_LATER_INSTALLED" />
       <Custom Action="CheckIfLegacyVersionInstalled" After="LaunchConditions" />
       <Custom Action="UninstallLegacyVersion" After="CheckIfLegacyVersionInstalled">(NOT Installed) AND (LEGACYVERSIONINSTALLED = 1)</Custom>
     </InstallUISequence>
+
+    <InstallExecuteSequence>
+      <Custom Action="CheckIfRdpDtlsUpdateInstalled" After="AppSearch">(NOT Installed) AND (VersionNT = 601 OR VersionNT64 = 601)</Custom>
+      <Custom Action="CheckIfMinimumRdpInstalled" After="CheckIfRdpDtlsUpdateInstalled">(NOT Installed) AND (VersionNT = 601 OR VersionNT64 = 601)</Custom>
+      <LaunchConditions After="SetWIX_IS_NETFRAMEWORK_40_OR_LATER_INSTALLED" />
+      <Custom Action="CheckIfLegacyVersionInstalled" After="LaunchConditions" />
+      <Custom Action="UninstallLegacyVersion" After="CheckIfLegacyVersionInstalled">(NOT Installed) AND (LEGACYVERSIONINSTALLED = 1)</Custom>
+    </InstallExecuteSequence>
     
     
     <!-- Need to be admin to install -->
@@ -48,18 +62,23 @@
     <Condition Message="!(loc.Install_NeedDotNetFrameworkVersion)">
       <![CDATA[Installed OR (IGNOREPREREQUISITES = 1) OR WIX_IS_NETFRAMEWORK_40_OR_LATER_INSTALLED = 1]]>
     </Condition>
-    <!-- If Win7, require RDP 8.0 update (KB2592687) -->
+    <!-- If Win7, require RDP DTLS update (KB2574819) -->
+    <Condition Message="!(loc.Install_RDPDtlsRequirement)">
+      <![CDATA[Installed OR (IGNOREPREREQUISITES = 1) OR (VersionNT >= 602 OR VersionNT64 >= 602) OR ((VersionNT = 601 OR VersionNT64 = 601) AND (RDP_DTLS_UPDATE_INSTALLED = 1))]]>
+    </Condition>
+    <!-- If Win7, require RDP 8.0 (KB2592687) or 8.1 (KB2830477) update  -->
     <Condition Message="!(loc.Install_RDP80Requirement)">
-      <![CDATA[Installed OR (IGNOREPREREQUISITES = 1) OR (VersionNT >= 602 OR VersionNT64 >= 602) OR ((VersionNT = 601 OR VersionNT64 = 601) ]]>AND ($(var.RDP80KB) = 1 OR $(var.RDP81KB) = 1))
+      <![CDATA[Installed OR (IGNOREPREREQUISITES = 1) OR (VersionNT >= 602 OR VersionNT64 >= 602) OR ((VersionNT = 601 OR VersionNT64 = 601) AND (MINIMUM_RDP_VERSION_INSTALLED = 1))]]>
     </Condition>
     
     
 
     <Feature Id="F.Complete" Title="!(loc.Feature_Complete)" Display="expand" AllowAdvertise="no" Level="1">
-      <Feature Id="F.MinimalFeature" Title="$(var.ProductName)" Absent="disallow" ConfigurableDirectory="APPLICATIONROOTDIRECTORY" Level="1">
+      <Feature Id="F.MinimalFeature" Title="$(var.ProductName)" Absent="disallow" ConfigurableDirectory="INSTALLDIR" Level="1">
         <ComponentGroupRef Id="MandatoryComponents" Primary="yes" />
         <ComponentRef Id="C.MainExe" Primary="yes" />
         <ComponentGroupRef Id="CG.ProjectInfoFiles" Primary="yes" />
+        <ComponentRef Id="C.RegistryEntries" Primary="yes" />
       </Feature>
 
       <Feature Id="F.PuttyNG" Title="PuTTYNG" Absent="allow" AllowAdvertise="no" Level="1">
@@ -75,10 +94,22 @@
       </Feature>
     </Feature>
 
+    <UI>
+      <UIRef Id="WixUI_FeatureTree"/>
+      <UIRef Id="WixUI_ErrorProgressText" />
+      <Publish Dialog="ExitDialog"
+        Control="Finish"
+        Event="DoAction"
+        Value="LaunchApplication">WIXUI_EXITDIALOGOPTIONALCHECKBOX = 1 and NOT Installed</Publish>
+    </UI>
     
-    <UIRef Id="WixUI_FeatureTree"/>
     <WixVariable Id="WixUILicenseRtf" Value="Resources\License.rtf" />
-    <WixVariable Id="WixUIDialogBmp" Value="Resources\welcome.bmp" />
-    <WixVariable Id="WixUIBannerBmp" Value="Resources\header.bmp" />
+    <WixVariable Id="WixUIDialogBmp" Value="Resources\Installer_Side.png" />
+    <WixVariable Id="WixUIBannerBmp" Value="Resources\Installer_Header.png" />
+    
+    <!-- Provide option to run app after install -->
+    <Property Id="WIXUI_EXITDIALOGOPTIONALCHECKBOXTEXT" Value="!(loc.FinishPage_LaunchMremoteNow)" />
+    <Property Id="WixShellExecTarget" Value="[#MainExeFile]" />
+    <CustomAction Id="LaunchApplication" BinaryKey="WixCA" DllEntry="WixShellExec" Impersonate="yes" />
   </Product>
 </Wix>

Jenkinsfile

@@ -1,49 +1,63 @@
+#!groovy​
 node('windows') {
 	def jobDir = pwd()
 	def solutionFilePath = "\"${jobDir}\\mRemoteV1.sln\""
-	def vsToolsDir = "C:\\Program Files (x86)\\Microsoft Visual Studio 14.0\\Common7\\Tools"
-	def vsExtensionsDir = "C:\\Program Files (x86)\\Microsoft Visual Studio 14.0\\Common7\\IDE\\CommonExtensions\\Microsoft\\TestWindow"
+	def msBuild = "C:\\Program Files (x86)\\Microsoft Visual Studio\\2017\\Community\\MSBuild\\15.0\\Bin\\msbuild.exe"
+	def nunitConsolePath = "${jobDir}\\packages\\NUnit.ConsoleRunner.3.7.0\\tools\\nunit3-console.exe"
+	def openCoverPath = "${jobDir}\\packages\\OpenCover.4.6.519\\tools\\OpenCover.Console.exe"
+	def reportGeneratorPath = "${jobDir}\\packages\\ReportGenerator.3.0.2\\tools\\ReportGenerator.exe"
+	def testResultFilePrefix = "TestResult"
+	def testResultFileNormal = "${testResultFilePrefix}_UnitTests_normal.xml"
+	def testResultFilePortable = "${testResultFilePrefix}_UnitTests_portable.xml"
+	def testResultFileAcceptance = "${testResultFilePrefix}_AcceptanceTests.xml"
+	def coverageReport = "code_coverage_report.xml"
+	def codeCoverageHtml = "CodeCoverageReport.html"
 	
-	stage 'Checkout Branch'
-	def gitUrl = "https://github.com/mRemoteNG/mRemoteNG.git"
-	def branchName = GetBranchName()
-	echo "BranchName: ${branchName}"
-	git([url: gitUrl, branch: branchName])
-
-	stage 'Restore NuGet Packages'
-	def nugetPath = "C:\\nuget.exe"
-	bat "${nugetPath} restore ${solutionFilePath}"
-
-	stage 'Build mRemoteNG (Normal)'
-	bat "\"${vsToolsDir}\\VsDevCmd.bat\" && msbuild.exe /nologo /p:Platform=x86 \"${jobDir}\\mRemoteV1.sln\""
-
-	stage 'Build mRemoteNG (Portable)'
-	bat "\"${vsToolsDir}\\VsDevCmd.bat\" && msbuild.exe /nologo /p:Configuration=\"Debug Portable\";Platform=x86 \"${jobDir}\\mRemoteV1.sln\""
-
-	stage 'Run Unit Tests'
-	def nunitTestAdapterPath = "C:\\Users\\Administrator\\AppData\\Local\\Microsoft\\VisualStudio\\14.0\\Extensions"
-	bat "\"${vsToolsDir}\\VsDevCmd.bat\" && VSTest.Console.exe /TestAdapterPath:${nunitTestAdapterPath} \"${jobDir}\\mRemoteNGTests\\bin\\debug\\mRemoteNGTests.dll\""
-}
-def GetBranchName() {
-	def jobDir = pwd()
-	echo "JobDir: ${jobDir}"
-	def patternToUse = GetPatternToMatchBranchNameFromDirectory()
-	echo "PatternToUse: ${patternToUse}"
-	java.util.regex.Matcher matcher = jobDir =~ patternToUse
-	echo "Ran the matcher"
-	matcher ? matcher[0][1] : null
-}
-def GetPatternToMatchBranchNameFromDirectory() {
-	def patternToUse = ""
-	def folderSeparator = ""
-	def branchNamePattern = "[a-zA-Z0-9\\-_.]*"
-	def jenkinsJobInfoTag = "@*[0-9]*"
-	echo "isUnix: ${isUnix()}"
-	if (isUnix()) {
-		folderSeparator = "/"
-	} else {
-		folderSeparator =  "\\\\"
+	stage ('Checkout Branch') {
+		checkout scm
+		bat "del /Q \"${jobDir}\\${testResultFilePrefix}*.xml\""
 	}
-	patternToUse = "${folderSeparator}(${branchNamePattern})(${jenkinsJobInfoTag})\$"
-	patternToUse
-}
+
+	stage ('Restore NuGet Packages') {
+		def nugetPath = "C:\\nuget.exe"
+		bat "${nugetPath} restore ${solutionFilePath}"
+	}
+
+	stage ('Build mRemoteNG (Normal)') {
+		bat "\"${msBuild}\" /nologo /p:Platform=x86 \"${jobDir}\\mRemoteV1.sln\""
+	}
+
+	stage ('Build mRemoteNG (Portable)') {
+		bat "\"${msBuild}\" /nologo /p:Configuration=\"Debug Portable\";Platform=x86 \"${jobDir}\\mRemoteV1.sln\""
+	}
+
+	stage ('Run Unit Tests (Normal, w/coverage)') {
+		try {
+			bat "\"${openCoverPath}\" -register:user -target:\"${nunitConsolePath}\" -targetargs:\"\"${jobDir}\\mRemoteNGTests\\bin\\debug\\mRemoteNGTests.dll\" --result=${testResultFileNormal} --x86\" -output:\"${coverageReport}\""
+		}
+		catch (ex) {
+			nunit testResultsPattern: "${testResultFilePrefix}*.xml"
+			throw ex
+		}
+	}
+	
+	stage ('Run Unit Tests (Portable)') {
+		try {
+			bat "\"${nunitConsolePath}\" \"${jobDir}\\mRemoteNGTests\\bin\\debug portable\\mRemoteNGTests.dll\" --result=${testResultFilePortable} --x86"
+		}
+		catch (ex) {
+			nunit testResultsPattern: "${testResultFilePrefix}*.xml"
+			throw ex
+		}
+	}
+	
+	stage ('Run Acceptance Tests') {
+		try {
+			bat "\"${nunitConsolePath}\" \"${jobDir}\\mRemoteNG.Specs\\bin\\debug\\mRemoteNG.Specs.dll\" --result=${testResultFileAcceptance} --x86"
+		}
+		catch (ex) {
+			nunit testResultsPattern: "${testResultFilePrefix}*.xml"
+			throw ex
+		}
+	}
+}

Jenkinsfile_publish.groovy

@@ -0,0 +1,71 @@
+node('windows') {
+	def jobDir = pwd()
+	def solutionFilePath = "\"${jobDir}\\mRemoteV1.sln\""
+    def msBuild = "C:\\Program Files (x86)\\Microsoft Visual Studio\\2017\\Community\\MSBuild\\15.0\\Bin\\msbuild.exe"
+    def nunitConsolePath = "${jobDir}\\packages\\NUnit.ConsoleRunner.3.10.0\\tools\\nunit3-console.exe"
+    def openCoverPath = "${jobDir}\\packages\\OpenCover.4.6.519\\tools\\OpenCover.Console.exe"
+    def testResultFilePrefix = "TestResult"
+    def testResultFileNormal = "${testResultFilePrefix}_UnitTests_normal.xml"
+    def testResultFilePortable = "${testResultFilePrefix}_UnitTests_portable.xml"
+    def coverageReport = "code_coverage_report.xml"
+
+	
+	stage ('Clean output dir') {
+		bat script: "rmdir /S /Q \"${jobDir}\\Release\" 2>nul", returnStatus: true
+	}
+
+	stage ('Checkout Branch') {
+    	checkout([
+    	    $class: 'GitSCM',
+    	    branches: [[name: '*/${TargetBranch}']],
+            doGenerateSubmoduleConfigurations: false, 
+            extensions: [],
+            submoduleCfg: [], 
+            userRemoteConfigs: [[
+                credentialsId: '9c3fbff4-5b90-402f-a298-00e607fcec87', 
+                url: 'https://github.com/mRemoteNG/mRemoteNG.git'
+            ]]
+        ])
+	}
+
+	stage ('Restore NuGet Packages') {
+    	def nugetPath = "C:\\nuget.exe"
+    	bat "${nugetPath} restore ${solutionFilePath}"
+	}
+
+    withCredentials([file(credentialsId: '9b674d57-6792-48e3-984a-4d1bab2abb64', variable: 'CODE_SIGNING_CERT')]) {
+        withCredentials([usernamePassword(credentialsId: '05b7449b-05c0-490f-8661-236242526e62', passwordVariable: 'MRNG_CERT_PASSWORD', usernameVariable: 'NO_USERNAME')]) {
+            stage ('Build mRemoteNG (Normal - MSI)') {
+                bat "\"${msBuild}\" /nologo /t:Clean,Build /p:Configuration=\"Release Installer\" /p:Platform=x86 /p:CertPath=\"${env.CODE_SIGNING_CERT}\" /p:CertPassword=${env.MRNG_CERT_PASSWORD} \"${jobDir}\\mRemoteV1.sln\""
+                archiveArtifacts artifacts: "Release\\*.msi", caseSensitive: false, onlyIfSuccessful: true, fingerprint: true
+            }
+        
+            stage ('Build mRemoteNG (Portable)') {
+                bat "\"${msBuild}\" /nologo /t:Clean,Build /p:Configuration=\"Release Portable\" /p:Platform=x86 /p:CertPath=\"${env.CODE_SIGNING_CERT}\" /p:CertPassword=${env.MRNG_CERT_PASSWORD} \"${jobDir}\\mRemoteV1.sln\""
+                archiveArtifacts artifacts: "Release\\*.zip", caseSensitive: false, onlyIfSuccessful: true, fingerprint: true
+            }
+        }
+    }
+	
+    stage ('Run Unit Tests (Normal - MSI)') {
+        bat "\"${nunitConsolePath}\" \"${jobDir}\\mRemoteNGTests\\bin\\release\\mRemoteNGTests.dll\" --result=${testResultFileNormal} --x86"
+    }
+    
+    stage ('Run Unit Tests (Portable)') {
+        bat "\"${nunitConsolePath}\" \"${jobDir}\\mRemoteNGTests\\bin\\release portable\\mRemoteNGTests.dll\" --result=${testResultFilePortable} --x86"
+    }
+
+    stage ('Generate UpdateCheck Files') {
+        bat "powershell -ExecutionPolicy Bypass -File \"${jobDir}\\Tools\\create_upg_chk_files.ps1\" -TagName \"${env.TagName}\" -UpdateChannel \"${env.UpdateChannel}\""
+        archiveArtifacts artifacts: "Release\\*.txt", caseSensitive: false, onlyIfSuccessful: true
+    }
+	
+    stage ('Publish to GitHub') {
+        withCredentials([string(credentialsId: '5443a369-dbe8-42d3-b4e8-04d0b4e9039a', variable: 'GH_AUTH_TOKEN')]) {
+            def releaseFolder = "${jobDir}\\Release"
+            // because batch files suck at handling newline characters, we have to convert to base64 in groovy and back to text in powershell
+            def base64Description = env.ReleaseDescription.bytes.encodeBase64().toString()
+            bat "powershell -ExecutionPolicy Bypass -File \"${jobDir}\\Tools\\publish_to_github.ps1\" -Owner \"mRemoteNG\" -Repository \"mRemoteNG\" -ReleaseTitle \"${env.ReleaseTitle}\" -TagName \"${env.TagName}\" -TargetCommitish \"${env.TargetBranch}\" -Description \"${base64Description}\" -IsDraft ${env.IsDraft} -IsPrerelease ${env.IsPreRelease} -ReleaseFolderPath \"${releaseFolder}\" -AuthToken \"${env.GH_AUTH_TOKEN}\" -DescriptionIsBase64Encoded"
+        }
+    }
+}

Old_Installer/DotNetVer.nsh

@@ -1,296 +0,0 @@
-; ---------------------
-;      DotNetVer.nsh
-;      Written by: David Grinberg
-;      Homepage: http://ontheperiphery.veraida.com/
-;      Updated By: Brandon Hansen (http://www.remotehams.com/)
-; ---------------------
-;
-; LogicLib extensions for checking Microsoft .NET Framework versions and service packs.
-;
-; Latests Updates by Brandon Hansen, KG6YPI (RemoteHams.com)
-; Dec 26, 2011 - .NET Framework 4.0 detection fixes - client profile not being found
-; Dec 07, 2010 - .NET Framework 4.0 detection added by Brandon Hansen (KG6YPI)
-;
-; Usage examples:
-;
-; ${If} ${HasDotNet4.0}
-;    DetailPrint "Microsoft .NET Framework 4.0 installed."
-;    ${If} ${DOTNETVER_4_0} AtLeastDotNetServicePack 1
-;        DetailPrint "Microsoft .NET Framework 4.0 is at least SP1."
-;    ${Else}
-;        DetailPrint "Microsoft .NET Framework 4.0 SP1 not installed."
-;    ${EndIf}
-;    ${If} ${DOTNETVER_4_0} HasDotNetClientProfile 1
-;        DetailPrint "Microsoft .NET Framework 4.0 (Client Profile) available."
-;    ${EndIf}
-;    ${If} ${DOTNETVER_4_0} HasDotNetFullProfile 1
-;        DetailPrint "Microsoft .NET Framework 4.0 (Full Profile) available."
-;    ${EndIf}
-;    ${If} ${DOTNETVER_4_0} HasDotNetFullProfile 0
-;        DetailPrint "Microsoft .NET Framework 4.0 (Full Profile) not available."
-;    ${EndIf}
-; ${EndIf}
- 
- 
-!verbose push
-!verbose 3
- 
-!ifndef ___DOTNETVER__NSH___
-!define ___DOTNETVER__NSH___
- 
-!include LogicLib.nsh
-!include Util.nsh
- 
-# constants
- 
-!define DOTNETVER_1_0  "1.0"
-!define DOTNETVER_1_1  "1.1"
-!define DOTNETVER_2_0  "2.0"
-!define DOTNETVER_3_0  "3.0"
-!define DOTNETVER_3_5  "3.5"
-!define DOTNETVER_4_0  "4.0"
- 
-# variable declaration
- 
-Var /GLOBAL __DONTNET_FOUNDVER
- 
-!macro __DotNetVer_DeclareVars
-    !ifndef __DOTNETVER_VARS_DECLARED
-        !define __DOTNETVER_VARS_DECLARED
-        Var /GLOBAL __DOTNET_1.0
-        Var /GLOBAL __DOTNET_1.1
-        Var /GLOBAL __DOTNET_2.0
-        Var /GLOBAL __DOTNET_3.0
-        Var /GLOBAL __DOTNET_3.5
-        Var /GLOBAL __DOTNET_4.0
- 
-        Var /GLOBAL __DOTNETVER_1.0_SP
-        Var /GLOBAL __DOTNETVER_1.1_SP
-        Var /GLOBAL __DOTNETVER_2.0_SP
-        Var /GLOBAL __DOTNETVER_3.0_SP
-        Var /GLOBAL __DOTNETVER_3.5_SP
-        Var /GLOBAL __DOTNETVER_4.0_SP
- 
-        Var /GLOBAL __DOTNET_1.0_CLIENT
-        Var /GLOBAL __DOTNET_1.1_CLIENT
-        Var /GLOBAL __DOTNET_2.0_CLIENT
-        Var /GLOBAL __DOTNET_3.0_CLIENT
-        Var /GLOBAL __DOTNET_3.5_CLIENT
-        Var /GLOBAL __DOTNET_4.0_CLIENT
- 
-        Var /GLOBAL __DOTNET_1.0_FULL
-        Var /GLOBAL __DOTNET_1.1_FULL
-        Var /GLOBAL __DOTNET_2.0_FULL
-        Var /GLOBAL __DOTNET_3.0_FULL
-        Var /GLOBAL __DOTNET_3.5_FULL
-        Var /GLOBAL __DOTNET_4.0_FULL
- 
-        StrCpy $__DOTNET_1.0 0
-        StrCpy $__DOTNET_1.1 0
-        StrCpy $__DOTNET_2.0 0
-        StrCpy $__DOTNET_3.0 0
-        StrCpy $__DOTNET_3.5 0
-        StrCpy $__DOTNET_4.0 0
- 
-        StrCpy $__DOTNETVER_1.0_SP 0
-        StrCpy $__DOTNETVER_1.1_SP 0
-        StrCpy $__DOTNETVER_2.0_SP 0
-        StrCpy $__DOTNETVER_3.0_SP 0
-        StrCpy $__DOTNETVER_3.5_SP 0
-        StrCpy $__DOTNETVER_4.0_SP 0
- 
-        StrCpy $__DOTNET_1.0_CLIENT 0
-        StrCpy $__DOTNET_1.1_CLIENT 0
-        StrCpy $__DOTNET_2.0_CLIENT 0
-        StrCpy $__DOTNET_3.0_CLIENT 0
-        StrCpy $__DOTNET_3.5_CLIENT 0
-        StrCpy $__DOTNET_4.0_CLIENT 0
- 
-        StrCpy $__DOTNET_1.0_FULL 0
-        StrCpy $__DOTNET_1.1_FULL 0
-        StrCpy $__DOTNET_2.0_FULL 0
-        StrCpy $__DOTNET_3.0_FULL 0
-        StrCpy $__DOTNET_3.5_FULL 0
-        StrCpy $__DOTNET_4.0_FULL 0
- 
-  !endif
-!macroend
- 
- 
-# lazy initialization macro
- 
-!macro __DotNetVer_InitVars
-    # only calculate version once
-    StrCmp $__DONTNET_FOUNDVER "" dotnetver.noveryet
-        Return
- 
-    dotnetver.noveryet:
-    !insertmacro __DotNetVer_DeclareVars
- 
-    Push $0    ;registry count
-    Push $1    ;registry key
-    Push $2    ;version number
-    Push $3    ;installed
-    Push $4    ;service pack number
-    Push $8    ;strLen helper var
- 
-    StrCpy $0 0
- 
-    dotnetver.startenum:
- 
-    EnumRegKey $1 HKLM "SOFTWARE\Microsoft\NET Framework Setup\NDP" $0
-    StrCmp $1 "" dotnetver.done
- 
-    IntOp $0 $0 + 1
- 
-    StrCpy $2 $1 1 0
-    StrCmp $2 "v" +1 dotnetver.startenum
-    StrCpy $2 $1 3 1
- 
-    ; Check for .NET 1.0 to 3.5
-    ReadRegDWORD $3 HKLM "SOFTWARE\Microsoft\NET Framework Setup\NDP\$1" "Install"
-    ReadRegDWORD $4 HKLM "SOFTWARE\Microsoft\NET Framework Setup\NDP\$1" "SP"
-    IntCmp $3 1 dotnetcheck.skipalt
-    ; Alternate check for versions that don't set the Install key
-    ReadRegDWORD $3 HKLM "SOFTWARE\Microsoft\NET Framework Setup\NDP\$1\Setup" "InstallSuccess"
-    dotnetcheck.skipalt:
-    ; This is a sanity check that works on .NET 1.0 to 3.5
-    ; if it fails check for dotnet 4
-    IntCmp $3 0 dotnetcheck.40
-    StrCmp $2 ${DOTNETVER_1_0} dotnetver.10
-    StrCmp $2 ${DOTNETVER_1_1} dotnetver.11
-    StrCmp $2 ${DOTNETVER_2_0} dotnetver.20
-    StrCmp $2 ${DOTNETVER_3_0} dotnetver.30
-    StrCmp $2 ${DOTNETVER_3_5} dotnetver.35
-    dotnetcheck.40:
-    StrCmp $2 ${DOTNETVER_4_0} dotnetver.40
-    StrCmp $2 "4" dotnetver.40
- 
-    Goto dotnetver.startenum
- 
-    dotnetver.10:
-        StrCpy $__DOTNET_1.0 1
-        StrCpy $__DOTNETVER_1.0_SP $4
-        StrCpy $__DOTNET_1.0_FULL 1
-        Goto dotnetver.startenum
-    dotnetver.11:
-        StrCpy $__DOTNET_1.1 1
-        StrCpy $__DOTNETVER_1.1_SP $4
-        StrCpy $__DOTNET_1.1_FULL 1
-        Goto dotnetver.startenum
-    dotnetver.20:
-        StrCpy $__DOTNET_2.0 1
-        StrCpy $__DOTNETVER_2.0_SP $4
-        StrCpy $__DOTNET_2.0_FULL 1
-        Goto dotnetver.startenum
-    dotnetver.30:
-        StrCpy $__DOTNET_3.0 1
-        StrCpy $__DOTNETVER_3.0_SP $4
-        StrCpy $__DOTNET_3.0_FULL 1
-        Goto dotnetver.startenum
-    dotnetver.35:
-        StrCpy $__DOTNET_3.5 1
-        StrCpy $__DOTNETVER_3.5_SP $4
-        StrCpy $__DOTNET_3.5_FULL 1
-        Goto dotnetver.startenum
-    dotnetver.40:
-        ; Check for .NET 4.0 (Full Profile)
-        ReadRegDWORD $3 HKLM "SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full" "Install"
-        ReadRegDWORD $4 HKLM "SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full" "SP"
-	StrLen $8 $3
-        IntCmp $8 0 dotnetcheck.40c
-        IntCmp $3 0 dotnetcheck.40c
-        StrCmp $2 ${DOTNETVER_4_0} dotnetver.40_Full
-        StrCmp $2 "4" dotnetver.40_Full
-        dotnetcheck.40c:
-        ; Check for .NET 4.0 (Client Profile)
-        ReadRegDWORD $3 HKLM "SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Client" "Install"
-        ReadRegDWORD $4 HKLM "SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Client" "SP"
-	StrLen $8 $3
-        IntCmp $8 0 dotnetver.startenum
-        IntCmp $3 0 dotnetver.startenum
-        StrCmp $2 ${DOTNETVER_4_0} dotnetver.40_Client
-        StrCmp $2 "4" dotnetver.40_Client
-        Goto dotnetver.startenum
-    dotnetver.40_Full:
-        StrCpy $__DOTNET_4.0 1
-        StrCpy $__DOTNETVER_4.0_SP $4
-        StrCpy $__DOTNET_4.0_FULL 1
-        Goto dotnetcheck.40c ; continue looking for other profiles
-    dotnetver.40_Client:
-        StrCpy $__DOTNET_4.0 1
-        StrCpy $__DOTNETVER_4.0_SP $4
-        StrCpy $__DOTNET_4.0_CLIENT 1
-        Goto dotnetver.startenum
- 
-    dotnetver.done:
- 
-    StrCpy $__DONTNET_FOUNDVER "1"
- 
-    Pop $8
-    Pop $4
-    Pop $3
-    Pop $2
-    Pop $1
-    Pop $0
-!macroend
- 
-!macro _HasDotNet _a _b _t _f
-    ${CallArtificialFunction} __DotNetVer_InitVars
- 
-   !insertmacro _= `$__DOTNET_${_b}` `1` `${_t}` `${_f}`
-!macroend
- 
-!macro __DotNetVer_DefineTest Ver
-  !define HasDotNet${Ver} `"" HasDotNet ${Ver}`
-!macroend
- 
-!insertmacro __DotNetVer_DefineTest ${DOTNETVER_1_0}
-!insertmacro __DotNetVer_DefineTest ${DOTNETVER_1_1}
-!insertmacro __DotNetVer_DefineTest ${DOTNETVER_2_0}
-!insertmacro __DotNetVer_DefineTest ${DOTNETVER_3_0}
-!insertmacro __DotNetVer_DefineTest ${DOTNETVER_3_5}
-!insertmacro __DotNetVer_DefineTest ${DOTNETVER_4_0}
- 
-!macro _AtLeastDotNetServicePack _a _b _t _f
-    ${CallArtificialFunction} __DotNetVer_InitVars
- 
-    !insertmacro _>= `$__DOTNETVER_${_a}_SP` `${_b}` `${_t}` `${_f}`
-!macroend
-!define AtLeastDotNetServicePack `AtLeastDotNetServicePack`
- 
- 
-!macro _AtMostDotNetServicePack _a _b _t _f
-    ${CallArtificialFunction} __DotNetVer_InitVars
- 
-    !insertmacro _<= `$__DOTNETVER_${_a}_SP` `${_b}` `${_t}` `${_f}`
-!macroend
-!define AtMostDotNetServicePack `AtMostDotNetServicePack`
- 
- 
-!macro _IsDotNetServicePack _a _b _t _f
-    ${CallArtificialFunction} __DotNetVer_InitVars
- 
-    !insertmacro _= `$__DOTNETVER_${_a}_SP` `${_b}` `${_t}` `${_f}`
-!macroend
-!define IsDotNetServicePack `IsDotNetServicePack`
- 
-!macro _HasDotNetClientProfile _a _b _t _f
-    ${CallArtificialFunction} __DotNetVer_InitVars
- 
-    !insertmacro _= `$__DOTNET_${_a}_CLIENT` `${_b}` `${_t}` `${_f}`
-!macroend
-!define HasDotNetClientProfile `HasDotNetClientProfile`
- 
-!macro _HasDotNetFullProfile _a _b _t _f
-    ${CallArtificialFunction} __DotNetVer_InitVars
- 
-    !insertmacro _= `$__DOTNET_${_a}_FULL` `${_b}` `${_t}` `${_f}`
-!macroend
-!define HasDotNetFullProfile `HasDotNetFullProfile`
- 
-# done
- 
-!endif # !___DOTNETVER__NSH___
- 
-!verbose pop

Old_Installer/Language/czech.nsi

@@ -1,22 +0,0 @@
-; Czech installer translation
-
-; Start mRemoteNG after installation
-LangString LaunchMremoteNow ${LANG_CZECH} "mRemoteNG run CZECH message"
-
-; Installer Language
-LangString InstallerLanguage ${LANG_CZECH} "Installer Language"
-
-; Select installer Language
-LangString SelectInstallerLanguage ${LANG_CZECH} "Please select the language of the installer"
-
-; Requires .NET Framework
-LangString RequiresNetFramework ${LANG_CZECH} "mRemoteNG requires Microsoft .NET Framework 3.0."
-
-; User needs to be Admin
-LangString RequiresAdminUser ${LANG_CZECH} "You must be a member of the 'Power Users' or 'Administrators' group to install mRemoteNG."
-
-; Start Menu items
-LangString CreditsLinkName ${LANG_CZECH} "Credits"
-LangString CopyingLinkName ${LANG_CZECH} "License"
-LangString UninstallLinkName ${LANG_CZECH} "Uninstall"
-LangString ChangeLogLinkName ${LANG_CZECH} "Version History"

Old_Installer/Language/dutch.nsi

@@ -1,22 +0,0 @@
-; Dutch installer translation
-
-; Start mRemoteNG after installation
-LangString LaunchMremoteNow ${LANG_DUTCH} "mRemoteNG run DUTCH message"
-
-; Installer Language
-LangString InstallerLanguage ${LANG_DUTCH} "Installer Language"
-
-; Select installer Language
-LangString SelectInstallerLanguage ${LANG_DUTCH} "Please select the language of the installer"
-
-; Requires .NET Framework
-LangString RequiresNetFramework ${LANG_DUTCH} "mRemoteNG requires Microsoft .NET Framework 3.0."
-
-; User needs to be Admin
-LangString RequiresAdminUser ${LANG_DUTCH} "You must be a member of the 'Power Users' or 'Administrators' group to install mRemoteNG."
-
-; Start Menu items
-LangString CreditsLinkName ${LANG_DUTCH} "Credits"
-LangString CopyingLinkName ${LANG_DUTCH} "License"
-LangString UninstallLinkName ${LANG_DUTCH} "Uninstall"
-LangString ChangeLogLinkName ${LANG_DUTCH} "Version History"

Old_Installer/Language/english.nsi

@@ -1,22 +0,0 @@
-; English installer translation
-
-; Start mRemoteNG after installation
-LangString LaunchMremoteNow ${LANG_ENGLISH} "Launch mRemoteNG Now"
-
-; Installer Language
-LangString InstallerLanguage ${LANG_ENGLISH} "Installer Language"
-
-; Select installer Language
-LangString SelectInstallerLanguage ${LANG_ENGLISH} "Please select the language of the installer"
-
-; Requires .NET Framework
-LangString RequiresNetFramework ${LANG_ENGLISH} "mRemoteNG requires Microsoft .NET Framework 3.0."
-
-; User needs to be Admin
-LangString RequiresAdminUser ${LANG_ENGLISH} "You must be a member of the 'Power Users' or 'Administrators' group to install mRemoteNG."
-
-; Start Menu items
-LangString CreditsLinkName ${LANG_ENGLISH} "Credits"
-LangString CopyingLinkName ${LANG_ENGLISH} "License"
-LangString UninstallLinkName ${LANG_ENGLISH} "Uninstall"
-LangString ChangeLogLinkName ${LANG_ENGLISH} "Version History"

Old_Installer/Language/french.nsi

@@ -1,22 +0,0 @@
-; French installer translation
-
-; Start mRemoteNG after installation
-LangString LaunchMremoteNow ${LANG_FRENCH} "mRemoteNG run FRENCH message"
-
-; Installer Language
-LangString InstallerLanguage ${LANG_FRENCH} "Installer Language"
-
-; Select installer Language
-LangString SelectInstallerLanguage ${LANG_FRENCH} "Please select the language of the installer"
-
-; Requires .NET Framework
-LangString RequiresNetFramework ${LANG_FRENCH} "mRemoteNG requires Microsoft .NET Framework 3.0."
-
-; User needs to be Admin
-LangString RequiresAdminUser ${LANG_FRENCH} "You must be a member of the 'Power Users' or 'Administrators' group to install mRemoteNG."
-
-; Start Menu items
-LangString CreditsLinkName ${LANG_FRENCH} "Credits"
-LangString CopyingLinkName ${LANG_FRENCH} "License"
-LangString UninstallLinkName ${LANG_FRENCH} "Uninstall"
-LangString ChangeLogLinkName ${LANG_FRENCH} "Version History"

Old_Installer/Language/german.nsi

@@ -1,22 +0,0 @@
-; German installer translation
-
-; Start mRemoteNG after installation
-LangString LaunchMremoteNow ${LANG_GERMAN} "mRemoteNG jetzt Starten"
-
-; Installer Language
-LangString InstallerLanguage ${LANG_GERMAN} "Installationsprogamm Sprache"
-
-; Select installer Language
-LangString SelectInstallerLanguage ${LANG_GERMAN} "Bitte w<>hlen Sie die Sprache f<>r das Installationsprogramm"
-
-; Requires .NET Framework
-LangString RequiresNetFramework ${LANG_GERMAN} "mRemoteNG ben<65>tigt das Microsoft .NET Framework 3.0."
-
-; User needs to be Admin
-LangString RequiresAdminUser ${LANG_GERMAN} "Sie m<>ssen Mitglied der Grupper 'Power Users' or 'Administratoren' sein, damit Sie mRemoteNG installieren k<>nnen."
-
-; Start Menu items
-LangString CreditsLinkName ${LANG_GERMAN} "Credits"
-LangString CopyingLinkName ${LANG_GERMAN} "License"
-LangString UninstallLinkName ${LANG_GERMAN} "Uninstall"
-LangString ChangeLogLinkName ${LANG_GERMAN} "Version History"

Old_Installer/Language/languages.nsi

@@ -1,31 +0,0 @@
-!define LanguageNameEnglish "English"
-!insertmacro MUI_LANGUAGE "English"
-!include "Language\english.nsi"
-
-!define LanguageNameCzech "Čeština"
-!insertmacro MUI_LANGUAGE "Czech"
-!include "Language\czech.nsi"
-
-!define LanguageNameGerman "Deutsch"
-!insertmacro MUI_LANGUAGE "German"
-!include "Language\german.nsi"
-
-!define LanguageNameSpanish "Español"
-!insertmacro MUI_LANGUAGE "Spanish"
-!include "Language\spanish.nsi"
-
-!define LanguageNameFrench "Français"
-!insertmacro MUI_LANGUAGE "French"
-!include "Language\french.nsi"
-
-!define LanguageNameDutch "Nederlands"
-!insertmacro MUI_LANGUAGE "Dutch"
-!include "Language\dutch.nsi"
-
-!define LanguageNamePolish "Polski"
-!insertmacro MUI_LANGUAGE "Polish"
-!include "Language\polish.nsi"
-
-!define LanguageNameThai "ภาษาไทย"
-!insertmacro MUI_LANGUAGE "Thai"
-!include "Language\thai.nsi"

Old_Installer/Language/polish.nsi

@@ -1,22 +0,0 @@
-; Polish installer translation
-
-; Start mRemoteNG after installation
-LangString LaunchMremoteNow ${LANG_POLISH} "mRemoteNG run POLISH message"
-
-; Installer Language
-LangString InstallerLanguage ${LANG_POLISH} "Installer Language"
-
-; Select installer Language
-LangString SelectInstallerLanguage ${LANG_POLISH} "Please select the language of the installer"
-
-; Requires .NET Framework
-LangString RequiresNetFramework ${LANG_POLISH} "mRemoteNG requires Microsoft .NET Framework 3.0."
-
-; User needs to be Admin
-LangString RequiresAdminUser ${LANG_POLISH} "You must be a member of the 'Power Users' or 'Administrators' group to install mRemoteNG."
-
-; Start Menu items
-LangString CreditsLinkName ${LANG_POLISH} "Credits"
-LangString CopyingLinkName ${LANG_POLISH} "License"
-LangString UninstallLinkName ${LANG_POLISH} "Uninstall"
-LangString ChangeLogLinkName ${LANG_POLISH} "Version History"

Old_Installer/Language/spanish.nsi

@@ -1,22 +0,0 @@
-; Spanish installer translation
-
-; Start mRemoteNG after installation
-LangString LaunchMremoteNow ${LANG_SPANISH} "Iniciando de mRemoteNG"
-
-; Installer Language
-LangString InstallerLanguage ${LANG_SPANISH} "Lenguaje de Instalación"
-
-; Select installer Language
-LangString SelectInstallerLanguage ${LANG_SPANISH} "Seleccione el lenguaje de instalación"
-
-; Requires .NET Framework
-LangString RequiresNetFramework ${LANG_SPANISH} "mRemoteNG requiere Microsoft .NET Framework 3.0."
-
-; User needs to be Admin
-LangString RequiresAdminUser ${LANG_SPANISH} "Debe ser miembro del grupo 'Administradores' para poder instalar mRemoteNG."
-
-; Start Menu items
-LangString CreditsLinkName ${LANG_SPANISH} "Créditos"
-LangString CopyingLinkName ${LANG_SPANISH} "Licencia"
-LangString UninstallLinkName ${LANG_SPANISH} "Desinstalar"
-LangString ChangeLogLinkName ${LANG_SPANISH} "Historial de Versiones"

Old_Installer/Language/thai.nsi

@@ -1,23 +0,0 @@
-; Thai installer translation
-; Contributed by Apisitt Rattana
-
-; Start mRemoteNG after installation
-LangString LaunchMremoteNow ${LANG_THAI} "ขณะนี้กำลังติดตั้ง mRemoteNG"
-
-; Installer Language
-LangString InstallerLanguage ${LANG_THAI} "ภาษาสำหรับการติดตั้ง"
-
-; Select installer Language
-LangString SelectInstallerLanguage ${LANG_THAI} "กรุณาเลือกภาษาสำหรับการติดตั้ง"
-
-; Requires .NET Framework
-LangString RequiresNetFramework ${LANG_THAI} "mRemoteNG มีความต้องการ  Microsoft .NET Framework 3.0. เป็นพื้นฐาน"
-
-; User needs to be Admin
-LangString RequiresAdminUser ${LANG_THAI} "คุณต้องเป็นสมาชิกในกลุ่มของ 'Power Users' หรือ 'Administrators' เพื่อการติดตั้ง mRemoteNG"
-
-; Start Menu items
-LangString CreditsLinkName ${LANG_THAI} "Credits"
-LangString CopyingLinkName ${LANG_THAI} "License"
-LangString UninstallLinkName ${LANG_THAI} "Uninstall"
-LangString ChangeLogLinkName ${LANG_THAI} "Version History"

Old_Installer/mRemote.nsi

@@ -1,197 +0,0 @@
-!include "MUI.nsh"
-!include "WordFunc.nsh"
-!insertmacro VersionCompare
-
-!include "DotNetVer.nsh"
-!include "..\Release\Version.nsh"
-
-; This will be passed in using the /D switch by BUILD.CMD
-!ifdef PRODUCT_VERSION_TAG
-	!define PRODUCT_VERSION_FRIENDLY "${PRODUCT_VERSION_SHORT}"
-	!define PRODUCT_VERSION_TAGGED "${PRODUCT_VERSION_SHORT}-${PRODUCT_VERSION_TAG}"
-!else
-	!define PRODUCT_VERSION_FRIENDLY "${PRODUCT_VERSION_SHORT}"
-	!define PRODUCT_VERSION_TAGGED "${PRODUCT_VERSION_SHORT}"
-!endif
-
-; Basic Config
-Name "mRemoteNG ${PRODUCT_VERSION_FRIENDLY}"
-OutFile "..\Release\mRemoteNG-Installer-${PRODUCT_VERSION_TAGGED}.exe"
-SetCompressor /SOLID lzma
-InstallDir "$PROGRAMFILES\mRemoteNG"
-InstallDirRegKey HKLM "Software\mRemoteNG" "InstallPath"
-RequestExecutionLevel admin
-
-; Version Information
-VIProductVersion ${PRODUCT_VERSION}
-VIAddVersionKey "CompanyName" "Next Generation Software"
-VIAddVersionKey "ProductName" "mRemoteNG"
-VIAddVersionKey "ProductVersion" ${PRODUCT_VERSION}
-VIAddVersionKey "LegalCopyright" "Copyright © 2007-2009 Felix Deimel, 2010-2013 Riley McArdle"
-VIAddVersionKey "FileDescription" "mRemoteNG ${PRODUCT_VERSION_FRIENDLY} Installer"
-VIAddVersionKey "FileVersion" ${PRODUCT_VERSION}
-
-; Design
-!define MUI_ICON "Setup_Install.ico"
-!define MUI_UNICON "RecycleBin.ico"
-!define MUI_HEADERIMAGE
-!define MUI_HEADERIMAGE_BITMAP "header.bmp" ; optional
-!define MUI_HEADERIMAGE_BITMAP_NOSTRETCH
-!define MUI_HEADERIMAGE_UNBITMAP "header.bmp" ; optional
-!define MUI_HEADERIMAGE_UNBITMAP_NOSTRETCH
-!define MUI_HEADER_TRANSPARENT_TEXT
-!define MUI_WELCOMEFINISHPAGE_BITMAP "welcomefinish.bmp"
-!define MUI_WELCOMEFINISHPAGE_BITMAP_NOSTRETCH
-!define MUI_UNWELCOMEFINISHPAGE_BITMAP "welcomefinish.bmp"
-!define MUI_UNWELCOMEFINISHPAGE_BITMAP_NOSTRETCH
-
-; Install Pages
-!insertmacro MUI_PAGE_LICENSE "..\COPYING.TXT"
-!insertmacro MUI_PAGE_DIRECTORY
-!insertmacro MUI_PAGE_INSTFILES
-!define MUI_FINISHPAGE_NOAUTOCLOSE
-
-; Finish Page
-!define MUI_FINISHPAGE_RUN_NOTCHECKED
-!define MUI_FINISHPAGE_RUN "$INSTDIR\mRemoteNG.exe"
-!insertmacro MUI_PAGE_FINISH
-
-; Uninstall Pages
-!insertmacro MUI_UNPAGE_CONFIRM
-!insertmacro MUI_UNPAGE_INSTFILES
-
-; Get Languages
-!include "Language\languages.nsi"
-
-; Set finish page text
-!define MUI_FINISHPAGE_RUN_Text "$(LaunchMremoteNow)"
-
-Function .onInit
-	ClearErrors
-	UserInfo::GetName
-	IfErrors Win9x
-	Pop $0
-	UserInfo::GetAccountType
-	Pop $1
-	# GetOriginalAccountType will check the tokens of the original user of the
-	# current thread/process. If the user tokens were elevated or limited for
-	# this process, GetOriginalAccountType will return the non-restricted
-	# account type.
-	# On Vista with UAC, for example, this is not the same value when running
-	# with `RequestExecutionLevel user`. GetOriginalAccountType will return
-	# "admin" while GetAccountType will return "user".
-	StrCmp $1 "Admin" 0 +3
-		Goto doit
-	StrCmp $1 "Power" 0 +3
-		Goto doit
-	StrCmp $1 "User" 0 +3
-		Goto noop
-	StrCmp $1 "Guest" 0 +3
-		Goto noop
-	MessageBox MB_OK "Unknown error"
-	Goto doit
-
-	Win9x:
-	doit:
-		# We can install
-		IfSilent +2
-			Call SelectLanguage
-		Goto end
-	noop:
-		MessageBox MB_OK "$(RequiresAdminUser)"
-		Quit
-	end:
-FunctionEnd
-
-Function SelectLanguage
-	;Language selection dialog
-	Push ""
-	Push ${LANG_ENGLISH}
-	Push ${LanguageNameEnglish}
-	Push ${LANG_GERMAN}
-	Push ${LanguageNameGerman}
-	Push ${LANG_DUTCH}
-	Push ${LanguageNameDutch}
-	Push ${LANG_FRENCH}
-	Push ${LanguageNameFrench}
-	Push ${LANG_POLISH}
-	Push ${LanguageNamePolish}
-	Push ${LANG_SPANISH}
-	Push ${LanguageNameSpanish}
-	Push ${LANG_CZECH}
-	Push ${LanguageNameCzech}
-	Push ${LANG_THAI}
-	Push ${LanguageNameThai}
-	Push A ; A means auto count languages
-	       ; for the auto count to work the first empty push (Push "") must remain
-	LangDLL::LangDialog  "$(InstallerLanguage)" "$(SelectInstallerLanguage)"
-
-	Pop $LANGUAGE
-	StrCmp $LANGUAGE "cancel" 0 +2
-		Abort
-
-	; Check .NET version
-	${IfNot} ${HasDotNet3.0}
-		MessageBox MB_OK|MB_ICONEXCLAMATION "$(RequiresNetFramework)"
-		Quit
-	${EndIf}
-FunctionEnd
-
-Section "" ; Install
-	SetOutPath $INSTDIR
-	SetShellVarContext all
-	
-	; AddFiles
-	File /r /x "mRemoteNG.vshost.*" "..\mRemoteV1\bin\Release\*.*"
-	File /r "Dependencies\*.*"
-	File "..\*.txt"
-
-	; Uninstaller
-	WriteUninstaller "$INSTDIR\Uninstall.exe"
-
-	; Register ActiveX components
-	RegDLL "$INSTDIR\eolwtscom.dll"
- 
-	; Start Menu
-	CreateDirectory "$SMPROGRAMS\mRemoteNG"
-	CreateShortCut "$SMPROGRAMS\mRemoteNG\$(CreditsLinkName).lnk" "$INSTDIR\CREDITS.TXT"
-	CreateShortCut "$SMPROGRAMS\mRemoteNG\$(CopyingLinkName).lnk" "$INSTDIR\COPYING.TXT"
-	CreateShortCut "$SMPROGRAMS\mRemoteNG\mRemoteNG.lnk" "$INSTDIR\mRemoteNG.exe"
-	CreateShortCut "$SMPROGRAMS\mRemoteNG\$(UninstallLinkName).lnk" "$INSTDIR\Uninstall.exe"
-	CreateShortCut "$SMPROGRAMS\mRemoteNG\$(ChangeLogLinkName).lnk" "$INSTDIR\CHANGELOG.TXT"
-
-	; Registry
-	WriteRegStr HKLM "Software\mRemoteNG" "InstallPath" $INSTDIR
-	WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\mRemoteNG" "DisplayName" "mRemoteNG"
-	WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\mRemoteNG" "Publisher" "Next Generation Software"
-	WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\mRemoteNG" "DisplayIcon" "$INSTDIR\mRemoteNG.exe"
-	WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\mRemoteNG" "EstimatedSize" 7080
-
-	WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\mRemoteNG" "DisplayVersion" ${PRODUCT_VERSION}
-	WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\mRemoteNG" "VersionMajor" ${PRODUCT_VERSION_MAJOR}
-	WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\mRemoteNG" "VersionMinor" ${PRODUCT_VERSION_MINOR}
-
-	WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\mRemoteNG" "UninstallString" '"$INSTDIR\Uninstall.exe"'
-	WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\mRemoteNG" "NoModify" 1
-	WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\mRemoteNG" "NoRepair" 1
-SectionEnd
-
-Section "un.Uninstall"
-	; Unregister ActiveX components
-	UnregDLL "$INSTDIR\eolwtscom.dll"
-
-	; Delete Files
-	RMDIR /r $INSTDIR
-
-	; Start Menu
-	SetShellVarContext all
-	RMDir /r "$SMPROGRAMS\mRemoteNG"
-	SetShellVarContext current
-	RMDir /r "$SMPROGRAMS\mRemoteNG"
-
-	; Registry
-	DeleteRegValue HKLM "Software\mRemoteNG" "InstallPath"
-	DeleteRegKey /ifempty HKLM "Software\mRemoteNG"
-	DeleteRegKey /ifempty HKCU "Software\mRemoteNG"
-	DeleteRegKey HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\mRemoteNG"
-SectionEnd

README.MD

@@ -1,31 +1,57 @@
+# Welcome to the mRemoteNG project!
+
 [![Twitter Follow](https://img.shields.io/twitter/follow/mRemoteNG.svg?style=social&label=Follow)](https://twitter.com/intent/follow?screen_name=mRemoteNG)
+[![Join the chat at https://gitter.im/mRemoteNG/PublicChat/](https://badges.gitter.im/Join%20Chat.svg)](https://gitter.im/mRemoteNG/PublicChat)
+[![PayPal](https://img.shields.io/badge/%24-PayPal-blue.svg)](https://www.paypal.me/DavidSparer)
 
-[![Build Status](http://ec2-52-39-111-114.us-west-2.compute.amazonaws.com:8080/buildStatus/icon?job=mRemoteNG/mRemoteNG/develop)](http://ec2-52-39-111-114.us-west-2.compute.amazonaws.com:8080/job/mRemoteNG/job/mRemoteNG/job/develop/)
-[![Github Releases (by Release)](https://img.shields.io/github/downloads/mRemoteNG/mRemoteNG/v1.74/total.svg)](https://github.com/mRemoteNG/mRemoteNG/releases/tag/v1.74)
+[![Github Releases](https://img.shields.io/github/downloads/mRemoteNG/mRemoteNG/total.svg?style=flat-square)](https://github.com/mRemoteNG/mRemoteNG/releases/)
 
+[![CII Best Practices](https://bestpractices.coreinfrastructure.org/projects/529/badge)](https://bestpractices.coreinfrastructure.org/projects/529)
+[![Documentation Status](https://readthedocs.org/projects/mremoteng/badge/?version=latest)](https://mremoteng.readthedocs.io/en/latest/?badge=latest)
+
+| Update Channel | Build Status | Downloads |
+| ---------------|--------------|-----------|
+| Stable | [![Build status](https://ci.appveyor.com/api/projects/status/k0sdbxmq90fgdmj6/branch/master?svg=true)](https://ci.appveyor.com/project/mremoteng/mremoteng/branch/master) | [![Github Releases (by Release)](https://img.shields.io/github/downloads/mRemoteNG/mRemoteNG/v1.76.15/total.svg)](https://github.com/mRemoteNG/mRemoteNG/releases/tag/v1.76.15) |
+| Beta | | [![Github Releases (by Release)](https://img.shields.io/github/downloads/mRemoteNG/mRemoteNG/v1.76.15/total.svg)](https://github.com/mRemoteNG/mRemoteNG/releases/tag/v1.76.15) |
+| Development | [![Build status](https://ci.appveyor.com/api/projects/status/k0sdbxmq90fgdmj6/branch/develop?svg=true)](https://ci.appveyor.com/project/mremoteng/mremoteng/branch/develop) | [![Github Releases (by Release)](https://img.shields.io/github/downloads/mRemoteNG/mRemoteNG/v1.76.15/total.svg)](https://github.com/mRemoteNG/mRemoteNG/releases/tag/v1.76.15) |
 
 mRemoteNG is the next generation of mRemote, a full-featured, multi-tab remote connections manager.
 
-It allows you to store all your remote connections in a simple yet powerful interface.
+## Features
 
-Currently these protocols are supported:
+mRemoteNG is a fork of mRemote: an open source, tabbed, multi-protocol, remote connections manager. mRemoteNG adds bug fixes and new features to mRemote.
 
- * RDP (Remote Desktop)
- * VNC (Virtual Network Computing)
- * ICA (Independent Computing Architecture)
- * SSH (Secure Shell)
- * Telnet (TELecommunication NETwork)
- * HTTP/S (Hypertext Transfer Protocol)
- * Rlogin (Rlogin)
- * RAW
+It allows you to view all of your remote connections in a simple yet powerful tabbed interface.
 
-mRemoteNG can be installed on Windows 7 or later.
+mRemoteNG supports the following protocols:
 
-Windows 7 systems require RDP version 8:   
-https://support.microsoft.com/en-us/kb/2592687   
-OR   
-https://support.microsoft.com/en-us/kb/2923545   
+* RDP (Remote Desktop/Terminal Server)
+* VNC (Virtual Network Computing)
+* ICA (Citrix Independent Computing Architecture)
+* SSH (Secure Shell)
+* Telnet (TELecommunication NETwork)
+* HTTP/HTTPS (Hypertext Transfer Protocol)
+* rlogin (Remote Login)
+* Raw Socket Connections
 
-Windows 8+ support RDP version 8+ out of the box.
+For a detailed feature list and general usage support, refer to the [User Manual](https://github.com/mRemoteNG/mRemoteNG/wiki/User-Manual).
 
-RDP versions are backwards compatible, so an mRemoteNG client running on Windows 10 can connection successfully to a Windows 2003 host (for example).
+## Installation
+
+mRemoteNG is supported on Windows 7 or later. Before installing make sure you fullfill all the [minimum requirements](https://mremoteng.readthedocs.io/en/latest/installation/minimum_requirements.html).
+
+mRemoteNG is available as a redistributable msi package, and can be downloaded from the following locations:
+* [GitHub](https://github.com/mRemoteNG/mRemoteNG/releases)
+* [Project Website](https://mremoteng.org/download)
+
+## Contribute
+
+If you find mRemoteNG useful and would like to contribute, it would be greatly appreciated. When you contribute, you make it possible for the team to cover the costs of producing mRemoteNG.
+
+### Submit Code
+Check out the [Wiki page](https://github.com/mRemoteNG/mRemoteNG/wiki) on how to configure your development environment and submit a pull request.
+
+### Translate
+Check out the [Wiki page](https://github.com/mRemoteNG/mRemoteNG/wiki) on how to help make mRemoteNG a polyglot
+
+[![Developed with ReSharper](https://raw.githubusercontent.com/mRemoteNG/mRemoteNG/develop/.github/icon_ReSharper.png)](https://www.jetbrains.com/resharper/)

Readme.txt

@@ -1,25 +0,0 @@
-mRemoteNG is the next generation of mRemote, a full-featured, multi-tab remote connections manager.
-
-It allows you to store all your remote connections in a simple yet powerful interface.
-
-Currently these protocols are supported:
-
- * RDP (Remote Desktop)
- * VNC (Virtual Network Computing)
- * ICA (Independent Computing Architecture)
- * SSH (Secure Shell)
- * Telnet (TELecommunication NETwork)
- * HTTP/S (Hypertext Transfer Protocol)
- * Rlogin (Rlogin)
- * RAW
-
-mRemoteNG can be installed on Windows 7 or later.
-
-Windows 7 systems require RDP version 8:   
-https://support.microsoft.com/en-us/kb/2592687   
-OR   
-https://support.microsoft.com/en-us/kb/2923545   
-
-Windows 8+ support RDP version 8+ out of the box.
-
-RDP versions are backwards compatible, so an mRemoteNG client running on Windows 10 can connection successfully to a Windows 2003 host (for example).

Tools/7zip/License.txt

@@ -3,7 +3,7 @@
       License for use and distribution
       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-      Copyright (C) 1999-2016 Igor Pavlov.
+      Copyright (C) 1999-2018 Igor Pavlov.
 
       7-Zip Extra files are under the GNU LGPL license.
 

Tools/7zip/history.txt

@@ -1,6 +1,25 @@
 7-Zip Extra history
 -------------------
 
+This file contains only information about changes related to that package exclusively.
+The full history of changes is listed in history.txt in main 7-Zip program.
+
+
+18.05          2018-04-30
+-------------------------
+- The speed for LZMA/LZMA2 compressing was increased 
+    by 8% for fastest/fast compression levels and 
+    by 3% for normal/maximum compression levels.
+
+
+18.03 beta     2018-03-04
+-------------------------
+- The speed for single-thread LZMA/LZMA2 decoding
+  was increased  by 30% in x64 version and by 3% in x86 version.
+- 7-Zip now can use multi-threading for 7z/LZMA2 decoding,
+  if there are multiple independent data chunks in LZMA2 stream.
+
+
 9.35 beta           2014-12-07
 ------------------------------
   - SFX modules were moved to LZMA SDK package.

Tools/7zip/readme.txt

@@ -1,9 +1,9 @@
-7-Zip Extra 16.02
+7-Zip Extra 18.05
 -----------------
 
 7-Zip Extra is package of extra modules of 7-Zip. 
 
-7-Zip Copyright (C) 1999-2016 Igor Pavlov.
+7-Zip Copyright (C) 1999-2018 Igor Pavlov.
 
 7-Zip is free software. Read License.txt for more information about license.
 

Tools/CreateBulkConnections_ConfCons2_6.ps1

@@ -0,0 +1,294 @@
+#####################################
+# Authors: David Sparer & Jack Denton
+# Summary:
+#   This is intended to be a template for creating connections in bulk. This uses the serializers directly from the mRemoteNG binaries.
+#   You will still need to create the connection info objects, but the library will handle serialization. It is expected that you
+#   are familiar with PowerShell. If this is not the case, reach out to the mRemoteNG community for help.
+# Usage:
+#   Replace or modify the examples that are shown toward the end of the script to create your own connection info objects.
+#####################################
+
+foreach ($Path in 'HKLM:\SOFTWARE\WOW6432Node\mRemoteNG', 'HKLM:\SOFTWARE\mRemoteNG') {
+    Try {
+        $mRNGPath = (Get-ItemProperty -Path $Path -Name InstallDir -ErrorAction Stop).InstallDir
+        break
+    }
+    Catch {
+        continue
+    }
+}
+if (!$mRNGPath) {
+    Add-Type -AssemblyName System.Windows.Forms
+    $FolderBrowser = [System.Windows.Forms.FolderBrowserDialog]@{
+        Description         = 'Please select the folder which contains mRemoteNG.exe'
+        ShowNewFolderButton = $false
+    }
+    
+    $Response = $FolderBrowser.ShowDialog()
+    
+    if ($Response.value__ -eq 1) {
+        $mRNGPath = $FolderBrowser.SelectedPath
+    }
+    elseif ($Response.value__ -eq 2) {
+        Write-Warning 'A folder containing mRemoteNG.exe has not been selected'
+        return
+    }
+}
+$null = [System.Reflection.Assembly]::LoadFile((Join-Path -Path $mRNGPath -ChildPath "mRemoteNG.exe"))
+Add-Type -Path (Join-Path -Path $mRNGPath -ChildPath "BouncyCastle.Crypto.dll")
+
+
+
+function ConvertTo-mRNGSerializedXml {
+    [CmdletBinding()]
+    Param (
+        [Parameter(Mandatory)]
+        [mRemoteNG.Connection.ConnectionInfo[]]
+        $Xml
+)
+
+    function Get-ChildNodes {
+        Param ($Xml)
+
+        $Xml
+
+        if ($Xml -is [mRemoteNG.Container.ContainerInfo] -and $Xml.HasChildren()) {
+            foreach ($Node in $Xml.Children) {
+                Get-ChildNodes -Xml $Node
+            }
+        }
+    }
+
+    $AllNodes = Get-ChildNodes -Xml $Xml
+    if (
+        $AllNodes.Password -or
+        $AllNodes.RDGatewayPassword -or
+        $AllNodes.VNCProxyPassword
+    ) {
+        $Password = Read-Host -Message 'If you have password protected your ConfCons.xml please enter the password here otherwise just press enter' -AsSecureString
+    }
+    else {
+        $Password = [securestring]::new()
+    }
+    $CryptoProvider = [mRemoteNG.Security.SymmetricEncryption.AeadCryptographyProvider]::new()
+    $SaveFilter = [mRemoteNG.Security.SaveFilter]::new()
+    $ConnectionNodeSerializer = [mRemoteNG.Config.Serializers.Xml.XmlConnectionNodeSerializer26]::new($CryptoProvider, $Password, $SaveFilter)
+    $XmlSerializer = [mRemoteNG.Config.Serializers.Xml.XmlConnectionsSerializer]::new($CryptoProvider, $ConnectionNodeSerializer)
+
+    $RootNode = [mRemoteNG.Tree.Root.RootNodeInfo]::new('Connection')
+    foreach ($Node in $Xml) {
+        $RootNode.AddChild($Node)
+    }
+    $XmlSerializer.Serialize($RootNode)
+}
+
+function New-mRNGConnection {
+    [CmdletBinding(DefaultParameterSetName = 'Credential')]
+    Param (
+        [Parameter(Mandatory)]
+        [string]
+        $Name,
+
+        [Parameter(Mandatory)]
+        [string]
+        $Hostname,
+
+        [Parameter(Mandatory)]
+        [mRemoteNG.Connection.Protocol.ProtocolType]
+        $Protocol,
+
+        [Parameter(ParameterSetName = 'Credential')]
+        [pscredential]
+        $Credential,
+
+        [Parameter(ParameterSetName = 'InheritCredential')]
+        [switch]
+        $InheritCredential,
+
+        [Parameter()]
+        [mRemoteNG.Container.ContainerInfo]
+        $ParentContainer,
+
+        [Parameter()]
+        [switch]
+        $PassThru
+    )
+
+    $Connection = [mRemoteNG.Connection.ConnectionInfo]@{
+        Name     = $Name
+        Hostname = $Hostname
+        Protocol = $Protocol
+    }
+
+    if ($Credential) {
+        $Connection.Username = $Credential.GetNetworkCredential().UserName
+        $Connection.Domain = $Credential.GetNetworkCredential().Domain
+        $Connection.Password = $Credential.GetNetworkCredential().Password
+    }
+
+    if ($InheritCredential) {
+        $Connection.Inheritance.Username = $true
+        $Connection.Inheritance.Domain = $true
+        $Connection.Inheritance.Password = $true
+    }
+
+    if ($ParentContainer) {
+        $ParentContainer.AddChild($Connection)
+
+        if ($PSBoundParameters.ContainsKey('PassThru')) {
+            $Connection
+        }
+    }
+    else {
+        $Connection
+    }
+}
+
+function New-mRNGContainer {
+    [CmdletBinding(DefaultParameterSetName = 'Credential')]
+    Param (
+        [Parameter(Mandatory)]
+        [string]
+        $Name,
+
+        [Parameter(ParameterSetName = 'Credential')]
+        [pscredential]
+        $Credential,
+
+        [Parameter(ParameterSetName = 'InheritCredential')]
+        [switch]
+        $InheritCredential,
+
+        [Parameter()]
+        [mRemoteNG.Container.ContainerInfo]
+        $ParentContainer
+    )
+
+    $Container = [mRemoteNG.Container.ContainerInfo]@{
+        Name = $Name
+    }
+
+    if ($Credential) {
+        $Container.Username = $Credential.GetNetworkCredential().UserName
+        $Container.Domain = $Credential.GetNetworkCredential().Domain
+        $Container.Password = $Credential.GetNetworkCredential().Password
+    }
+
+    if ($InheritCredential) {
+        $Container.Inheritance.Username = $true
+        $Container.Inheritance.Domain = $true
+        $Container.Inheritance.Password = $true
+    }
+
+    if ($ParentContainer) {
+        $ParentContainer.AddChild($Container)
+    }
+    
+    $Container
+}
+
+function Export-mRNGXml {
+    [CmdletBinding()]
+    param (
+        [Parameter()]
+        [string]
+        $Path,
+
+        [Parameter()]
+        [string]
+        $SerializedXml
+    )
+
+    $FilePathProvider = [mRemoteNG.Config.DataProviders.FileDataProvider]::new($Path)
+    $filePathProvider.Save($SerializedXml)
+}
+
+
+
+
+#----------------------------------------------------------------
+# Example 1: serialize many connections, no containers
+# Here you can define the number of connection info objects to create
+# You can also provide a list of desired hostnames and iterate over those
+
+$Connections = foreach ($i in 1..5) {
+    # Create new connection
+    $Splat = @{
+        Name              = 'Server-{0:D2}' -f $i
+        Hostname          = 'Server-{0:D2}' -f $i
+        Protocol          = 'RDP'
+        InheritCredential = $true
+    }
+    New-mRNGConnection @Splat
+}
+
+# Serialize the connections
+$SerializedXml = ConvertTo-mRNGSerializedXml -Xml $Connections
+
+# Write the XML to a file ready to import into mRemoteNG
+Export-mRNGXml -Path "$ENV:APPDATA\mRemoteNG\PowerShellGenerated.xml" -SerializedXml $SerializedXml
+
+# Now open up mRemoteNG and press Ctrl+O and open up the exported XML file
+
+
+
+
+#----------------------------------------------------------------
+# Example 2: serialize a container which has connections
+# You can also create containers and add connections and containers to them, which will be nested correctly when serialized
+# If you specify the ParentContainer parameter for new connections then there will be no output unless the PassThru parameter is also used
+
+$ProdServerCreds = Get-Credential
+$ProdServers = New-mRNGContainer -Name 'ProdServers' -Credential $ProdServerCreds
+
+foreach ($i in 1..3) {
+    # Create new connection
+    $Splat = @{
+        Name              = 'Server-{0:D2}' -f $i
+        Hostname          = 'Server-{0:D2}' -f $i
+        Protocol          = 'RDP'
+        InheritCredential = $true
+        ParentContainer   = $ProdServers
+    }
+    New-mRNGConnection @Splat
+}
+
+$ProdWebServers = New-mRNGContainer -Name 'WebServers' -ParentContainer $ProdServers -InheritCredential
+
+foreach ($i in 1..3) {
+    # Create new connection
+    $Splat = @{
+        Name              = 'WebServer-{0:D2}' -f $i
+        Hostname          = 'WebServer-{0:D2}' -f $i
+        Protocol          = 'SSH1'
+        InheritCredential = $true
+        ParentContainer   = $ProdWebServers
+    }
+    New-mRNGConnection @Splat
+}
+
+$DevServers = New-mRNGContainer -Name 'DevServers'
+
+foreach ($i in 1..3) {
+    # Create new connection
+    $Splat = @{
+        Name              = 'DevServer-{0:D2}' -f $i
+        Hostname          = 'DevServer-{0:D2}' -f $i
+        Protocol          = 'RDP'
+        InheritCredential = $true
+        ParentContainer   = $DevServers
+        PassThru          = $true
+    }
+
+    # Specified the PassThru parameter in order to catch the connection and change a property
+    $Connection = New-mRNGConnection @Splat
+    $Connection.Resolution = 'FullScreen'
+}
+
+# Serialize the container
+$SerializedXml = ConvertTo-mRNGSerializedXml -Xml $ProdServers, $DevServers
+
+# Write the XML to a file ready to import into mRemoteNG
+Export-mRNGXml -Path "$ENV:APPDATA\mRemoteNG\PowerShellGenerated.xml" -SerializedXml $SerializedXml
+
+# Now open up mRemoteNG and press Ctrl+O and open up the exported XML file

Tools/appveyor_after_build.ps1

@@ -0,0 +1,73 @@
+if([string]::IsNullOrEmpty($Env:APPVEYOR_BUILD_FOLDER)) {
+    Write-Output "NOT running via Appveyor - Exiting"
+    Exit
+}
+
+$appvDir = $Env:APPVEYOR_BUILD_FOLDER
+
+Write-Output "Appveyor Build Dir: '$($appvDir)'"
+$ConfigurationName = $Env:CONFIGURATION.Trim()
+Write-Output "Config Name (tirmmed): '$($ConfigurationName)'"
+
+
+$SIGCHECK="Tools\exes\sigcheck.exe"
+$SEVENZIP="Tools\7zip\7za.exe"
+
+if ($ConfigurationName -eq "Release Portable") {
+    Write-Output "Packaging Release Portable ZIP"
+   
+    $version = & $SIGCHECK /accepteula -q -n "mRemoteV1\bin\$($ConfigurationName)\mRemoteNG.exe"
+
+    Write-Output "Version is $($version)"
+
+    $PortableZip="Release\mRemoteNG-Portable-$($version).zip"
+
+    Remove-Item -Recurse "mRemoteV1\bin\package" -ErrorAction SilentlyContinue | Out-Null
+    New-Item "mRemoteV1\bin\package" -ItemType  "directory" | Out-Null
+    
+    Copy-Item "mRemoteV1\Resources\PuTTYNG.exe" -Destination "mRemoteV1\bin\package"
+
+    Copy-Item "mRemoteV1\bin\$ConfigurationName\*" -Destination "mRemoteV1\bin\package" -Recurse -Force -Exclude *.pdb
+    Copy-Item "*.txt" -Destination "mRemoteV1\bin\package"
+
+    Write-Output "Creating portable ZIP file $($PortableZip)"
+    Remove-Item -Force  $PortableZip -ErrorAction SilentlyContinue
+    & $SEVENZIP a -bt -bd -bb1 -mx=9 -tzip -y -r $PortableZip ".\mRemoteV1\bin\package\*.*"
+}
+else {
+    Write-Output "We will not zip anything - this isnt a portable release build."
+}
+
+Write-Output ""
+Write-Output ""
+
+if ($ConfigurationName -match "Release" -And $ConfigurationName -ne "Release Installer") {
+    Write-Output "Packaging debug symbols"
+   
+    $version = & $SIGCHECK /accepteula -q -n "mRemoteV1\bin\$($ConfigurationName)\mRemoteNG.exe"
+
+    Write-Output "Version is $($version)"
+
+    if ($ConfigurationName -match "Portable") {
+        $zipFilePrefix = "mRemoteNG-Portable-symbols"
+    } else {
+        $zipFilePrefix = "mRemoteNG-symbols"
+    }
+
+    $outputZipPath="Release\$zipFilePrefix-$($version).zip"
+
+    Write-Output "Creating debug symbols ZIP file $($outputZipPath)"
+    Remove-Item -Force  $outputZipPath -ErrorAction SilentlyContinue
+    $SymPath = (Join-Path -Path mRemoteV1\bin\$($ConfigurationName) -ChildPath "*.pdb")
+    if(Test-Path "$SymPath") {
+    	& $SEVENZIP a -bt -bd -bb1 -mx=9 -tzip -y -r $outputZipPath "$SymPath"
+    } else {
+    	Write-Output "No Debugging Symbols Found..."
+    }
+    	
+}
+else {
+    Write-Output "We will not package debug symbols for this configuration $($ConfigurationName)"
+}
+
+Write-Output ""

Tools/appveyor_publish_build.ps1

@@ -0,0 +1,83 @@
+if([string]::IsNullOrEmpty($Env:APPVEYOR_BUILD_FOLDER)) {
+    Write-Output "NOT running via Appveyor - Exiting"
+    Throw "NOT running via Appveyor - Exiting"
+}
+
+$appvDir = $Env:APPVEYOR_BUILD_FOLDER
+	
+$SIGCHECK="Tools\exes\sigcheck.exe"
+$SEVENZIP="Tools\7zip\7za.exe"
+
+Write-Output "Appveyor Build Dir: '$($appvDir)'"
+
+Write-Output "Decrypt Cert"
+& appveyor-tools\secure-file -decrypt "$($Env:cert_path).enc" -secret "$Env:cert_decrypt_pwd"
+
+if(-Not (Test-Path $Env:cert_path)) {
+		Write-Output "decrypt cert does not exist..."
+		Throw "Could not decrypt cert"
+}
+
+Write-Output "Restoring NuGets"
+& nuget restore
+
+
+Write-Output "Build Release Installer"
+& msbuild "$($appvDir)\mRemoteV1.sln" /nologo /t:Clean,Build /p:Configuration="Release Installer" /p:Platform=x86 /p:CertPath="$($Env:cert_path)" /p:CertPassword="$Env:cert_pwd" /m /verbosity:normal /logger:"C:\Program Files\AppVeyor\BuildAgent\Appveyor.MSBuildLogger.dll"
+
+Write-Output "Packaging debug symbols"
+   
+$version = & $SIGCHECK /accepteula -q -n "mRemoteV1\bin\Release\mRemoteNG.exe"
+
+Write-Output "Version is $($version)"
+
+$zipFilePrefix = "mRemoteNG-symbols"
+
+
+$outputZipPath="Release\$zipFilePrefix-$($version).zip"
+
+Write-Output "Creating debug symbols ZIP file $($outputZipPath)"
+Remove-Item -Force  $outputZipPath -ErrorAction SilentlyContinue
+$SymPath = (Join-Path -Path "mRemoteV1\bin\Release" -ChildPath "*.pdb")
+if(Test-Path "$SymPath") {
+	& $SEVENZIP a -bt -bd -bb1 -mx=9 -tzip -y -r $outputZipPath "$SymPath"
+} else {
+	Write-Output "No Debugging Symbols Found..."
+}
+    
+
+Write-Output "Build Release Portable"
+& msbuild "$($appvDir)\mRemoteV1.sln" /nologo /t:Clean,Build /p:Configuration="Release Portable" /p:Platform=x86 /p:CertPath="$($Env:cert_path)" /p:CertPassword="$Env:cert_pwd" /m /verbosity:normal /logger:"C:\Program Files\AppVeyor\BuildAgent\Appveyor.MSBuildLogger.dll"
+
+
+Write-Output "Packaging Release Portable ZIP"
+
+$version = & $SIGCHECK /accepteula -q -n "mRemoteV1\bin\Release Portable\mRemoteNG.exe"
+
+Write-Output "Version is $($version)"
+
+$zipFilePrefix = "mRemoteNG-Portable-symbols"
+$outputZipPath="Release\$zipFilePrefix-$($version).zip"
+
+Write-Output "Creating debug symbols ZIP file $($outputZipPath)"
+Remove-Item -Force  $outputZipPath -ErrorAction SilentlyContinue
+$SymPath = (Join-Path -Path "mRemoteV1\bin\Release Portable" -ChildPath "*.pdb")
+if(Test-Path "$SymPath") {
+	& $SEVENZIP a -bt -bd -bb1 -mx=9 -tzip -y -r $outputZipPath "$SymPath"
+} else {
+	Write-Output "No Debugging Symbols Found..."
+}
+
+$PortableZip="Release\mRemoteNG-Portable-$($version).zip"
+
+Remove-Item -Recurse "mRemoteV1\bin\package" -ErrorAction SilentlyContinue | Out-Null
+New-Item "mRemoteV1\bin\package" -ItemType  "directory" | Out-Null
+
+Copy-Item "mRemoteV1\Resources\PuTTYNG.exe" -Destination "mRemoteV1\bin\package"
+
+Copy-Item "mRemoteV1\bin\Release Portable\*" -Destination "mRemoteV1\bin\package" -Recurse  -Force 
+Copy-Item "*.txt" -Destination "mRemoteV1\bin\package"
+
+Write-Output "Creating portable ZIP file $($PortableZip)"
+Remove-Item -Force  $PortableZip -ErrorAction SilentlyContinue
+& $SEVENZIP a -bt -bd -bb1 -mx=9 -tzip -y -r $PortableZip ".\mRemoteV1\bin\package\*.*"

Tools/build-relport.cmd

@@ -5,7 +5,7 @@ setlocal enabledelayedexpansion
 set SOLUTIONDIR=%~dp0..
 
 rem Windows Sysinternals Sigcheck from http://technet.microsoft.com/en-us/sysinternals/bb897441
-set SIGCHECK="%SOLUTIONDIR%\Tools\sigcheck.exe"
+set SIGCHECK="%SOLUTIONDIR%\Tools\exes\sigcheck.exe"
 set SEVENZIP="%SOLUTIONDIR%\Tools\7zip\7za.exe"
 
 set VCVARSALL="%ProgramFiles(x86)%\Microsoft Visual Studio 14.0\VC\vcvarsall.bat"

Tools/copy_puttyng.ps1

@@ -0,0 +1,15 @@
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $SolutionDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetDir
+)
+
+Write-Output "===== Beginning $($PSCmdlet.MyInvocation.MyCommand) ====="
+Write-Output "Copying PUTTYNG to correct directory"
+Copy-Item -Path (Join-Path -Path $SolutionDir -ChildPath "mRemoteV1\Resources\PuTTYNG.exe") -Destination $TargetDir -Force
+
+Write-Output ""

Tools/copy_release_installer.ps1

@@ -1,16 +1,21 @@
-$sourcePath = $args[0]
-$destinationDir = $args[1]
+param (
+    [string]
+    $SourcePath,
 
-Write-Host $sourcePath
-Write-Host $destinationDir
+    [string]
+    $DestinationDir
+)
 
-if (!(Test-Path -Path $destinationDir))
+Write-Host $SourcePath
+Write-Host $DestinationDir
+
+if (!(Test-Path -Path $DestinationDir))
 {
-    New-Item -Path $destinationDir -ItemType "directory"
+    New-Item -Path $DestinationDir -ItemType "directory"
 }
 
-$sourceFiles = Get-ChildItem -Path $sourcePath -Recurse | ?{$_.Extension -match "exe|msi"}
+$sourceFiles = Get-ChildItem -Path $SourcePath -Recurse | ?{$_.Extension -match "exe|msi"}
 foreach ($item in $sourceFiles)
 {
-    Copy-Item -Path $item.FullName -Destination $destinationDir -Force
+    Copy-Item -Path $item.FullName -Destination $DestinationDir -Force
 }

Tools/copy_themes.ps1

@@ -0,0 +1,19 @@
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $SolutionDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetDir
+)
+
+Write-Output "===== Beginning $($PSCmdlet.MyInvocation.MyCommand) ====="
+Write-Output "Copying THEMES folder to output"
+
+$sourceFiles = [io.path]::combine($SolutionDir , 'mRemoteV1\Resources\Themes' ) 
+$DestinationDir = [io.path]::combine($TargetDir , 'Themes') 
+
+robocopy $sourceFiles $DestinationDir *.vstheme /s
+
+Write-Output ""

Tools/copy_tiles.ps1

@@ -0,0 +1,17 @@
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $SolutionDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetDir
+)
+
+Write-Output "===== Beginning $($PSCmdlet.MyInvocation.MyCommand) ====="
+Write-Output "Copying TILES folder to output"
+
+$sourceFiles = [io.path]::combine($SolutionDir , 'mRemoteV1\Resources\Tiles' ) 
+robocopy $sourceFiles $TargetDir *.*
+
+Write-Output ""

Tools/create_upg_chk_files.ps1

@@ -0,0 +1,109 @@
+#Requires -Version 4.0
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TagName,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    [ValidateSet("Stable","Beta","Development")]
+    $UpdateChannel
+)
+
+
+
+function New-MsiUpdateFileContent {
+    param (
+        [System.IO.FileInfo]
+        [Parameter(Mandatory=$true)]
+        $MsiFile,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        $TagName
+    )
+    
+    $version = $MsiFile.BaseName -replace "[a-zA-Z-]*"
+    $certThumbprint = (Get-AuthenticodeSignature -FilePath $MsiFile).SignerCertificate.Thumbprint
+    $hash = Get-FileHash -Algorithm SHA512 $MsiFile | % { $_.Hash }
+
+    $fileContents = `
+"Version: $version
+dURL: https://github.com/mRemoteNG/mRemoteNG/releases/download/$TagName/$($MsiFile.Name)
+clURL: https://raw.githubusercontent.com/mRemoteNG/mRemoteNG/$TagName/CHANGELOG.md
+CertificateThumbprint: $certThumbprint
+Checksum: $hash"
+    Write-Output $fileContents
+}
+
+
+function New-ZipUpdateFileContent {
+    param (
+        [System.IO.FileInfo]
+        [Parameter(Mandatory=$true)]
+        $ZipFile,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        $TagName
+    )
+    
+    $version = $ZipFile.BaseName -replace "[a-zA-Z-]*"
+    $hash = Get-FileHash -Algorithm SHA512 $ZipFile | % { $_.Hash }
+
+    $fileContents = `
+"Version: $version
+dURL: https://github.com/mRemoteNG/mRemoteNG/releases/download/$TagName/$($ZipFile.Name)
+clURL: https://raw.githubusercontent.com/mRemoteNG/mRemoteNG/$TagName/CHANGELOG.TXT
+Checksum: $hash"
+    Write-Output $fileContents
+}
+
+
+function Resolve-UpdateCheckFileName {
+    param (
+        [string]
+        [Parameter(Mandatory=$true)]
+        [ValidateSet("Stable","Beta","Development")]
+        $UpdateChannel,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        [ValidateSet("Normal","Portable")]
+        $Type
+    )
+
+    $fileName = ""
+
+    if ($UpdateChannel -eq "Beta") { $fileName += "beta-" }
+    elseif ($UpdateChannel -eq "Development") { $fileName += "dev-" }
+
+    $fileName += "update"
+
+    if ($Type -eq "Portable") { $fileName += "-portable" }
+
+    $fileName += ".txt"
+
+    Write-Output $fileName
+}
+
+
+
+
+
+$releaseFolder = Join-Path -Path $PSScriptRoot -ChildPath "..\Release" -Resolve
+
+# build msi update file
+$msiFile = Get-ChildItem -Path "$releaseFolder\*.msi" | sort LastWriteTime | select -last 1
+$msiUpdateContents = New-MsiUpdateFileContent -MsiFile $msiFile -TagName $TagName
+$msiUpdateFileName = Resolve-UpdateCheckFileName -UpdateChannel $UpdateChannel -Type Normal
+Write-Output "`n`nMSI Update Check File Contents ($msiUpdateFileName)`n------------------------------"
+Tee-Object -InputObject $msiUpdateContents -FilePath "$releaseFolder\$msiUpdateFileName"
+
+
+# build zip update file
+$zipFile = Get-ChildItem -Path "$releaseFolder\*.zip" | sort LastWriteTime | select -last 1
+$zipUpdateContents = New-ZipUpdateFileContent -ZipFile $zipFile -TagName $TagName
+$zipUpdateFileName = Resolve-UpdateCheckFileName -UpdateChannel $UpdateChannel -Type Portable
+Write-Output "`n`nZip Update Check File Contents ($zipUpdateFileName)`n------------------------------"
+Tee-Object -InputObject $zipUpdateContents -FilePath "$releaseFolder\$zipUpdateFileName"

Tools/find_vstool.ps1

@@ -0,0 +1,61 @@
+[CmdletBinding()]
+
+param (
+    [string]
+    # Name of the file to find
+    $FileName
+)
+
+
+
+function EditBinCertificateIsValid() {
+    param (
+        [string]
+        $Path
+    )
+
+    # Verify file certificate
+    $valid_microsoft_cert_thumbprints = @(
+        "3BDA323E552DB1FDE5F4FBEE75D6D5B2B187EEDC",
+        "98ED99A67886D020C564923B7DF25E9AC019DF26",
+        "108E2BA23632620C427C570B6D9DB51AC31387FE",
+        "5EAD300DC7E4D637948ECB0ED829A072BD152E17"
+    )
+    $file_signature = Get-AuthenticodeSignature -FilePath $Path
+    if (($file_signature.Status -ne "Valid") -or ($valid_microsoft_cert_thumbprints -notcontains $file_signature.SignerCertificate.Thumbprint)) {
+        Write-Warning "Could not validate the signature of $Path"
+        return $false
+    } else {
+        return $true
+    }
+}
+
+
+function ToolCanBeExecuted {
+    param (
+        [string]
+        $Path
+    )
+    $null = & $Path
+    Write-Output ($LASTEXITCODE -gt 0)
+}
+
+$rootSearchPaths = @(
+    [System.IO.Directory]::EnumerateFileSystemEntries("C:\Program Files", "*Visual Studio*", [System.IO.SearchOption]::TopDirectoryOnly),
+    [System.IO.Directory]::EnumerateFileSystemEntries("C:\Program Files (x86)", "*Visual Studio*", [System.IO.SearchOption]::TopDirectoryOnly)
+)
+
+# Returns the first full path to the $FileName that our search can find
+foreach ($searchPath in $rootSearchPaths) {
+    foreach ($visualStudioFolder in $searchPath) {
+        Write-Verbose "Searching in folder '$visualStudioFolder'"
+        $matchingExes = [System.IO.Directory]::EnumerateFileSystemEntries($visualStudioFolder, $FileName, [System.IO.SearchOption]::AllDirectories)
+        foreach ($matchingExe in $matchingExes) {
+            if ((EditBinCertificateIsValid -Path $matchingExe) -and (ToolCanBeExecuted -Path $matchingExe)) {
+                return $matchingExe
+            }
+        }
+    }
+}
+
+Write-Error "Could not find any valid file by the name $FileName." -ErrorAction Stop

Tools/github_functions.ps1

@@ -0,0 +1,235 @@
+$githubUrl = 'https://api.github.com'
+# GitHub doesn't support the default powershell protocol (TLS 1.0)
+[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12
+
+function Publish-GitHubRelease {
+    param (
+        [string]
+        [Parameter(Mandatory=$true)]
+        #
+        $Owner,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        #
+        $Repository,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        #
+        $ReleaseTitle,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        #
+        $TagName,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        # Either the SHA of the commit to target or the branch name.
+        $TargetCommitish,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        #
+        $Description,
+
+        [bool]
+        [Parameter(Mandatory=$true)]
+        #
+        $IsDraft,
+
+        [bool]
+        [Parameter(Mandatory=$true)]
+        #
+        $IsPrerelease,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        # The OAuth2 token to use for authentication.
+        $AuthToken
+    )
+
+    $body = New-GitHubReleaseRequestBody -TagName $TagName -TargetCommitish $TargetCommitish -ReleaseTitle $ReleaseTitle -Description $Description -IsDraft $IsDraft -IsPrerelease $IsPrerelease
+    $req_publishRelease = Invoke-WebRequest -Uri "$githubUrl/repos/$Owner/$Repository/releases" -Method Post -Headers @{"Authorization"="token $AuthToken"} -Body $body -ErrorAction Stop
+    $response_publishRelease = ConvertFrom-Json -InputObject $req_publishRelease.Content
+
+    Write-Output $response_publishRelease
+}
+
+
+function Edit-GitHubRelease {
+    param (
+        [string]
+        #[Parameter(Mandatory=$true)]
+        #
+        $Owner,
+
+        [string]
+        #[Parameter(Mandatory=$true)]
+        #
+        $Repository,
+
+        [string]
+        #[Parameter(Mandatory=$true)]
+        #
+        $ReleaseId,
+
+        [string]
+        #
+        $ReleaseTitle,
+
+        [string]
+        #
+        $TagName,
+
+        [string]
+        # Either the SHA of the commit to target or the branch name.
+        $TargetCommitish,
+
+        [string]
+        #
+        $Description,
+
+        [bool]
+        #
+        $IsDraft,
+
+        [bool]
+        #
+        $IsPrerelease,
+
+        [string]
+        #[Parameter(Mandatory=$true)]
+        # The OAuth2 token to use for authentication.
+        $AuthToken
+    )
+
+    $body_params = @{
+        "TagName" = $TagName
+        "TargetCommitish" = $TargetCommitish
+        "ReleaseTitle" = $ReleaseTitle
+        "Description" = $Description
+    }
+    if ($PSBoundParameters.ContainsKey("IsDraft")) { $body_params.Add("IsDraft", $IsDraft) }
+    if ($PSBoundParameters.ContainsKey("IsPrerelease")) { $body_params.Add("IsPrerelease", $IsPrerelease) }
+
+    $body = New-GitHubReleaseRequestBody @body_params
+    $req_editRelease = Invoke-WebRequest -Uri "$githubUrl/repos/$Owner/$Repository/releases/$ReleaseId" -Method Post -Headers @{"Authorization"="token $AuthToken"} -Body $body -ErrorAction Stop
+    $response_editRelease = ConvertFrom-Json -InputObject $req_editRelease.Content
+
+    Write-Output $response_editRelease
+}
+
+
+function Get-GitHubRelease {
+    param (
+        [string]
+        [Parameter(Mandatory=$true)]
+        #
+        $Owner,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        #
+        $Repository,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        #
+        $ReleaseId,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        # The OAuth2 token to use for authentication.
+        $AuthToken
+    )
+
+    $req_getRelease = Invoke-WebRequest -Uri "$githubUrl/repos/$Owner/$Repository/releases/$ReleaseId" -Method Get -Headers @{"Authorization"="token $AuthToken"} -ErrorAction Stop
+    $response_getRelease = ConvertFrom-Json -InputObject $req_getRelease.Content
+
+    Write-Output $response_getRelease
+}
+
+
+function Upload-GitHubReleaseAsset {
+    param (
+        [string]
+        [Parameter(Mandatory=$true)]
+        $UploadUri,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        # Path to the file to upload with the release
+        $FilePath,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        # Content type of the file
+        $ContentType,
+
+        [string]
+        [Parameter(Mandatory=$true)]
+        # The OAuth2 token to use for authentication.
+        $AuthToken,
+
+        [string]
+        # A short description label for the asset
+        $Label = ""
+    )
+
+    $UploadUri = $UploadUri -replace "(\{[\w,\?]*\})$"
+    $files = Get-Item -Path $FilePath
+
+    $labelParam = ""
+    if ($Label -ne "") {
+        $labelParam = "&label=$Label"
+    }
+
+    # Get-Item could produce an array of files if a wildcard is provided. (C:\*.txt)
+    # Upload each matching item individually
+    foreach ($file in $files) {
+        Write-Output "Uploading asset to GitHub release: '$($file.FullName)'"
+        $req_uploadZipAsset = Invoke-WebRequest -Uri "$($UploadUri)?name=$($file.Name)$labelParam" -Method Post -Headers @{"Authorization"="token $AuthToken"} -ContentType $ContentType -InFile $file.FullName -ErrorAction Stop
+    }
+}
+
+
+function New-GitHubReleaseRequestBody {
+    param (
+        [string]
+        # 
+        $TagName,
+
+        [string]
+        # Either the SHA of the commit to target or the branch name.
+        $TargetCommitish,
+
+        [string]
+        # Title of the release
+        $ReleaseTitle,
+
+        [string]
+        # Description of the release
+        $Description,
+
+        [bool]
+        # Is this a draft?
+        $IsDraft,
+
+        [bool]
+        # Is this a pre-release?
+        $IsPrerelease
+    )
+
+    $body_params = [ordered]@{}
+    if ($TagName -ne "")         { $body_params.Add("tag_name", $TagName) }
+    if ($TargetCommitish -ne "") { $body_params.Add("target_commitish", $TargetCommitish) }
+    if ($ReleaseTitle -ne "")    { $body_params.Add("name", $ReleaseTitle) }
+    if ($Description -ne "")     { $body_params.Add("body", $Description) }
+    if ($PSBoundParameters.ContainsKey("IsDraft"))         { $body_params.Add("draft", $IsDraft) }
+    if ($PSBoundParameters.ContainsKey("IsPrerelease"))    { $body_params.Add("prerelease", $IsPrerelease) }
+
+    $json_body = ConvertTo-Json -InputObject $body_params -Compress
+    Write-Output $json_body
+}

Tools/postbuild_installer.ps1

@@ -0,0 +1,44 @@
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $SolutionDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetFileName,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $ConfigurationName,
+
+    [string]
+    $CertificatePath,
+
+    [string]
+    $CertificatePassword,
+
+    [string[]]
+    $ExcludeFromSigning
+)
+
+Write-Output "+=================================================================+"
+Write-Output "|             Beginning mRemoteNG Installer Post Build            |"
+Write-Output "+=================================================================+"
+Format-Table -AutoSize -Wrap -InputObject @{
+    "SolutionDir" = $SolutionDir
+    "TargetDir" = $TargetDir
+    "TargetFileName" = $TargetFileName
+    "ConfigurationName" = $ConfigurationName
+    "CertificatePath" = $CertificatePath
+    "ExcludeFromSigning" = $ExcludeFromSigning
+}
+
+
+& "$PSScriptRoot\sign_binaries.ps1" -TargetDir $TargetDir -CertificatePath $CertificatePath -CertificatePassword $CertificatePassword -ConfigurationName $ConfigurationName -Exclude $ExcludeFromSigning -SolutionDir $SolutionDir
+& "$PSScriptRoot\verify_binary_signatures.ps1" -TargetDir $TargetDir -ConfigurationName $ConfigurationName -CertificatePath $CertificatePath -SolutionDir $SolutionDir
+& "$PSScriptRoot\rename_installer_with_version.ps1" -SolutionDir $SolutionDir
+& "$PSScriptRoot\copy_release_installer.ps1" -SourcePath $TargetDir -DestinationDir (Join-Path -Path $SolutionDir -ChildPath "Release")

Tools/postbuild_mremotev1.ps1

@@ -0,0 +1,52 @@
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $SolutionDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetFileName,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $ConfigurationName,
+
+    [string]
+    $CertificatePath,
+
+    [string]
+    $CertificatePassword,
+
+    [string[]]
+    $ExcludeFromSigning
+)
+
+Write-Output "+=================================================================+"
+Write-Output "|                  Beginning mRemoteV1 Post Build                 |"
+Write-Output "+=================================================================+"
+Format-Table -AutoSize -Wrap -InputObject @{
+    "SolutionDir" = $SolutionDir
+    "TargetDir" = $TargetDir
+    "TargetFileName" = $TargetFileName
+    "ConfigurationName" = $ConfigurationName
+    "CertificatePath" = $CertificatePath
+    "ExcludeFromSigning" = $ExcludeFromSigning
+}
+
+
+
+& "$PSScriptRoot\copy_puttyng.ps1" -SolutionDir $SolutionDir -TargetDir $TargetDir
+& "$PSScriptRoot\copy_themes.ps1" -SolutionDir $SolutionDir -TargetDir $TargetDir
+& "$PSScriptRoot\copy_tiles.ps1" -SolutionDir $SolutionDir -TargetDir $TargetDir
+& "$PSScriptRoot\sphinx_docs.ps1" -SolutionDir $SolutionDir -TargetDir $TargetDir
+& "$PSScriptRoot\set_LargeAddressAware.ps1" -TargetDir $TargetDir -TargetFileName $TargetFileName
+& "$PSScriptRoot\verify_LargeAddressAware.ps1" -TargetDir $TargetDir -TargetFileName $TargetFileName
+& "$PSScriptRoot\tidy_files_for_release.ps1" -TargetDir $TargetDir -ConfigurationName $ConfigurationName
+& "$PSScriptRoot\sign_binaries.ps1" -TargetDir $TargetDir -CertificatePath $CertificatePath -CertificatePassword $CertificatePassword -ConfigurationName $ConfigurationName -Exclude $ExcludeFromSigning -SolutionDir $SolutionDir
+& "$PSScriptRoot\verify_binary_signatures.ps1" -TargetDir $TargetDir -ConfigurationName $ConfigurationName -CertificatePath $CertificatePath -SolutionDir $SolutionDir
+& "$PSScriptRoot\zip_symbols.ps1" -SolutionDir $SolutionDir -TargetDir $TargetDir -ConfigurationName $ConfigurationName
+& "$PSScriptRoot\zip_portable_files.ps1" -SolutionDir $SolutionDir -TargetDir $TargetDir -ConfigurationName $ConfigurationName

Tools/publish_draft_github_release.ps1

@@ -0,0 +1,25 @@
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    #
+    $Owner,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    #
+    $Repository,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    #
+    $ReleaseId,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    # The OAuth2 token to use for authentication.
+    $AuthToken
+)
+
+. "$PSScriptRoot\github_functions.ps1"
+
+Edit-GitHubRelease -Owner $Owner -Repository $Repository -ReleaseId $ReleaseId -AuthToken $AuthToken -IsDraft $false

Tools/publish_to_github.ps1

@@ -0,0 +1,81 @@
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    #
+    $Owner,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    #
+    $Repository,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    #
+    $ReleaseTitle,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    #
+    $TagName,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    # Either the SHA of the commit to target or the branch name.
+    $TargetCommitish,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    #
+    $Description,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    [ValidateSet("true","false")]
+    # true/false
+    $IsDraft,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    [ValidateSet("true","false")]
+    # true/false
+    $IsPrerelease,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    # Path to the folder which contains release assets to upload
+    $ReleaseFolderPath,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    # The OAuth2 token to use for authentication.
+    $AuthToken,
+
+    [switch]
+    # Enable this switch to treat $Description as a Base64 encoded string. It will be decoded before being used elsewhere in the script.
+    $DescriptionIsBase64Encoded
+)
+
+
+if ($DescriptionIsBase64Encoded) {
+    $Description = ([System.Text.Encoding]::UTF8.GetString([System.Convert]::FromBase64String($Description)))
+}
+
+
+. "$PSScriptRoot\github_functions.ps1"
+
+
+$releaseFolderItems = Get-ChildItem -Path $ReleaseFolderPath
+$mrngPortablePath = ($releaseFolderItems | ?{$_.Name -match "portable-[\d\.]+\.zip"}).FullName
+$mrngNormalPath = ($releaseFolderItems | ?{$_.Name -match "installer-[\d\.]+\.msi"}).FullName
+$mrngPortableSymbolsPath = ($releaseFolderItems | ?{$_.Name -match "mremoteng-portable-symbols-[\d\.]+\.zip"}).FullName
+$mrngNormalSymbolsPath = ($releaseFolderItems | ?{$_.Name -match "mremoteng-symbols-[\d\.]+\.zip"}).FullName
+
+
+$release = Publish-GitHubRelease -Owner $Owner -Repository $Repository -ReleaseTitle $ReleaseTitle -TagName $TagName -TargetCommitish $TargetCommitish -Description $Description -IsDraft ([bool]::Parse($IsDraft)) -IsPrerelease ([bool]::Parse($IsPrerelease)) -AuthToken $AuthToken
+$zipUpload = Upload-GitHubReleaseAsset -UploadUri $release.upload_url -FilePath $mrngPortablePath -ContentType "application/zip" -AuthToken $AuthToken -Label "Portable Edition (zip)"
+$msiUpload = Upload-GitHubReleaseAsset -UploadUri $release.upload_url -FilePath $mrngNormalPath -ContentType "application/octet-stream" -AuthToken $AuthToken -Label "Normal Edition (msi)"
+
+$portableEditionSymbols = Upload-GitHubReleaseAsset -UploadUri $release.upload_url -FilePath $mrngPortableSymbolsPath -ContentType "application/zip" -AuthToken $AuthToken -Label "Portable Edition Debug Symbols"
+$normalEditionSymbols = Upload-GitHubReleaseAsset -UploadUri $release.upload_url -FilePath $mrngNormalSymbolsPath -ContentType "application/zip" -AuthToken $AuthToken -Label "Normal Edition Debug Symbols"
+Write-Output (Get-GitHubRelease -Owner $Owner -Repository $Repository -ReleaseId $release.id -AuthToken $AuthToken)

Tools/rename_installer_with_version.ps1

@@ -1,11 +1,15 @@
-$solutionDir = $args[0]
-$renameTarget = $solutionDir + "InstallerProjects\Installer\bin\Release\en-US\mRemoteNG-Installer.msi"
+param (
+    [string]
+    $SolutionDir
+)
 
-Write-Host $solutionDir
+$renameTarget = $SolutionDir + "InstallerProjects\Installer\bin\Release\en-US\mRemoteNG-Installer.msi"
+
+Write-Host $SolutionDir
 Write-Host $renameTarget
 
-$targetVersionedFile = "$solutionDir\mRemoteV1\bin\Release\mRemoteNG.exe"
-$version = &"$solutionDir\Tools\sigcheck.exe" /accepteula -q -n $targetVersionedFile
+$targetVersionedFile = "$SolutionDir\mRemoteV1\bin\Release\mRemoteNG.exe"
+$version = &"$SolutionDir\Tools\exes\sigcheck.exe" /accepteula -q -n $targetVersionedFile
 
 
 $renameTargetFileObject = Get-Item -Path $renameTarget -ErrorAction SilentlyContinue

Tools/set_LargeAddressAware.ps1

@@ -0,0 +1,22 @@
+[CmdletBinding()]
+
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetFileName
+)
+
+Write-Output "===== Beginning $($PSCmdlet.MyInvocation.MyCommand) ====="
+
+$path_editBin = Join-Path -Path $PSScriptRoot -ChildPath "exes\editbin.exe"
+$path_outputExe = Join-Path -Path $TargetDir -ChildPath $TargetFileName
+
+# Set LargeAddressAware
+Write-Output "Setting LargeAddressAware on binary file:`n`"$path_outputExe`" `nwith:`n`"$path_editBin`""
+& "$path_editBin" /largeaddressaware "$path_outputExe"
+
+Write-Output ""

Tools/sign_binaries.ps1

@@ -0,0 +1,88 @@
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $ConfigurationName,
+
+    [string[]]
+    # File names to exclude from signing
+    $Exclude,
+
+    [string]
+    [AllowEmptyString()]
+    # The code signing certificate to use when signing the files.
+    $CertificatePath,
+
+    [string]
+    # Password to unlock the code signing certificate.
+    $CertificatePassword,
+    
+    [string]
+    $SolutionDir
+)
+
+Write-Output "===== Beginning $($PSCmdlet.MyInvocation.MyCommand) ====="
+
+
+$timeserver = "http://timestamp.verisign.com/scripts/timstamp.dll"
+
+
+#  validate release versions and if the certificate value was passed
+if ($ConfigurationName -match "Release" -And ($CertificatePath)) {
+
+	if(-Not ([string]::IsNullOrEmpty($Env:APPVEYOR_BUILD_FOLDER)) ) {
+		$CertificatePath = Join-Path -Path $SolutionDir -ChildPath $CertificatePath
+	}
+
+	# make sure the cert is actually available
+	if ($CertificatePath -eq "" -or !(Test-Path -Path $CertificatePath -PathType Leaf))
+	{
+	    Write-Output "Certificate is not present - we won't sign files."
+	    return
+	}
+
+	if ($CertificatePassword -eq "") {
+	    Write-Output "No certificate password was provided - we won't sign files."
+	    return
+	}
+
+	try {
+	    $certKeyStore = [System.Security.Cryptography.X509Certificates.X509KeyStorageFlags]::MachineKeySet
+	    $cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2($CertificatePath, $CertificatePassword, $certKeyStore) -ErrorAction Stop
+	} catch {
+	    Write-Output "Error loading certificate file - we won't sign files."
+	    Write-Output $Error[0]
+	    return
+	}
+
+	# Sign MSI if we are building a release version and the certificate is available
+	Write-Output "Signing Binaries"
+	Write-Output "Getting files from path: $TargetDir"
+	$signableFiles = Get-ChildItem -Path $TargetDir -Recurse | ?{$_.Extension -match "dll|exe|msi"} | ?{$Exclude -notcontains $_.Name}
+
+	$excluded_files = Get-ChildItem -Path $TargetDir -Recurse | ?{$_.Extension -match "dll|exe|msi"} | ?{$Exclude -contains $_.Name}
+	$excluded_files | ForEach-Object `
+	    -Begin { Write-Output "The following files were excluded from signing due to being on the exclusion list:" } `
+	    -Process { Write-Output "-- $($_.FullName)" }
+
+	Write-Output "Signable files count: $($signableFiles.Count)"
+
+
+	foreach ($file in $signableFiles) {
+	    Set-AuthenticodeSignature -Certificate $cert -TimestampServer $timeserver -IncludeChain all -FilePath $file.FullName
+	}
+
+
+	# Release certificate
+	if ($cert -ne $null) {
+	    $cert.Dispose()
+	}
+} else {
+    Write-Output "This is not a release build or CertificatePath wasn't provided - we won't sign files."
+    Write-Output "Config: $($ConfigurationName)`tCertPath: $($CertificatePath)"
+}
+
+Write-Output ""

Tools/signfiles.ps1

@@ -1,13 +1,31 @@
-$timeserver = "http://timestamp.verisign.com/scripts/timstamp.dll"
-$certPath = "C:\mRemoteNG_code_signing_cert.pfx"
-$certPassword = (Get-Credential -Message "Enter the password for the certificate" -UserName "USERNAME NOT NEEDED").Password
-$cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2($certPath, $certPassword)
-$targetPath = $args[0]
+param(
+    [string]
+    [Parameter(Mandatory=$true)]
+    # Folder path that contains the files you would like to sign. Recursive.
+    $PathToSignableFiles,
+
+    [string]
+    # The code signing certificate to use when signing the files.
+    $CertificatePath = "C:\mRemoteNG_code_signing_cert.pfx",
+
+    [SecureString]
+    # Password to unlock the code signing certificate.
+    $CertificatePassword = (Get-Credential -Message "Enter password for the mRemoteNG code signing certificate" -UserName "USERNAME NOT NEEDED").Password,
+
+    [string[]]
+    # File names to exclude from signing
+    $Exclude
+)
 
 
-Write-Output "Getting files from path: $targetPath"
-$signableFiles = Get-ChildItem -Path $targetPath -Recurse | ?{$_.Extension -match "dll|exe|msi"}
+$timeserver = "http://timestamp.verisign.com/scripts/timstamp.dll"
+$cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2($CertificatePath, $CertificatePassword)
+
+
+Write-Output "Getting files from path: $PathToSignableFiles"
+$signableFiles = Get-ChildItem -Path $PathToSignableFiles -Recurse | ?{$_.Extension -match "dll|exe|msi"} | ?{$Exclude -notcontains $_.Name}
 Write-Output "Signable files count: $($signableFiles.Count)"
+
 foreach ($file in $signableFiles) {
     Set-AuthenticodeSignature -Certificate $cert -TimestampServer $timeserver -IncludeChain all -FilePath $file.FullName
 }

Tools/sphinx_docs.ps1

@@ -0,0 +1,23 @@
+param (	
+	[string]
+    [Parameter(Mandatory=$true)]
+    $SolutionDir,
+	
+	[string]
+    [Parameter(Mandatory=$true)]
+    $TargetDir
+)
+
+Write-Output "===== Beginning $($PSCmdlet.MyInvocation.MyCommand) ====="
+
+Write-Output "Building HTML-Documentation with Sphinx"
+
+$path_HelpFilesDir = Join-Path -Path $TargetDir -ChildPath "Help"
+$path_SphinxSourceDir = Join-Path -Path $SolutionDir -ChildPath "mremoteV1\Documentation"
+# Remove stale Help files, if they exist
+if (Test-Path -Path $path_HelpFilesDir) {
+    Remove-Item -Path $path_HelpFilesDir -Recurse -Force
+}
+sphinx-build $path_SphinxSourceDir $path_HelpFilesDir
+
+Write-Output ""

Tools/tidy_files_for_release.ps1

@@ -0,0 +1,39 @@
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $ConfigurationName
+)
+
+Write-Output "===== Beginning $($PSCmdlet.MyInvocation.MyCommand) ====="
+
+# Remove unnecessary files from Release versions
+if ($ConfigurationName -match "Release") {
+    Write-Output "Removing unnecessary files from Release versions"
+
+    $test = Join-Path -Path $TargetDir -ChildPath "app.publish"
+    if (Test-Path  $test -PathType Container) {
+        Remove-Item -Path (Join-Path -Path $TargetDir -ChildPath "app.publish") -Recurse -Force
+    }
+
+    $filesToDelete = Get-ChildItem -Path $TargetDir -Recurse -Include @(
+        "*.publish",
+        "*.xml",
+        "*.backup",
+        "*.log",
+        "*vshost*",
+        "*.tmp"
+    ) -Exclude @(
+        "mRemoteNG.VisualElementsManifest.xml"
+	)
+    Remove-Item -Path $filesToDelete.FullName
+    Write-Output $filesToDelete.FullName
+}
+else {
+    Write-Output "We will not remove anything - this is not a release build."
+}
+
+Write-Output ""

Tools/validate_microsoft_tool.ps1

@@ -0,0 +1,17 @@
+# $FullPath Full path to the Microsoft executable to validate
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $FullPath
+)
+
+$validMSCertThumbprints = @("3BDA323E552DB1FDE5F4FBEE75D6D5B2B187EEDC", "108E2BA23632620C427C570B6D9DB51AC31387FE", "98ED99A67886D020C564923B7DF25E9AC019DF26", "5EAD300DC7E4D637948ECB0ED829A072BD152E17")
+$exeSignature = Get-AuthenticodeSignature -FilePath $FullPath
+$baseErrorMsg = "Could not validate the certificate of $FullPath. "
+
+if ($exeSignature.Status -ne "Valid") {
+    Write-Error -Message ($baseErrorMsg+"The signature was invalid.") -ErrorAction Stop
+}
+elseif ($validMSCertThumbprints -notcontains $exeSignature.SignerCertificate.Thumbprint) {
+    Write-Error -Message ($baseErrorMsg+"The certificate thumbprint ($($exeSignature.SignerCertificate.Thumbprint)) is not trusted.") -ErrorAction Stop
+}

Tools/verify_LargeAddressAware.ps1

@@ -0,0 +1,30 @@
+[CmdletBinding()]
+
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetFileName
+)
+
+Write-Output "===== Beginning $($PSCmdlet.MyInvocation.MyCommand) ====="
+
+$path_dumpBin = Join-Path -Path $PSScriptRoot -ChildPath "exes\dumpbin.exe"
+$path_outputExe = Join-Path -Path $TargetDir -ChildPath $TargetFileName
+
+# Dump exe header
+$output = & "$path_dumpBin" /NOLOGO /HEADERS "$path_outputExe" | Select-String large
+
+if ($output -eq $null)
+{
+    Write-Warning "Could not validate LargeAddressAware"
+}
+else
+{
+    Write-Output $output.ToString().TrimStart(" ")
+}
+
+Write-Output ""

Tools/verify_binary_signatures.ps1

@@ -0,0 +1,59 @@
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $ConfigurationName,
+    
+    [string]
+    [Parameter(Mandatory=$true)]
+    [AllowEmptyString()]
+    # The code signing certificate to use when signing the files.
+    $CertificatePath,
+    
+    [string]
+    [Parameter(Mandatory=$true)]
+    $SolutionDir
+)
+
+Write-Output "===== Beginning $($PSCmdlet.MyInvocation.MyCommand) ====="
+
+#  validate release versions and if the certificate value was passed
+if ($ConfigurationName -match "Release" -And ($CertificatePath)) {
+	
+	if(-Not ([string]::IsNullOrEmpty($Env:APPVEYOR_BUILD_FOLDER)) ) {
+		$CertificatePath = Join-Path -Path $SolutionDir -ChildPath $CertificatePath
+	}
+	
+	# make sure the cert is actually available
+	if ($CertificatePath -eq "" -or !(Test-Path -Path $CertificatePath -PathType Leaf))
+	{
+	    Write-Output "Certificate is not present - files likely not signed - we won't verify file signatures."
+	    return
+	}
+		
+    Write-Output "Verifying signature of binaries"
+    Write-Output "Getting files from path: $TargetDir"
+    $signableFiles = Get-ChildItem -Path $TargetDir -Recurse | ?{$_.Extension -match "dll|exe|msi"}
+    Write-Output "Signable files count: $($signableFiles.Count)"
+    $badSignatureFound = $false
+    foreach ($file in $signableFiles) {
+        $signature = Get-AuthenticodeSignature -FilePath $file.FullName
+        if ($signature.Status -ne "Valid") {
+            Write-Warning "File $($file.FullName) does not have a valid signature."
+            $badSignatureFound = $true
+        }
+    }
+    if ($badSignatureFound) {
+        Write-Output "One or more files were improperly signed."
+    } else {
+        Write-Output "All files have valid signatures."
+    }
+} else {
+    Write-Output "This is not a release build or CertificatePath wasn't provided - we won't verify file signatures."
+    Write-Output "Config: $($ConfigurationName)`tCertPath: $($CertificatePath)"
+}
+
+Write-Output ""

Tools/zip_portable_files.ps1

@@ -0,0 +1,64 @@
+param (
+    [string]
+    [Parameter(Mandatory=$true)]
+    $SolutionDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $TargetDir,
+
+    [string]
+    [Parameter(Mandatory=$true)]
+    $ConfigurationName
+)
+
+Write-Output "===== Beginning $($PSCmdlet.MyInvocation.MyCommand) ====="
+
+if(-not [string]::IsNullOrEmpty($Env:APPVEYOR_BUILD_FOLDER)) {
+    Write-Output "Too early to run via Appveyor - artifacts don't get generated properly. Exiting"
+    Exit
+}
+
+Write-Output "Solution Dir: '$($SolutionDir)'"
+Write-Output "Target Dir: '$($TargetDir)'"
+$ConfigurationName = $ConfigurationName.Trim()
+Write-Output "Config Name (tirmmed): '$($ConfigurationName)'"
+
+
+# Windows Sysinternals Sigcheck from http://technet.microsoft.com/en-us/sysinternals/bb897441
+$SIGCHECK="$($SolutionDir)Tools\exes\sigcheck.exe"
+$SEVENZIP="$($SolutionDir)Tools\7zip\7za.exe"
+
+# Package Zip
+if ($ConfigurationName -eq "Release Portable") {
+    Write-Output "Packaging Release Portable ZIP"
+   
+    $version = & $SIGCHECK /accepteula -q -n "$($SolutionDir)mRemoteV1\bin\$($ConfigurationName)\mRemoteNG.exe"
+
+    Write-Output "Version is $($version)"
+
+    $PortableZip="$($SolutionDir)Release\mRemoteNG-Portable-$($version).zip"
+
+    $tempFolderPath = Join-Path -Path $SolutionDir -ChildPath "mRemoteV1\bin\package"
+    Remove-Item -Recurse $tempFolderPath -ErrorAction SilentlyContinue | Out-Null
+    New-Item $tempFolderPath -ItemType  "directory" | Out-Null
+    
+    Copy-Item "$($SolutionDir)mRemoteV1\Resources\PuTTYNG.exe" -Destination $tempFolderPath
+
+    #Write-Output "$($SolutionDir)mRemoteV1\bin\$ConfigurationName" 
+    #Write-Output "$($SolutionDir)mRemoteV1\bin\package"
+    Copy-Item "$($SolutionDir)mRemoteV1\bin\$ConfigurationName\*" -Destination $tempFolderPath -Recurse  -Force
+    # Delete any PDB files that accidentally get copied into the temp folder
+    Get-ChildItem -Path $tempFolderPath -Filter "*.pdb" | Remove-Item
+    Copy-Item "$($SolutionDir)*.txt" -Destination $tempFolderPath
+
+    Write-Output "Creating portable ZIP file $($PortableZip)"
+    Remove-Item -Force  $PortableZip -ErrorAction SilentlyContinue
+    & $SEVENZIP a -bt -bd -bb1 -mx=9 -tzip -y -r $PortableZip (Join-Path -Path $tempFolderPath -ChildPath "*.*")
+    #& $SEVENZIP a -bt -mx=9 -tzip -y $PortableZip "$($SolutionDir)*.TXT"
+}
+else {
+    Write-Output "We will not zip anything - this isnt a portable release build."
+}
+
+Write-Output ""